Submittal Sheet

ManualsBrandsGrundfos ManualsCooling & Air QualityUPS75-69F 2-Speed Cast Iron Circulator Pump 460V, 1-1/2 HP

Company name:

Created by:

Phone:

Fax:

Date:

Printed from Grundfos CAPS [2011.05.069]

Position Count Description Unit price

-1 On

request

UPS 75-69

Product photo could vary from the actual product

Product No.: 96654378

The pump is of the canned rotor type, i.e. pump

and motor form an integral unit without shaft

seal and with only two gaskets for sealing.

The bearings are lubricated by the pumped liquid.

In order to avoid problems in connection with

disposal, great importance has been attached to

using as few different materials as possible.

The pump is characterized by:

* 3-speed motor.

* Ceramic radial bearings.

* Carbon axial bearing.

* Stainless steel rotor can, bearing plate

and rotor cladding.

* Aluminium alloy stator housing.

* Cast iron pump housing.

* Stator with built-in thermal switch.

The motor is a 1-phase motor.

The pump is supplied with a standard

module in the terminal box.

The standard module is to be connected to the

mains supply via external contactor.

Controls:

Relay: with relay

Liquid:

Liquid temperature range: 14 .. 248 °F

Liquid temp: 68 °F

Technical:

Actual calculated flow: 74.2 US gpm

Resulting head of the pump: 34.5 ft

Maximum operating pressure: 145 psi

Approvals on nameplate: CUL

1/4

Summary of content (4 pages)

PAGE 1
Company name: Created by: Phone: Fax: Date: Position - Count Description Unit price -1 UPS 75-69 On request Product photo could vary from the actual product Product No.: 96654378 The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.
PAGE 2
Company name: Created by: Phone: Fax: Date: Position Count Description Materials: Pump housing: Impeller: Unit price Cast iron EN-JL1040 ASTM 35 B - 40 B Stainless steel DIN W.-Nr. 1.4301 AISI 304 Installation: Range of ambient temperature: Maximum operating pressure: Flange standard: Type of connection: Pipe connection: Pressure stage: Port-to-port length: 32 .. 104 °F 145 psi USA F 75 145 psi 14 1/4" mm Electrical data: Power input in speed 1: Power input in speed 2: Max.
PAGE 3
Company name: Created by: Phone: Fax: Date: Description Product name: Product Number: EAN number: Value UPS 75-69 F 96654378 5700836884953 Technical: Speed Number: Actual calculated flow: Resulting head of the pump: Head max: Maximum operating pressure Approvals on nameplate: Model: 3 74.2 US gpm 34.5 ft 22.6 ft 145 psi CUL C UPS 75-69 F, 60 Hz Pumped liquid = Water Liquid temperature = 68 °F Density = 62.4 lb/ft³ 30 20 10 0 0 P1 (kW) Cast iron EN-JL1040 ASTM 35 B - 40 B Stainless steel DIN W.-Nr. 1.
PAGE 4
Company name: Created by: Phone: Fax: Date: - 96654378 UPS 75-69 F 60 Hz 4" 4 5/16" 6" 2 15/16" 7 1/2" 3 1/2" 12/16" 14 1/4" 10 13/16" 6 5/8" NPT 1/4 5 11/16" 2 15/16" 13 1/2" M12 4 1/2" 3 15/16" 3 15/16" 7 1/8" 3 4 Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos CAPS [2011.05.