LCD TV with LED Backlight 22 VLE 8320 BF EN
Contents------------------------------------------------------------------------------------------------------------------------------------4 Setup AND SAFETY 6 6 6 7 7 General information Special features of your TV Receiving digital channels Important notes on environmental protection Notes on still images 8 8 9 Connection and preparation Connecting the antenna and power cord Inserting batteries into the remote control 10 Overview 10 Connections on the television set 11 Controls on the television s
Contents------------------------------------------------------------------------------------------------------------------------------------50 OPERATION AS A PC MONITOR 50 Connecting a PC 50 Selecting presets for the PC 50 Settings for PC mode 51 Operation with a Common Interface 51 What is a Common Interface? 51 Inserting the CA module 51 Access control for CI module and smart card 52 53 55 56 Special settings Searching for digital terrestrial TV channels automatically Searching for digital terrestrial
Setup AND SAFETY-----------------------------------------------------------------------------------------------------Please note the following instructions when setting up the television set: This television is designed to receive and display video and audio signals. All other uses are expressly prohibited. 7 The ideal viewing distance is five times the diagonal screen size. 7 Make sure the power cord or the power supply unit (if provided) are not damaged.
Setup AND SAFETY-----------------------------------------------------------------------------------------------------Do not connect any other equipment while the device is switched on. Also switch off other equipment before connecting it. 7 Do not plug in the power cord of the device until you have connected the external equipment and the antenna. 7 Make sure the mains plug is freely accessible.
General information--------------------------------------------------------------------------------Special features of your TV You can receive and watch digital TV channels using your television set (via DVB-T and DVBC) – including High Definition programmes (HD). However, the reception of digital TV channels in HD is currently limited to a few countries in Europe.
General information--------------------------------------------------------------------------------Important notes on environmental protection The following information will help you to save resources – and money as well. 7 If you are not using your television set for several days, you should pull out the mains plug for environmental and safety reasons. This way the television does not consume any electricity.
Connection and preparation----------------------------------------------Connecting the antenna and power cord 2 1 1a To receive terrestrial digital broadcasters (DVB-T) connect the cable for the rooftop or indoor antenna (passive or active indoor antenna with its own power supply) to the antenna socket »ANT IN« on the television set; or 1b To receive digital cable channels (DVB-C) connect the cable for the rooftop antenna to the antenna socket »ANT IN« on the television set; or 1c To receive analogue TV
Connection and preparation----------------------------------------------Inserting batteries into the remote control Environmental note 7 This symbol on rechargeable batteries/batteries or on the packaging indicates that the rechargeable battery/battery may not be disposed of with regular household rubbish. For certain rechargeable batteries/batteries, this symbol may be supplemented by a chemical symbol.
ovErvIEw-----------------------------------------------------------------------------------------------------------------------------------Connectionsonthetelevisionset Av1/S-vHS CompoNENt prpbY/Av2 Lr Y/Av2 10 ENGLISH SCART socket (CVBS signal, RGB signal); Video and sound socket for S-Video camcorder. Sockets for video input (YUV signal). Sockets for audio input (YUV signal); Audio socket for camcorder. ideo socket for V camcorder Audio Socket for audio input for a PC.
Overview------------------------------------------------------------------------------------------------------------------------------------USB HDMI1 SB socket for external U data media without a power supply of their own and PVR function. DMI socket, H audio/video input. CI Common Interface Slot. Controls on the television set 8 Switches the television on and back into standby mode. + djusts the volume; A Selects channels in steps; Selects menu functions.
Overview------------------------------------------------------------------------------------------------------------------------------------The remote control – Main functions Sound on/off (mute). witch the television on S from standby mode. Select stations directly. Opens the selection menu to change picture formats. Then select with »B« or »A« and press »OK« to confirm. Adjust the volume. Opens the menu.
Overview------------------------------------------------------------------------------------------------------------------------------------The remote control – All functions 16:9 ● (yellow) 7 F reeze-frame; Selects a page in teletext mode; Activates various functions. Ends playback in the file browser; Ends recording or playback in the PVR mode; Time shift during live signal (in digital TV operation, only via external data media).
