LCD TV 22 VLE 2102 C EN
Contents------------------------------------------------------------------------------------------------------------------------------------4 Setup AND SAFETY 6 6 7 7 General information Special features of your television set Receiving digital channels Important notes on environmental protection 8 8 9 9 Connection and preparation Connecting the antenna and power cord Inserting batteries into the remote control Adjusting the inclination of the screen 10 Overview 10 Connections on the t
Contents------------------------------------------------------------------------------------------------------------------------------------41 OPERATION AS A PC MONITOR 41 Connecting a PC 41 Selecting presets for the PC 41 Settings for PC mode 42 Operation with a Common Interface 42 What is a Common Interface? 42 Inserting the CA module 42 Access control for CI module and smart card 43 Special settings 44 Searching for digital terrestrial TV channels automatically 45 Searching for digital terre
Setup AND SAFETY-----------------------------------------------------------------------------------------------------Please note the following instructions when setting up the television set: This television is designed to receive and display video and audio signals. All other uses are expressly prohibited. 7 The ideal viewing distance is five times the diagonal screen size. 7 Make sure the power cord or the power supply unit (if provided) are not damaged.
Setup AND SAFETY-----------------------------------------------------------------------------------------------------Do not connect any other equipment while the device is switched on. Also switch off other equipment before connecting it. 7 Do not plug in the power cord of the device until you have connected the external equipment and the antenna. 7 Make sure the mains plug is freely accessible.
General information--------------------------------------------------------------------------------Special features of your television set You can receive and watch digital TV channels using your television set (via DVB-T and DVB-C) – including High Definition programmes (HD). However, the reception of digital TV channels in HD is currently limited to a few countries in Europe.
General information--------------------------------------------------------------------------------Receiving digital channels You require a digital roof antenna or indoor antenna (passive or active indoor antenna with its own power supply) to receive digital television channels (DVB-T). 7 If you wish to receive digital television channels via your cable system (DVB-C), the antenna cable for your cable operator must be connected to the television set.
Connection and preparation----------------------------------------------Connecting the antenna and power cord 2 3 1a To receive terrestrial digital broadcasters (DVB-T) connect the cable for the rooftop or indoor antenna (passive or active indoor antenna with its own power supply) to the antenna socket »ANT IN« on the television set; or 1b To receive digital cable channels (DVB-C) connect the cable for the rooftop antenna to the antenna socket »ANT IN« on the television set; or 1c To receive a
Connection and preparation----------------------------------------------Inserting batteries into the remote control Environmental note 7 This symbol on rechargeable batteries/batteries or on the packaging indicates that the rechargeable battery/battery may not be disposed of with regular household rubbish. For certain rechargeable batteries/batteries, this symbol may be supplemented by a chemical symbol.
Overview------------------------------------------------------------------------------------------------------------------------------------Connections on the television set DC IN C External source input. D (12 V / 4.6 A; 2.5 mm jack). Y/CVBS Video socket for camcorder. AC IN Socket for the mains cable. Audio AV1 / S-VHS CART socket (FBAS signal, S RGB signal); Video socket for S-Video camcorder. Socket for audio input for a PC. PC-IN VGA socket, video input for PC.
Overview------------------------------------------------------------------------------------------------------------------------------------USB HDMI1 SB socket for external U data media without a power supply of their own. DMI socket, H audio/video input. CI Common Interface Slot. Controls on the television set O I Power switch, switches the television to off. 8 Switches the television on and back into standby mode.
Overview------------------------------------------------------------------------------------------------------------------------------------The remote control – Main functions Sound on/off (mute). witch the television on S from standby mode. Select stations directly. Opens the selection menu to change picture formats. Then select with »B« or »A« and press »OK« to confirm. Adjust the volume. Opens the menu.
Overview------------------------------------------------------------------------------------------------------------------------------------The remote control – All functions 16:9 ● (yellow) 7 F reeze-frame; Selects a page in teletext mode; Activates various functions. Ends playback in the file browser. ● (blue) W elects a page in teletext S mode; Activates various functions. Starts the forward picture search in the file browser; Opens the recorded list.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Initial set-up and tuning television channels Selecting language, country and operating mode The television set is equipped with automatic channel search, which searches for terrestrial channels (DVB-T), cable channels (DVB-C) and analogue channels. 1 Switch on the television set from standby with »POWER«, »1…0 « or »P+« or »P-«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Tuning terrestrial television channels (DVB-T) Tuning television channels from the cable provider (DVB-C) 1 In the »Source Setup« menu, in the »Connection Type« line, select the option »Air« with »B« or »A«. 1 In the »Source Setup« menu, in the »Connection Type« line, select the option »Cable« with »B« or »A«. 2 Select the line »Scan Type« with »C« or »D«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Changing the program table for the digital channels Channels which are found using the scan are saved in the »PROGRAM TABLE«. You can delete channels which are not required from the programe table, and lock individual channels (Parental control).
