Brochure
Table Of Contents
- 1. Product introduction
- 2. Performance range
- 3. Product range
- 4. Identification
- 5. Construction
- 6. Operating conditions
- 7. Installation
- 8. Functions
- 9. Guide to performance curves
- 10. Performance curves and technical data
- 11. Accessories
- 12. Further product information
Accessories
MAGNA3
11
57
11. Accessories
Insulating for air-conditioning and
cooling systems
For cooling applications, if the supplied insulation shell
is to be used then a silicon sealant must be liberally
applied to the inside of the insulation shell to ensure all
air gaps are eliminated between the shell and pump
housing to prevent condensation inside the shell.
Fig. 57 Fitting the insulating shells to a MAGNA3 pump
CIM modules
A CIM module is an add-on Communication Interface
Module. The CIM module enables data transmission
between the pump and an external system, for
example a BMS or SCADA system.
The CIM module communicates via fieldbus protocols.
The following CIM modules are available:
For further information about data communication via
CIM modules, see the CIM documentation available in
WebCAPS.
Location of CIM module
The CIM module is fitted behind the front cover. See
fig. 58.
For installation, see separate installation and operating
instructions.
Fig. 58 Location of CIM module
TM05 2874 0412
Module Fieldbus protocol Product number
CIM 050 GENIbus 96824631
CIM 100 LonWorks 96824797
CIM 150 Profibus DP 96824793
CIM 200 Modbus RTU 96824796
CIM 300 BACnet MS/TP 96893770
http://GRUNDFOS.COM/MANUAL-MAGNA3
TM05 2914 1112