Settings-----------------------------------------------------------------------------------------------------------------------------------------Initial set-up and tuning television channels Selecting language, country and operating mode The television set is equipped with automatic channel search, which searches for terrestrial channels (DVB-T), cable channels (DVB-C) and analogue channels. 1 Switch on the television set from standby with »POWER«, »1…0 « or »P+« or »P-«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Tuning terrestrial television channels (DVB-T) Tuning television channels from the cable provider (DVB-C) 1 In the »Source Setup« menu, in the »Connection Type« line, select the option »Air« with »B« or »A«. 1 In the »Source Setup« menu, in the »Connection Type« line, select the option »Cable« with »B« or »A«.
SEttINGS----------------------------------------------------------------------------------------------------------------------------------------Changingtheprogramtablefor thedigitalchannels Channels which are found using the scan are saved in the »PROGRAM TABLE«. You can delete channels which are not required from the programe table, and lock individual channels (Parental control).
Settings-----------------------------------------------------------------------------------------------------------------------------------------Deleting channels in the program table 2 sort digital television channels from the cable provider with »●« (blue). 1 In the »PROGRAM TABLE« menu, select the Edit mode by pressing »●« (red). 3 Quit the program table with »M«. 2 Select the television channel to be deleted with »C«, »D«, »B« or »A« and press »●« (yellow) to delete.
Settings-----------------------------------------------------------------------------------------------------------------------------------------3 “Push” the channel into the favourites lists 1 to 4 with »B« or »A« and press »OK« to confirm. – The position in the favourites list is marked with »✔«. – You can enter the same channel in more than one favourite list. – Each favourite list can store up to 250 channels. Notes: Channels can also be deleted from the favourites lists.
SEttINGS----------------------------------------------------------------------------------------------------------------------------------------picturesettings 1 Open the menu with »m«. 2 Select the menu item »PICTURE SETTINGS« with »C« or »D« and press »oK« to confirm. – The »PICTURE SETTINGS« menu appears. PICTURE SETTINGS Picture Mode User Brightness 50 Contrast 100 Sharpness 75 Colour 20.09.2010 15:46 65 Colour Temperature Medium Enhanced picture settings DNR Off Mpeg NR.
SEttINGS----------------------------------------------------------------------------------------------------------------------------------------Soundsettings Automaticvolume 1 Open the menu with »m«. Television stations broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels. 2 Select the menu item »SOUND SETTINGS« with »C« or »D« and press »oK« to confirm. – The »SOUND SETTINGS« menu appears. 20.09.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Soundeffects Equalizer This menu offers three preset sound effects (Music, Natural and Speech) and one setting to be created by you (User). Equalizer offers a sound setting that you can create. 1 Select the line »Sound Preset« with »C« or »D«. 2 Select the sound effect »Music«, »Natural« or »Speech« by pressing »B« or »A«.
Television - OPERATION-------------------------------------------------------------------------------Basic functions Switching on and off 1 Press »POWER«, »1…0 « or »P+« or »P-« to switch on the television from standby mode. 2 Press »POWER« to switch the television to standby. Selecting channels 1 Press »1…0 « to select presets directly. 2 Select channels step by step with »P+« or »P-«.
Television - OPERATION-------------------------------------------------------------------------------Zoom function Electronic TV guide This function allows you to enlarge the picture as required. The electronic TV guide provides an overview of all programmes that will be broadcast in the next week (for digital channels only). 1 Press »N« repeatedly to enlarge the display in three steps.
Television - OPERATION-------------------------------------------------------------------------------Changing the picture format »Panorama« format The television automatically switches to the 16:9 format if this format is detected via the SCART socket. This setting is suitable for films in an especially wide format. 1 Select the picture format with »16:9«. – The picture format (for example »16:9«) is displayed.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Information on recording and playing television programmes Possible limitations when using an external data medium ■ Recording Depending on the broadcaster, you may experience various restrictions on some of the functions from some television channels. and playback of television programmes is only possible with digital television channels (DVB-T and DVB-C).