Settings-----------------------------------------------------------------------------------------------------------------------------------------Creating lists of favourites (Digital) You can save your favourite channels in up to four favourites lists (FAV 1 to FAV 4). Notes: Favourites lists must be created separately for all input sources (cable and air). 7 You can select the favourites list by pressing »0 FAV«. 7 1 In the »PROGRAM TABLE« menu, switch over to the list view with »●« (yellow).
Settings-----------------------------------------------------------------------------------------------------------------------------------------Picture settings 1 Open the menu with »M«. 2 Select the menu item »PICTURE SETTINGS« with »C« or »D« and press »OK« to confirm. – The »PICTURE SETTINGS« menu appears. PICTURE SETTINGS Picture Mode User Brightness 50 Contrast 100 Sharpness 75 Colour 20.09.2010 15:46 65 Colour Temperature Medium Enhanced picture settings DNR Off Mpeg NR.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Sound settings Automatic volume 1 Open the menu with »M«. Television stations broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels. 2 Select the menu item »SOUND SETTINGS« with »C« or »D« and press »OK« to confirm. – The »SOUND SETTINGS« menu appears. 20.09.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Soundeffects Equalizer This menu offers three preset sound effects (Music, Natural and Speech) and one setting to be created by you (User). Equalizer offers a sound setting that you can create. 1 Select the line »Sound Preset« with »C« or »D«. 2 Select the sound effect »Music«, »Natural« or »Speech« by pressing »B« or »A«.
Television - OPERATION-------------------------------------------------------------------------------Basic functions Switching on and off 1 Press »POWER«, »1…0 « or »P+« or »P-« to switch on the television from standby mode. 2 Press »POWER« to switch the television to standby. Selecting channels 1 Press »1…0 « to select presets directly. 2 Select channels step by step with »P+« or »P-«. Switching sound on/off 1 Press »MUTE« to mute the sound or switch it on again.
Television - OPERATION-------------------------------------------------------------------------------Zoom function Electronic TV guide This function allows you to enlarge the picture as required. The electronic TV guide provides an overview of all programmes that will be broadcast in the next week (for digital channels only). 1 Press »N« repeatedly to enlarge the display in three steps.
Television - OPERATION-------------------------------------------------------------------------------Changing the picture format »Panorama« format The television automatically switches to the 16:9 format if this format is detected via the SCART socket. This setting is suitable for films in an especially wide format. 1 Select the picture format with »16:9«. – The picture format (for example »16:9«) is displayed.
USB OPERATION---------------------------------------------------------------------------------------------------------------File formats Image data Your television can work with the following file formats using the USB sockets: Your television can display pictures in the formats JPEG, PNG and BMP. JPEG stands for Joint Picture Experts Group. It denotes a process for compressing picture files. PNG and BMP are process used to save image data with no, or very little, losses.
USB OPERATION---------------------------------------------------------------------------------------------------------------Connecting external data media Before connecting the data medium, switch the television to standby using »POWER«. Connect the device and then switch the television on again. Before removing the external data medium, the television set must be switched to standby, so that no data loss occurs.
USB OPERATION---------------------------------------------------------------------------------------------------------------The file browser The file browser displays video, audio and picture files stored on external data media. If an external data medium contains files in different formats, you can, when necessary, filter out the formats not required.
USB OPERATION---------------------------------------------------------------------------------------------------------------DivX® VOD Basic playback functions You must have your device registered in order to play the protected video that you will buy from DivX®. 1 Select the data medium by pressing »I«, use »C«, »D«, »B« or »A« to select the option »USB« and press »OK« to confirm. – The file browser appears. 1 Select »DivX® VOD« with »C« or »D« and confirm with »OK«. – Registration Code appears.
USB OPERATION---------------------------------------------------------------------------------------------------------------Notes: 7 Use »D« to select »Up Folder«, when you would like to return to the last folder. Use »Root« (and then press »OK«) to return to the main folder. It is possible that files which are actually supported do not function correctly in USB mode. This is because certain files are not recorded with standardised compression processes, although they feature the “right” file ending.
