Install Instructions

29
English (US)
17. Grundfos Eye
The operating condition of the pump is indicated by the Grundfos
Eye on the control panel. See fig. 50, pos. A.
Fig. 50 Grundfos Eye
TM05 5993 4312
A
Grundfos Eye Indication Description
No lights on.
Power off.
Motor not running.
Two opposite green indicator lights rotating in
the direction of rotation of the motor when
seen from the non-drive end.
Power on.
Motor running.
Two opposite green indicator lights
permanently on.
Power on.
Motor not running.
One yellow indicator light rotating in the
direction of rotation of the motor when seen
from the non-drive end.
Warning.
Motor running.
One yellow indicator light permanently on.
Warning.
Motor stopped.
Two opposite red indicator lights flashing
simultaneously.
Alarm.
Motor stopped.
The green indicator light in the middle flashes
quickly four times.
Remote control with the Grundfos GO Remote via
radio.
The motor is trying to communicate with the
Grundfos GO Remote. The motor in question is
highlighted in the Grundfos GO Remote display to
inform the user of the location of the motor.
The green indicator light in the middle flashes
continuously.
When the motor in question is selected in the
Grundfos GO Remote menu, the green indicator
light in the middle will flash continuously. Press
on the motor control panel to allow remote control
and data exchange via the Grundfos GO Remote.
The green indicator light in the middle is
permanently on.
Remote control with the Grundfos GO Remote via
radio.
The motor is communicating with the Grundfos GO
Remote via radio connection.
The green indicator light in the middle flashes
quickly while the Grundfos Go Remote is
exchanging data with the motor. It will take a
few seconds.
Remote control with the Grundfos GO Remote via
infrared light.
The motor is receiving data from the Grundfos GO
Remote via infrared communication.