Specification

Company name:
Created by:
Phone:
Fax:
Date:
-
-
-
-
-
-
-
-
-
-
Printed from Grundfos CAPS
Position Count Description Unit price
1 On
request
UPS 26-99 FC
Product photo could vary from the actual product
Product No.: 52722512
The pump is of the canned rotor type, i.e. pump
and motor form an integral unit without shaft
seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid.
The pump is characterized by:
* Ceramic shaft and radial bearings.
* Carbon axial bearing.
* Stainless steel rotor can and bearing plate.
* Corrosion-resistant impeller, Composite, PES.
* Cast ironpump housing.
The motor is a 1-phase motor.
No additional motor protection is required.
Liquid:
Liquid temperature range: 35.6 .. 230 °F
Technical:
Maximum operating pressure: 145 psi
Approvals on nameplate: UL, CSA
Materials:
Pump housing: Cast iron
EN-JL1030
ASTM 30 B
Impeller: Composite, PES
Installation:
Maximum ambient temperature: 104 °F
Ambient max at 176°F liquid: 176 °F
Maximum operating pressure: 145 psi
Flange standard: USA Oval
Type of connection: C.I. Flange
Pipe connection: 2 - Bolt Flange
Pressure stage: 10
Port-to-port length: 6 1/2 in
Electrical data:
1/4

Summary of content (4 pages)