TP50-40/4 Brochure

The standard Grundfos Blueflux® motor in Grundfos
TP pumps is anything but standard. First of all,
Grundfos Blueflux® motors are the most ecient
motors available. They meet the highest IE3 standard
in the EuP directive for motors. Second, Grundfos
leads the way by featuring only Grundfos Blueflux®
motors as standard in our pumps.* The IE3 standard
motor is designed for maximum eciency at both
full-load and part-load operation. Thus, it has an
extremely high level of eciency over a broad
operations band and is the ideal motor for a variety of
application areas.
*Forsome60HzpumpsonlyIE2motorsarecurrentlyavailable.
The amazing
Grundfos Blueflux® motors
• Minimalheatdevelopment 
increases lubrication intervals and
winding insulation service life
• Lowbearingtemperaturesincrease
bearing service life
• Extremelylownoiselevelsdue
to advanced axial fan design
• Operationalathighambient
temperatures (up to +60°C). Normally
an ambient temperature above 40°C
requires one motor size bigger in order
to prevent overheating.
TP – GRUNDFOS
BLUEFLUX®
MOTORS MAKE
THE DIFFERENCE
If you are looking for the ultimate in-line pump on
the market, look no further than Grundfos TPE. These
highly adaptable, intelligent pumps feature integrated
frequency converters that ensure maximum eciency
atalltimes.AllTPEcomponentsaretailor-madeand
mutually optimised, resulting in energy savings of up
to 50% compared to conventional pumps.
Grundfos oers two concepts within E-pumps: the
TPE Series 1000 is the standard configuration of
E-pumps suitable for applications where a sensor in
the system controls the pressure, temperature or
flow rate.
The pumps within TPE Series 2000 are factory-set to
proportional pressure control and they continuously
adjust the pressure to fit the current demand.
TPE – PUMPS FOR LIFE
TP/TPE
DepenDabiliTy