Brochure

Guide to performance curves
MAGNA1
9
17
Curve conditions
Performance curves
The guidelines below apply to the performance curves.
Test liquid: airless water.
The curves apply to a density of ρ = 61.38 lb/ft
3
(983.2 kg/m
3
) and a liquid temperature of +140 °F
(+60 °C).
All curves show average values and should not be
used as guarantee curves. If a specific minimum
performance is required, individual measurements
must be made.
The curves apply to a kinematic viscosity of
= 0.474 mm
2
/s (0.474 cSt).
Reference supply voltage: 1 x 230 V, 50 Hz.
EEI obtained according to EN 16297.
Symbols used on the following pages
Fig. 15 Energy efficiency index (EEI)
The MAGNA1 is energy-optimized and complies with
the EuP Directive (Commission Regulation (EC) No
641/2009) which will be effective as from 1 January
2013.
For MAGNA1 pumps, the average energy efficiency
index (EEI) is 0.18 with values down to 0.17,
categorized as best in class.
Fig. 16 Old energy label
From 1 January 2013, the old A to G energy label will
be replaced by the new energy efficiency index (EEI).
Only the best of today’s A-labelled circulator pumps
will meet the new requirements.
Figure 17 shows the energy consumption index for a
typical circulator pump compared to the various EEI
limits.
Fig. 17 Energy consumption index
QR code on pump nameplate
Fig. 18 QR code on pump nameplate
With the Grundfos GO Remote or a smartphone, it is
possible to get the following information about the
MAGNA1:
product photo
pump performance curves
dimensional sketches
wiring diagram
quotation text
technical data
PDF files, such as data booklet and installation and
operating instructions.
Note: The GO Remote or Smart phone may be used to
read the QR Code to download product information
from GO CAPS. The MAGNA1 does not communicate
with the GO.
TM05 2714 0412
TM05 3936 1712
BEST
in class
BEST
in class
TM05 3935 1712
TM05 3826 1712
Index
10
0
20
30
40
50
80
60
90
70
100
Typical
circulator
pump
EuP
2013
EuP
2015
EuP
benchmark
level
MAGNA3
labelled
labelled
EEI = 0.27
EEI = 0.23
EEI = 0.20
EEI = 0.17
Typical
circulator
pump
EuP
2013
EuP
2015
EuP
benchmark
level
MAGNA1