USB OPERATION---------------------------------------------------------------------------------------------------------------Selecting a track or picture in steps (SKIP) 1 During playback, select the next track/ picture with »U«. 2 During playback, select the previous track/ picture with »V«. – Playback begins with the track or picture you selected. Rotating pictures (picture files only) You can rotate pictures by 90°. 1 During playback, press »B« or »A« to rotate the pictures by 90°.
Teletext OPERATION----------------------------------------------------------------------------------------------TOP text or FLOF text mode Enlarging the character height 1 Press »TXT« to switch on teletext. If you have difficulty reading the text on the screen, you can increase the character height. 2 Select teletext pages directly with »1...0 « or step by step with »C« and »D«. Return to teletext page 100 with »İ«.
Convenience functions------------------------------------------------------------------------Opening the SETTINGS menu Changing the audio language 1 Open the menu with »M«. (only for digital television channels) 2 Select the »SETTINGS« menu with »C« or »D« and press »OK« to confirm. – The »SETTINGS« menu appears. You can define a primary and a secondary audio language. 20.09.
Convenience functions------------------------------------------------------------------------Setting the date and time Timer settings Automatic setting Entering the switch-off time (sleep timer) In the »Sleep Timer« menu you can enter a time Your television set detects the difference in time to Greenwich Mean Time (GMT) automatically, as long as the channel selected transmits a time signal. 1 Select the line »Time Adjustment« with »C«, then select the option »Manual« with »B« or »A«.
Convenience functions------------------------------------------------------------------------6 Select the line »Volume« with »C« or »D« and use »B« or »A« to set the volume. 7 Select the line »Set Hour« with »C« or »D« and enter the time with »1…0«. 8 Save the data with »●« (green). 9 Press »M« to end the setting. Switch-off timer In the »Auto Off« menu, you can enter a time Parental control settings Authorising programmes There are films which may be wholly or partially unsuitable for children.
Convenience functions------------------------------------------------------------------------Changing the PIN code Updating software You can also enter a personal PIN code instead of the default code »1234«. Please take note of your own PIN code. (for digital channels only) 1 Select »Set PIN« with »C« or »D« and press »OK« to confirm. 2 Enter the current PIN code 1234 with »1...0«. 1 In the »SETTINGS« menu, select the line »Check For Updates updates« with »C« or »D« and press »OK« to confirm.
OPERATION USING EXTERNAL DEVICES-----------------------------DIGI LINK Your television is equipped with the DIGI LINK function. This function uses the CEC (Consumer Electronics Control) protocol. CEC allows external devices which are connected to the »HDMI« sockets by an HDMI cable (e.g. DVD player) to be operated with a remote control. Prerequisite is that the devices connected support CEC. Read the operating manual for the external device to find out how to activate the corresponding function.
OPERATION USING EXTERNAL DEVICES-----------------------------Device operation You can decide whether external devices should react to your television's remote control. 1 Press »I«, use »C«, »D«, »B« or »A« to select the preset »HDMI1« or »HDMI2« and press »OK« to confirm. 2 Open the menu with »M«. 3 Select the menu item »SOURCE SETUP« with »C« or »D« and press »OK« to confirm. – The »SOURCE SETUP« menu appears. SOURCE SETUP 20.09.2010 15:46 Notes: »RC Passthrough« can be used for all devices.
OPERATION USING EXTERNAL DEVICES-----------------------------High definition HD ready Connect the corresponding input sources (e.g. HDTV receiver or HDDVD player) to the »HDMI« sockets (for digital HDTV sources). This ensures that you can view digital HDTV programmes, even if they are copy-protected (HDCP High Bandwidth Digital Content Protection), without encountering problems.
OPERATION USING EXTERNAL DEVICES-----------------------------Connecting external devices ... with digital audio/video signals Suitable devices: Digital satellite receivers, Playstation, BluRay player, DVD player/ recorder, set-top box, notebook, PCs. 7 Video signal: Digital video; resolution: standard 576p; HDTV 720p, 1080i. 7 Audio signal: digital audio (stereo, multi-channel compression, uncompressed). 7 Presets »HDMI 1« or »HDMI 2«.
OPERATION USING EXTERNAL DEVICES-----------------------------... with an analogue TV signal Suitable devices: Digital satellite receiver, DVD player/recorder, set-top box, camera recorder. 7 Video signal: FBAS. 7 Audio signal: stereo, analogue. 7 »AV2« preset. 7 1 Connect the »Y/CVBS« socket on the television to the corresponding socket of the external device with an RCA cable (video signal).
OPERATION USING EXTERNAL DEVICES-----------------------------Hi-fi system/AV receiver Notes: Playing the audio signal via the HiFi system 1 Connect the »U« sockets on the television to 7 the corresponding socket of the AV receiver with an cable (digital audio signal). Note: If this function is not activated, the audio signal is transmitted to the HiFi system/AV receiver (connected to »U« 3.5 mm ø jack plug) into the headphone socket on the left side of the television.
