Operation Manual


ENGLISH



Ifyouknowtheparametersofanewtelevision
channel, you can also search for it manually.
Current transponder data can be found in the
teletext, in satellite TV magazines or on the
Internet.
 Openthemenuwith»«.
 Selecttheline»SOURCESETUP«with
» C «
or
» D «andpress»«toconfirm.
 –The»SOURCESETUP«menuappears.
 Select»DigitalManualTuning«with
» C «or
» D «andpress»«toconfirm.
 –Themenuappears.
 Select the line required for the parameters
with
» C «or» D «.
 –»Frequency (MHz)«: Enter the five-digit
frequencywith»«.
 –»Symbol Rate (kS/s)«: Enter the five-digit
symbolratewith»«.
 –»Polarization«:Use
»
B
«or»
A
«tosetthe
polarisationto»Horizontal«or»Vertical«.
 –»NetworkSearch«:use
»
B
«or»
A
«tose-
lecttheoption»On«or»Off«.
 –»ScanMode«:Use
»
B
«or»
A
«toselect
whetheryouwanttosearchforunencrypt-
ed(Unencrypted)channelsonly,encrypt-
ed(Encrypted)channelsonly,orforboth
(Unencrypted+Encrypted).
 –»ServiceType«:Use
»
B
«or»
A
«toselect
whetheryouwanttosearchfortelevision
channels only (TV), radio stations only
(Radio),orboth(Radio+TV).
 Startthescanwith»●«(red).
 –The»Results«menuappears,andthescan
forTVchannelsbegins.

7
Youcanabortthesearchbypressing»«.
 Press»
«toendthesetting.



 Openthemenuwith»«.
 Selecttheline»SOURCESETUP«with
» C «
or
» D «andpress»«toconfirm.
 –The»SOURCESETUP«menuappears.
 Select»AntennaSettings«with
» C «or» D «
andpress»«toconfirm.
 –The »ANTENNA SETTINGS« menu ap-
pears.
 Select the line required for the parameters
with
» C «or» D «.
 –»Satellite«: »Press «, select a satellite
with
»
B
«, »
A
«, » C « or » D « and press
»«toconfirm.
 –»Transponder«:»Press«,selectatran-
sponder with
»
B
«, »
A
«, » C « or » D «
andpress»●«toconfirm.Use»●«(red)
toaddatransponder,use»●«(green)to
delete it, or use »●« (yellow) to change
transponderdata.
 –»LNBPower«:SettheLNB powersupply
(dependingonthetypeofLNB)to»Off«
»13/18 V« or »14/19 V« with
»
B
« or
»
A
«.
 –»LNB Type«: Select a type of LNB with
»
B
«or»
A
«.Use»●«(green)tosavethe
setting,oruse»●«(red)toabort.
 –»DISEqC mode« and »LNB selection«:
depending on the type of antenna used,
use
»
B
«or »
A
«select the option»Off«,
»DiSEqC1.0«or»DiSEqC1.1«.
  »Off«:forasatellitesystemwithonly
oneantenna.
  »DiSEqC1.0«:allowsuptofoursatel-
litestobereceivedsimultaneously.
  Under »LNB selection«, use
»
B
«
or
»
A
« to select the option »1/4«,
»2/4«,»3/4«or»4/4«.
  »DiSEqC1.1«: allowsup to 16 satel-
litestobereceivedsimultaneously.
  Under »LNB selection«, use
»
B
« or
»
A
« to select the option »1/16« to
»16/16«.
 Press»
«toendthesetting.