uSBrECorDING-------------------------------------------------------------------------------------------------------------Connectingexternaldatamedia Notes: 7 Before connecting the data medium, switch the television to standby with »powEr«. Connect the device and then switch the television on again. 7 Before removing the external data medium, the television must be switched to standby, so that no data loss occurs.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Switching on automatic preview If the automatic preview is switched on, a preview of the selected file appears in the file browser. 1 Select the line »Auto Preview« with »C« or »D«. 2 Switch on the function with »B« or »A« (»On«). 3 Press »M« to end the setting. Safely remove disk 1 Select the line »Safely Remove Disk« with »C« or »D« and press »OK« to confirm.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Recording programmes You can record programmes. The data for these programmes is recorded on an external data medium and this archive is administered via the television. 7 Note for UPC customers only: When a program is recorded, it can happen that a part of the previous or next program is included in the recording schedule due to possible electronic TV guide inaccuracies.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Presetting programmes to be recorded ... using the electronic TV guide You can use data from the electronic TV guide for recording. ... by manual data entry You can preset up to 25 programmes for timer recording. 1 Press »EPG« to display channel information. – The electronic TV guide appears. 25 programmes can be preset for the timer recording or as a reminder.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Editing recording data in the timer menu You can edit the data for programmed timer recordings. 1 Select the timer menu by pressing »EPG«, »●« (yellow) and »●« (blue) in succession. – The »SCHEDULED EVENTS« menu appears. 2 Select the title of the programme to be changed with »C« or »D« and activate the timer position with »●« (green). – The input menu is displayed.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Playback during a recording Deleting programmes in the recording list During a recording, you can either watch the programme you are currently recording or watch a different one that you have already recorded. You can delete programmes from the recording list. 1 Select the channel to be recorded with »1…0 « or »P+«, »P–« and press »O« to start the recording.
USB OPERATION---------------------------------------------------------------------------------------------------------------File formats Image data Your television can work with the following file formats using the USB sockets: Your television can display pictures in the formats JPEG, PNG and BMP. JPEG stands for Joint Picture Experts Group. It denotes a process for compressing picture files. PNG and BMP are process used to save image data with no, or very little, losses.
uSBopErAtIoN--------------------------------------------------------------------------------------------------------------Connectingexternal datamedia Before connecting the data medium, switch the television to standby using »powEr«. Connect the device and then switch the television on again. Before removing the external data medium, the television set must be switched to standby, so that no data loss occurs.
USB OPERATION---------------------------------------------------------------------------------------------------------------The file browser The file browser displays video, audio and picture files stored on external data media. If an external data medium contains files in different formats, you can, when necessary, filter out the formats not required. Main menu of the file browser 4 1 Note: 7 Additional functions are explained in the following sections.
USB OPERATION---------------------------------------------------------------------------------------------------------------DivX® VOD Basic playback functions You must have your device registered in order to play the protected video that you will buy from DivX®. 1 Select the data medium by pressing »I«, use »C«, »D«, »B« or »A« to select the option »USB« and press »OK« to confirm. – The file browser appears. 1 Select »DivX® VOD« with »C« or »D« and confirm with »OK«. – Registration Code appears.
USB OPERATION---------------------------------------------------------------------------------------------------------------Notes: 7 Use »D« to select »Up Folder«, when you would like to return to the last folder. Use »Root« (and then press »OK«) to return to the main folder. It is possible that files which are actually supported do not function correctly in USB mode. This is because certain files are not recorded with standardised compression processes, although they feature the “right” file ending.
USB OPERATION---------------------------------------------------------------------------------------------------------------Selecting a track or picture in steps (SKIP) 1 During playback, select the next track/ picture with »U«. 2 During playback, select the previous track/ picture with »V«. – Playback begins with the track or picture you selected. Rotating pictures (picture files only) You can rotate pictures by 90°. 1 During playback, press »B« or »A« to rotate the pictures by 90°.
Teletext OPERATION----------------------------------------------------------------------------------------------TOP text or FLOF text mode Enlarging the character height 1 Press »TXT« to switch on teletext. If you have difficulty reading the text on the screen, you can increase the character height. 2 Select teletext pages directly with »1...0 « or step by step with »C« and »D«. Return to teletext page 100 with »İ«.
CoNvENIENCEFuNCtIoNS-----------------------------------------------------------------------openingtheSEttINGSmenu Changingtheaudiolanguage 1 Open the menu with »m«. (only for digital television channels) 2 Select the »SETTINGS« menu with »C« or »D« and press »oK« to confirm. – The »SETTINGS« menu appears. You can define a primary and a secondary audio language. 20.09.