OPERATION AS A PC MONITOR---------------------------------------------------------- Connecting a PC 1 Connect the »PC-IN« socket on the television to the corresponding socket on the PC using a VGA cable (video signal). 2 Connect the »Audio« socket on the television to the corresponding socket on the PC using a suitable cable (audio signal). Source Extended settings Auto Ajust Mode Size 2 Select the »SOURCE SETUP« menu item with »C« or »D« and press »OK« to confirm.
Operation with a Common Interface------------------ What is a Common Interface? Common Interface (CI) is an interface for DVB receivers. 7 Encrypted channels can only be viewed with a CA module suitable for the encryption system and in conjunction with the corresponding smart card. 7 The television set is equipped with a Common Interface slot into which CI modules from various providers can be inserted.
Special settings---------------------------------------------------------------------------------------------------------Searching for television channels from the cable provider automatically 1 Open the menu with »M«. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »OK« to confirm. – The »SOURCE SETUP« menu appears. 3 Select the line »Source« with »C« or »D« and press »OK« to confirm. Select the option »Cable« with »B«, »A«, »C« or »D« and press »OK« to confirm.
Special settings---------------------------------------------------------------------------------------------------------Searching for television channels from the cable provider manually Searching for digital terrestrial TV channels automatically 1 Open the menu with »M«. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »OK« to confirm. – The »SOURCE SETUP« menu appears. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »OK« to confirm. – The »SOURCE SETUP« menu appears.
Special settings---------------------------------------------------------------------------------------------------------6 Select the line »Scan Typ« with »C« or »D« and set the option »DTV« with »B« or »A«. 7 Start the scan with »●« (red). – All channel and favourites lists will be deleted and compiled anew. Note: After starting the scan, a security query will appear. Press »●« (green) to confirm the option »Yes«. 7 – The »Reults« menu appears, and the scan for TV channels begins.
Special settings---------------------------------------------------------------------------------------------------------Tuning analogue television channels This setting is only necessary if you cannot receive any digital channels and you have not carried out an analogue search during initial setup. The television channels can be set directly or using the scan. Setting all analogue television channels Analogue channels are displayed in the channel list after the digital channels.
Special settings---------------------------------------------------------------------------------------------------------Tuning the television channels by entering the channel numbers 1 Open the menu with »M«. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »OK« to confirm. – The »SOURCE SETUP« menu appears. 3 Select the line » Analogue Manual Tuning« with »C« or »D« and press »OK« to confirm. – The menu appears.
Special settings---------------------------------------------------------------------------------------------------------Entering channel names (8 digit maximum) 1 In the »PROGRAME TABLE« menu, select the television channel with »C«, »D«, »B« or »A« and press »●« (red) to confirm. 2 Open the input keyboard with »●« (green). Note: 7 If necessary, delete the current channel name. To do this, select the » « button with »B« or »A« and delete repeatedly using »OK«.
INFORMATION---------------------------------------------------------------------------------------------------------------------Displaying signal information (for digital channels only) 1 Open the menu with »M«. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »OK« to confirm. 3 Select the line »Signal Information« with »C« or »D« and press »OK« to confirm. – Information on the channel, network, modulation, symbol rate, quality and signal strength is displayed.
INFORMATION---------------------------------------------------------------------------------------------------------------------GRUNDIG 22 VLE 2102 C Technical data Operating voltage: 220-240 V ~ 50-60 Hz or DC 12 V / 4,6 A max. standard adaptor Power consumption: On mode 32 W Standby <0,50 W Energy Efficiency class: B Maximum power consumption On mode 55 W Annual power consumption 47 kWh Audio output: 2 x 6 W music power output 2 x 3 W Sine wave power Analogue reception ranges: C02 ...
INFORMATION---------------------------------------------------------------------------------------------------------------------Service information for retailers Only operate the television with the power supply/power cord provided. The product complies with the following EU directives: 2006/95/EC directive on electrical equipment for use within certain voltage limits. 2004/108/EC directive on electromagnetic compatibility. 2009/125/EC directive on ecodesign requirements for energy-related products.
INFORMATION---------------------------------------------------------------------------------------------------------------------Troubleshooting If the information provided below does not help, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers.
INFORMATION---------------------------------------------------------------------------------------------------------------------Additional Information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply. The range of multi-system receivers is built to work in most European countries. However, the mains plug and socket system for the UK differs from many European countries.
