Submittal Sheet

ManualsBrandsGrundfos ManualsCooling & Air QualityUP10-16BN5/LC, 115V Pump

Nomenclature

B - Brass, lead free pump housing

5 - ½" Copper Pipe, Female sweat fittings

N5 - ½" NPT - Female thread fitting

U - Union connection, 1¼" NPSM with

Isolation valve & check valve.

A - Thermostat

T - 12-hour timer

LC - Line cord and plug

FOR OPEN SYSTEMS - 140°F (60°C) Is the maximum recommended fluid temperature

to avoid precipitation of calcium in water.

Ambient Air Temp. 149°F (65°C) 169°F (75°C)

Maximum Water Temp. 203°F (95°C) 176°F (80°C)

MINIMUM REQUIRED INLET PRESSURE:

Temperature 203°F (95°C) 185°F (85°C)

Pressure 9 Ft. (2.8m) 1.6 Ft. (0.5m)

4.0 psi 0.7 psi

MOTOR: A green light on the motor is on

when power is supplied to the pump.

TIMER: 12-hour AM/PM, 20 minute interval.

3 positions (ON/TIMER/OFF).

Mounting Positions

QUANTITY TAG NO. MODEL NO. GPM FEET VOLT PHASE COMMENTS

JOB or CUSTOMER:

ENGINEER:

CONTRACTOR:

SUBMITTED BY: DATE:

APPROVED BY: DATE:

ORDER NO: DATE:

SPECIFICATION REF:

Submittal Data 60 Cycle

Wet-Rotor, In-Line, Single Stage, Maintenance Free,

Circulator Pumps

FOR INDOOR USE ONLY

DO NOT

Mount in this

Position

Series UP

Comfort

Dimensions and Weights

UP 10-16B5/BN5 UP 10-16BU

Technical Data

FLOW RANGE: 0 – 3 U.S. GPM MINIMUM FLUID TEMPERATURE: 36°F (2°C)

HEAD RANGE: 0 – 5.4 Feet MAXIMUM FLUID TEMPERATURE: 203°F (95°C)

MOTORS: Single Phase, 115V MAXIMUM WORKING PRESSURE: 145 PSI

Model Type L1 L2 H1 H2 H3 H4 B1 B2 Wt. Lbs Connection

UP 10-16 B5/LC 3 1/8 1 1/2 5 1/4 33 1/3 2.9 Sweat 1/2"

UP 10-16 B5/TLC 3 1/8 3 1/2 1 1/2 8 1/16 33 1/3 3.4 Sweat 1/2"

UP 10-16 B5/ATLC 3 1/8 3 1/2 1 1/2 8 1/16 33 1/3 3.4 Sweat 1/2"

UP 10-16 BN5/LC 3 1/8 1 1/2 5 1/4 33 1/3 2.9 NPT 1/2"

UP 10-16 BN5/TLC 3 1/8 3 1/2 1 1/2 8 1/16 33 1/3 3.4 NPT 1/2"

UP 10-16 BN5/ATLC 3 1/8 3 1/2 1 1/2 8 1/16 33 1/3 3.4 NPT 1/2"

UP 10-16 BU/LC 4 1/3 1 7/8 5 1/4 33 1/3 3.4 Union - 11/4" NPSM

UP 10-16 BU/TLC 4 1/3 1 7/8 8 1/16 33 1/3 3.8 Union - 11/4" NPSM

UP 10-16 BU/ATLC 4 1/3 1 7/8 8 1/16 33 1/3 3.8 Union - 11/4" NPSM

Summary of content (2 pages)

PAGE 1
Series UP Comfort Wet-Rotor, In-Line, Single Stage, Maintenance Free, Circulator Pumps Submittal Data 60 Cycle JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: DATE: APPROVED BY: DATE: ORDER NO: DATE: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM FEET VOLT PHASE Technical Data FLOW RANGE: 0 – 3 U.S. GPM HEAD RANGE: 0 – 5.
PAGE 2
Performance Comfort UP 10-16BU HEAD (FT.) HEAD (FT.) Comfort UP 10-16B/B5 CAPACITY (US GPM) CAPACITY (US GPM) Electrical Data 1 X 115V P1 [W] 25 11/1 [A] 0.23 Electrical connection The pump is fitted with 5 foot cord & 115V plug. Motor protection Impedance-protected. No external motor protection required. Product Range Thermostat: The built-in thermostat can be set to stop the pump at a preset liquid temperature. The setting range is 95-150°F.