Convenience functions------------------------------------------------------------------------Setting the date and time Timer settings Automatic setting Entering the switch-off time (sleep timer) In the »Sleep Timer« menu you can enter a time Your television set detects the difference in time to Greenwich Mean Time (GMT) automatically, as long as the channel selected transmits a time signal. 1 Select the line »Time Adjustment« with »C«, then select the option »Manual« with »B« or »A«.
Convenience functions------------------------------------------------------------------------6 Select the line »Volume« with »C« or »D« and use »B« or »A« to set the volume. 7 Select the line »Set Hour« with »C« or »D« and enter the time with »1…0«. 8 Save the data with »●« (green). 9 Press »M« to end the setting. Switch-off timer In the »Auto Off« menu, you can enter a time Parental control settings Authorising programmes There are films which may be wholly or partially unsuitable for children.
Convenience functions------------------------------------------------------------------------Locking keys (Parental lock) Locking television channels When the key lock is activated, the buttons on the television set do not function. You can lock individual television channels, for example channels unsuitable for children, using a personal PIN code. 1 Select the line »Keypad Lock« with »C« or »D«. 2 Enter the PIN code »1234« with »1...0«. 3 Activate (On) or deactivate (Off) the key lock with »B« or »A«.
Convenience functions------------------------------------------------------------------------Updating software (for digital channels only) 1 In the »SETTINGS« menu, select the line »Check For Updates updates« with »C« or »D« and press »OK« to confirm. – A search for new software will be made and – if available – it will be installed. Note: 7 If a search for software updates should be made automatically, select the line »Automatic OAD« with »C« or »D« and use »B« or »A« to select the option »On«.
OPERATION USING EXTERNAL DEVICES-----------------------------DIGI LINK Your television is equipped with the DIGI LINK function. This function uses the CEC (Consumer Electronics Control) protocol. CEC allows external devices which are connected to the »HDMI« sockets by an HDMI cable (e.g. DVD player) to be operated with a remote control. Prerequisite is that the devices connected support CEC. Read the operating manual for the external device to find out how to activate the corresponding function.
opErAtIoNuSINGExtErNALDEvICES----------------------------Deviceoperation You can decide whether external devices should react to your television's remote control. 1 Press »I«, use »C«, »D«, »B« or »A« to select the preset »HDMI1« or »HDMI2« and press »oK« to confirm. 2 Open the menu with »m«. 3 Select the menu item »SOURCE SETUP« with »C« or »D« and press »oK« to confirm. – The »SOURCE SETUP« menu appears. SOURCE SETUP 20.09.2010 15:46 Notes: »RC Passthrough« can be used for all devices.
opErAtIoNuSINGExtErNALDEvICES----------------------------HighdefinitionHDready Connect the corresponding input sources (e.g. HDTV receiver or HDDVD player) to the »HDmI« sockets (for digital HDTV sources). Connectionoptions 7 7 This ensures that you can view digital HDTV programmes, even if they are copy-protected (HDCP High Bandwidth Digital Content Protection), without encountering problems.
OPERATION USING EXTERNAL DEVICES-----------------------------Connecting external devices ... with digital audio/video signals Suitable devices: Digital satellite receivers, Playstation, BluRay player, DVD player/ recorder, set-top box, notebook, PCs. 7 Video signal: Digital video; resolution: standard 576p; HDTV 720p, 1080i. 7 Audio signal: digital audio (stereo, multi-channel compression, uncompressed). 7 Presets »HDMI 1«, »HDMI 2«.
OPERATION USING EXTERNAL DEVICES-----------------------------... with an analogue TV signal Suitable devices: Digital satellite receiver, DVD player/recorder, set-top box, camera recorder. 7 Video signal: FBAS. 7 Audio signal: stereo, analogue. 7 »AV2« preset. 7 1 Connect the »Y/AV2« socket on the television to the corresponding socket of the external device with an RCA cable (video signal).
