Submittal Sheet

Company name:
Created by:
Phone:
Fax:
Date:
-
-
-
-
-
-
-
-
-
-
Printed from Grundfos CAPS [2011.05.069]
Position Count Description Unit price
-1 On
request
UP 43-75 BF
Product photo could vary from the actual product
Product No.: 52722370
The pump is of the canned rotor type, i.e. pump
and motor form an integral unit without shaft
seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid.
The pump is characterized by:
* Ceramic shaft and radial bearings.
* Carbon axial bearing.
* Stainless steel rotor can and bearing plate.
* Corrosion-resistant impeller, Composite, PES.
* Bronze pump housing.
The motor is a 1-phase motor.
No additional motor protection is required.
Liquid:
Liquid temperature range: 32 .. 230 °F
Density: 62.4 lb/ft³
Technical:
Maximum operating pressure: 145 psi
Approvals on nameplate: UL, CSA
Materials:
Pump housing: Bronze
DIN W.-Nr. 2.1176.01
Impeller: Composite, PES
Installation:
Maximum ambient temperature: 104 °F
Ambient max at 176°F liquid: 176 °F
Maximum operating pressure: 145 psi
Flange standard: USA Oval
Type of connection: Bronze Flange
Pipe connection: 2 - Bolt Flange
Pressure stage: 10
Port-to-port length: 8 1/2 in
Electrical data:
1/4

Summary of content (4 pages)