OPERATION USING EXTERNAL DEVICES-----------------------------Hi-fi system/AV receiver Notes: Playing the audio signal via the HiFi system 1 Connect the »U« sockets on the television to 7 the corresponding socket of the AV receiver with an cable (digital audio signal). Note: If this function is not activated, the audio signal is transmitted to the HiFi system/AV receiver (connected to »U« 3.5 mm ø jack plug) into the headphone socket on the left side of the television.
opErAtIoNASApCmoNItor---------------------------------------------------------- ConnectingapC 1 Connect the »pC-IN« socket on the television to the corresponding socket on the PC using a VGA cable (video signal). 2 Connect the »Audio« socket on the television to the corresponding socket on the PC using a suitable cable (audio signal). Note: 7 Adjust your PC to the monitor (for example, picture resolution 1280 x 768, picture frequency 60 Hz).
Operation with a Common Interface------------------ What is a Common Interface? Common Interface (CI) is an interface for DVB receivers. 7 Encrypted channels can only be viewed with a CA module suitable for the encryption system and in conjunction with the corresponding smart card. 7 The television set is equipped with a Common Interface slot into which CI modules from various providers can be inserted.
SpECIALSEttINGS---------------------------------------------------------------------------------------------------------Searchingfortelevisionchannelsfromthecableprovider automatically 1 Open the menu with »m«. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »oK« to confirm. – The »SOURCE SETUP« menu appears. 3 Select the line »Source« with »C« or »D« and press »oK« to confirm. Select the option »Cable« with »B«, »A«, »C« or »D« and press »oK« to confirm.
SpECIALSEttINGS---------------------------------------------------------------------------------------------------------Searchingfortelevisionchannels fromthecableprovidermanually Searchingfordigitalterrestrial tvchannelsautomatically 1 Open the menu with »m«. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »oK« to confirm. – The »SOURCE SETUP« menu appears. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »oK« to confirm. – The »SOURCE SETUP« menu appears.
Special settings---------------------------------------------------------------------------------------------------------6 Select the line »Scan Typ« with »C« or »D« and set the option »DTV« with »B« or »A«. 7 Start the scan with »●« (red). – All channel and favourites lists will be deleted and compiled anew. Note: After starting the scan, a security query will appear. Press »●« (green) to confirm the option »Yes«. 7 – The »Reults« menu appears, and the scan for TV channels begins.
SpECIALSEttINGS---------------------------------------------------------------------------------------------------------t uninganaloguetelevision channels This setting is only necessary if you cannot receive any digital channels and you have not carried out an analogue search during initial setup. The television channels can be set directly or using the scan. Settingallanaloguetelevision channels Analogue channels are displayed in the channel list after the digital channels.
Special settings---------------------------------------------------------------------------------------------------------Tuning the television channels by entering the channel numbers 1 Open the menu with »M«. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »OK« to confirm. – The »SOURCE SETUP« menu appears. 3 Select the line » Analogue Manual Tuning« with »C« or »D« and press »OK« to confirm. – The menu appears.
Special settings---------------------------------------------------------------------------------------------------------Entering channel names (8 digit maximum) 1 In the »PROGRAME TABLE« menu, select the television channel with »C«, »D«, »B« or »A« and press »●« (red) to confirm. 2 Open the input keyboard with »●« (green). Note: 7 If necessary, delete the current channel name. To do this, select the » « button with »B« or »A« and delete repeatedly using »OK«.
INFORMATION---------------------------------------------------------------------------------------------------------------------Displaying signal information (for digital channels only) 1 Open the menu with »M«. 2 Select the line »SOURCE SETUP« with »C« or »D« and press »OK« to confirm. 3 Select the line »Signal Information« with »C« or »D« and press »OK« to confirm. – Information on the channel, network, modulation, symbol rate, quality and signal strength is displayed.
INFORMATION---------------------------------------------------------------------------------------------------------------------GRUNDIG 22 VLE 8320 BF Product Fiche Energy Efficiency class: B Screen size: 55 cm/22 inch Screen (dm²): 13 dm² Operating voltage: 220-240 V ~ 50-60 Hz or DC 12 V / 2,92 A max. standard adaptor Power consumption: On mode 32 W Standby < 0.
INFORMATION---------------------------------------------------------------------------------------------------------------------Service information for dealers Note for the Product Package The product complies with the following EU directives and regulations: 2006/95/EC: Directive on the harmonisation of the laws of Member States relating to designed for use within certain voltage limits. 2004/108/EC: Directive relating to electromagnetic compatibility.
INFORMATION---------------------------------------------------------------------------------------------------------------------Troubleshooting If the information provided below does not help, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers.