Contents------------------------------------------------------------------------------------------------------------------------------------4 Setup AND SAFETY 6 6 7 7 General information Special features of your television set Receiving digital channels Important notes on environmental protection 8 8 9 Connection and preparation Connecting the antenna and power cord Inserting batteries into the remote control 10 Overview 10 Connections on the television set 11 Controls on the television set 12 The r
Contents------------------------------------------------------------------------------------------------------------------------------------54 OPERATION AS A PC MONITOR 54 Connecting a PC 54 Selecting presets for the PC 54 Settings for PC mode 55 Operation with a Common Interface 55 What is a Common Interface? 55 Inserting the CA module 55 Access control for CI module and smart card 56 57 58 59 60 62 62 62 63 63 63 64 65 Special settings Searching for digital terrestrial TV channels automatically Searchin
Setup AND SAFETY-----------------------------------------------------------------------------------------------------Please note the following instructions when setting up the television set: This television is designed to receive and display video and audio signals. All other uses are expressly prohibited. 7 The ideal viewing distance is five times the diagonal screen size. 7 Light falling on the screen impairs picture uality.
Setup AND SAFETY-----------------------------------------------------------------------------------------------------Do not connect any other equipment while the device is switched on. Also switch off other equipment before connecting it. 7 Do not plug in the power cord of the device until you have connected the external equipment and the antenna. 7 Make sure the mains plug is freely accessible.
General information--------------------------------------------------------------------------------Special features of your television set You can receive and watch digital TV channels using your television set (via DVB-T and DVB-C) – including High Definition programmes (HD). However, the reception of digital TV channels in HD is currently limited to a few countries in Europe.
General information--------------------------------------------------------------------------------Receiving digital channels You require a digital roof antenna or indoor antenna (passive or active indoor antenna with its own power supply) to receive digital television channels (DVB-T). 7 If you wish to receive digital television channels via your cable system (DVB-C), the antenna cable for your cable operator must be connected to the television set.
Connection and preparation----------------------------------------------Connecting the antenna and power cord 2 1 To receive terrestrial digital broadcasters (DVB-T) connect the cable for the rooftop or indoor antenna (passive or active indoor antenna with its own power supply) to the antenna socket »ANT IN« on the television set; or To receive digital cable channels (DVB-C) connect the cable for the rooftop antenna to the antenna socket »ANT IN« on the television set; or To receive analogue TV channels
Connection and preparation----------------------------------------------Inserting batteries into the remote control Environmental note 7 This symbol on rechargeable batteries/batteries or on the packaging indicates that the rechargeable battery/battery may not be disposed of with regular household rubbish. For certain rechargeable batteries/batteries, this symbol may be supplemented by a chemical symbol.
Overview------------------------------------------------------------------------------------------------------------------------------------Connections on the television set AV1 CART socket (FBAS signal, S RGB signal). SPDIF ocket for audio output S (coaxial) for PCM/AC3 signals. For connecting digital AV amplifiers or AV receivers. Optical Out ocket for audio output S (optical) for PCM/AC3 signals. For connecting digital AV amplifiers or AV receivers.
Overview------------------------------------------------------------------------------------------------------------------------------------PC Audio Socket for audio input for a PC. PC-IN VGA socket, video input for PC. ANT IN Controls on the television set 8/I Antenna socket for a DVB-T, DVB-C and analogue antenna. Switches the television on and back into standby mode. The only way to disconnect the television from the mains supply is to pull the plug.
Overview------------------------------------------------------------------------------------------------------------------------------------The remote control – Main functions Switches off (Standby) Switches on from standby; Selects channel – directly pens menu for AV channels O and USB input. Then select using »V«, »<«, »>« or »Λ« and press »●« to confirm. Opens the »PRnP« menu.
Overview------------------------------------------------------------------------------------------------------------------------------------The remote control – All functions v Enlarges the picture. y Selects different subtitles (only for digital television channels) d elects different audio languages S (only for digital television channels) 7 Ends playback of a programme from an external data medium; Ends a recording or playback in time shift mode.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Initial set-up and tuning television channels Selecting language, country and operating mode The television set is equipped with automatic channel search, which searches for terrestrial channels (DVB-T), cable channels (DVB-C) and analogue channels. 1 Switch on the television set from standby with »8«, »1…0« or »P+« or »P-«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Tuning terrestrial television channels (DVB-T) Tuning television channels from the cable provider (DVB-C) 1 In the »Source Setup« menu, in the »Connection Type« line, select the option »Air« with »<« or »>«. 1 In the »Source Setup« menu, in the »Connection Type« line, select the option »Cable« with »<« or »>«. 2 Select the line »Scan Type« with »V« or »Λ«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Changing the program table for the digital channels Selecting channel lists Channels which are found using the scan are saved in the »PROGRAM TABLE«. 2 Select the »SOURCE SETUP« menu with »V« or »Λ« and press »●« to confirm. – The »SOURCE SETUP« menu appears.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Creating lists of favourites You can save your favourite channels in up to four favourites lists (FAV 1 to FAV 4). Notes: Favourites lists must be created separately for all input sources (cable and air). 7 You can select the favourites list by pressing »,«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Picture settings 1 Open the menu with »i«. 2 Select the menu item »PICTURE SETTINGS« with »V« or »Λ« and press »●« to confirm. – The »PICTURE SETTINGS« menu appears. PICTURE SETTINGS Picture Mode 20.09.2010 15:46 User Brightness 50 Contrast 100 Sharpness 75 Colour 65 Colour Temperature Medium Enhanced picture settings DNR Off Mpeg NR.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Sound settings Automatic volume 1 Open the menu with »i«. Television stations broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels. 2 Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »●« to confirm. – The »SOUND SETTINGS« menu appears.
Settings-----------------------------------------------------------------------------------------------------------------------------------------TruBass and Dialog Clarity Audio description (Audio subtitles) The »TruBass« setting produces an increased bass effect. Audio description is an additional audio channel for visually-impaired persons. Descriptions are provided of activities, surroundings, changes of scene, gestures and actors' facial expressions.
Television - OPERATION-------------------------------------------------------------------------------Basic functions Displaying information Switching on and off 1 Display information with »?«. – The display disappears automatically after a short while. 1 Press »8«, »1…0« or »P+« or »P-« to switch on the television from standby mode. 2 Press »8« to switch the television to standby. Selecting channels 1 Press »1…0« to select presets directly. 2 Select channels step by step with »P+« or »P-«.
Television - OPERATION-------------------------------------------------------------------------------Subtitles Electronic TV guide Various subtitles are available on digital television channels. This depends on the programme being broadcast. The electronic TV guide provides an overview of all programmes that will be broadcast in the next week (for digital channels only). 1 Open the selection menu with »y«. 1 Press »TV-G« to display channel information.
Television - OPERATION-------------------------------------------------------------------------------Changing the picture format »Auto« format The television automatically switches to the 16:9 format if this format is detected via the SCART socket. The picture format is automatically switched to »16:9« for 16:9 programmes. 1 Select the picture format with » « (blue). – The picture format (for example »16:9«) is displayed.
HOME NETWORK------------------------------------------------------------------------------------------------------------Network connection Wired network settings You can establish a wired or wireless connection between your television and the local network. There are two ways of making the wired network settings. Wired network connection A Automatic connection, all data regarding the connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically.
HOME NETWORK------------------------------------------------------------------------------------------------------------7 Press » « (green) to make sure that the network connection is established with the current settings. – The messages »Testing ... Please waite« appears, after successfull announcement the messages »Connecting To Gateway: Successful« and then the MAC address and the IP Address. 8 Press »i« to end the setting. Manual connection Certain networks require Static IP address.
HOME NETWORK------------------------------------------------------------------------------------------------------------Wireless network connection Notes: 7 Wireless LAN adaptor supports IEEE 802.11B/G and N communication protocols. We recommend you to use IEEE 802.11N protocol to obtain the best performance in HD video playback. 7 7 7 1 Connect Grundig WiFi USB dongle to the »USB« or »USB HDD« socket of your television in order to connect the television to a wireless network.
HOME NETWORK------------------------------------------------------------------------------------------------------------Wireless network settings There are two ways of making the wireless network settings. A Automatic connection, »Apart from Access Point Selection, all data regarding the connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically.
HOME NETWORK------------------------------------------------------------------------------------------------------------Manual connection Certain networks require Static IP address. If your network requires a Static IP address, you must enter the »IP Address«, »Netmask«, »Gateway« and »DNS« values manually. You can obtain your »IP Address«, »Netmask«, »Gateway« and »DNS« values from your Internet Service Provider (ISP). 1 Open the menu with »i«.
HOME NETWORK------------------------------------------------------------------------------------------------------------Playback the video, music and image files with home network connection You can easily access the Video, music and image files on the server through the DLNA menu of your television. Notes: 7 You can share your videos, music or photographs via devices such as a PC, Mobile Phone or NAS (Network Attached Storage) functioning as a DLNA compatible DMS (Digital Media Server).
HOME NETWORK------------------------------------------------------------------------------------------------------------7 7 Only the formats with a DLNA certificate (»AAC_ADTS_320«, »LPCM«, »MP3«, »WMABASE« and »WMAFULL«) are supported from among the audio files played from DMS device. Only the formats with a DLNA certificate (»JPEG_LRG«, »JPEG_MED« and »JPEG_ SM«) are supported from among the picture files played from DMS device. 6 Press »z« to return to the DMS list page.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Information on recording and playing television programmes Possible limitations when using an external data medium ■ Recording Depending on the broadcaster, you may experience various restrictions on some of the functions from some television channels. and playback of television programmes is only possible with digital television channels (DVB-T and DVB-C).
USB RECORDING- ------------------------------------------------------------------------------------------------------------Connecting external data media Notes: 7 Before connecting the data medium, switch the television to standby with »8«. Connect the device and then switch the television on again. 7 Before removing the external data medium, the television must be switched to standby, so that no data loss occurs. Your television features two USB sockets, »USB HDD« and »USB«.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Switching on automatic preview If the automatic preview is switched on, a preview of the selected file appears in the file browser. 1 Select the line »Auto Preview« with »V« or »Λ«. 2 Switch on the function with »<« or »>« (»On«). 3 Press »i« to end the setting.
USB RECORDING- ------------------------------------------------------------------------------------------------------------″Pausing” time shift programmes You can pause the programme you are watching. This is a useful function, for example if the telephone rings while you are watching a film and you do not want to miss anything. A freeze-frame display of the last scene appears on the screen and the programme is recorded in the time shift memory of the external data medium.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Recording a programme from the channel list Presetting programmes to be recorded 1 Open the »CHANNEL LIST« with »●«. ... using the electronic TV guide 2 Select a television channel with »V«, »Λ«, »<« or »>« and press »●« to confirm. 3 Press »i« to exit the channel list. 4 Press » « to start recording.
USB RECORDING- ------------------------------------------------------------------------------------------------------------... by manual data entry You can preset up to 25 programmes for timer recording. 1 Press »TV-G« to display channel information. – The electronic TV guide appears. 2 Open the »MAKE SCHEDULE« menu by pressing » « (yellow) twice. 3 Select the line »Type« with »V« or »Λ« and select the option »Recording« with »<« or »>«.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Playback The recorded programmes – whether started manually or using the timer function – are stored on the external data medium. You can open the archive on the external data medium by pressing » «. Selecting a programme from the archive 1 Open the »Recorded Event« menu with » «. – The menu appears. 2 Select the programme of your choice with »V« or »Λ« and start playback with »8«.
USB OPERATION---------------------------------------------------------------------------------------------------------------File formats Image data Your television can work with the following file formats using the USB sockets: Your television can display pictures in the formats JPEG, PNG and BMP. JPEG stands for Joint Picture Experts Group. It denotes a process for compressing picture files. PNG and BMP are process used to save image data with no, or very little, losses.
USB OPERATION---------------------------------------------------------------------------------------------------------------Connecting external data media Before connecting the data medium, switch the television to standby using »8 «. Connect the device and then switch the television on again. Before removing the external data medium, the television set must be switched to standby, so that no data loss occurs.
USB OPERATION---------------------------------------------------------------------------------------------------------------The file browser Switching on automatic preview The file browser displays video, audio and picture files stored on external data media. If this function is switched on, a preview of the selected file then appears in the file browser. If an external data medium contains files in ifferent formats, you can, when necessary, filter d out the formats not required.
USB OPERATION---------------------------------------------------------------------------------------------------------------Basic playback functions 1 Select the data medium by pressing »AV«, use »V«, »Λ«, »<« or »>« to select the option »USB« and press »●« to confirm. – The file browser appears. 2 Select the file format (video files, audio files, picture files) with »V« or »Λ«. 3 Switch to the folder/file list with »●«.
USB OPERATION---------------------------------------------------------------------------------------------------------------Additional playback functions Selecting a certain passage for playback Depending on the file format, the following additional functions are available: (video files only) 1 During playback, press »●«. Selecting chapters on DivX® files 2 Enter the passage (time) with »1 ... 0« and press » « (green) or »●« to confirm.
Teletext OPERATION----------------------------------------------------------------------------------------------TOP text or FLOF text mode Enlarging the character height 1 Press »TXT« to switch on teletext. If you have difficulty reading the text on the screen, you can increase the character height. 2 Select teletext pages directly with »1...0« or step by step with »V« and »Λ«. Return to teletext page 100 with »?«.
Convenience functions------------------------------------------------------------------------Opening the SETTINGS menu Changing the audio language 1 Open the menu with »i«. (only for digital television channels) 2 Select the »SETTINGS« menu with »V« or »Λ« and press »●« to confirm. – The »SETTINGS« menu appears. You can define a primary and a secondary audio language. 20.09.
Convenience functions------------------------------------------------------------------------Setting the date and time Timer settings Setting the time Entering the switch-off time (sleep timer) Your television set detects the difference in time to Greenwich Mean Time (GMT) automatically, as long as the channel selected transmits a time signal.
Convenience functions------------------------------------------------------------------------6 Select the line »Volume« with »V« or »Λ« and use »<« or »>« to set the volume. 7 Select the line »Set Hour« with »V« or »Λ« and enter the time with »1…0«. 8 Save the data with » « (green). Note: 7 You can abort the entry by pressing » (red). « 9 Press »i« to end the setting. In the »Auto Off« menu, you can enter a time for the television to switch off.
Convenience functions------------------------------------------------------------------------Changing the PIN code Updating software You can also enter a personal PIN code instead of the default code »1234«. Please take note of your own PIN code. (for digital channels only) 1 Select »Set PIN« with »V« or »Λ« and press »●« to confirm. 2 Enter the current PIN code 1 2 3 4 with »1 ... 0«. 3 Enter your new four digit PIN code with »1 ... 0«. 4 Enter your new four digit PIN code with »1 ... 0« again.
OPERATION USING EXTERNAL DEVICES-----------------------------DIGI LINK Your television is equipped with the DIGI LINK function. This function uses the CEC (Consumer Electronics Control) protocol. CEC allows external devices which are connected to the »HDMI« sockets by an HDMI cable (e.g. DVD player) to be operated with a remote control. Prerequisite is that the devices connected support CEC. Read the operating manual for the external device to find out how to activate the corresponding function.
OPERATION USING EXTERNAL DEVICES-----------------------------Device operation Switching the device to standby You can decide whether external devices should react to your television's remote control. This option switches the external device to standby. 1 Press »AV«, use »V«, »Λ«, »<« or »>« to select the preset »HDMI1« to »HDMI4« and press »●« to confirm. 1 Press »AV«, use »V«, »Λ«, »<« or »>« to select the preset »HDMI1« to »HDMI4« and press »●« to confirm. 2 Open the menu with »i«.
OPERATION USING EXTERNAL DEVICES-----------------------------High definition HD ready Connect the corresponding input sources (e.g. HDTV receiver or HD-DVD player) to the »HDMI« sockets (for digital HDTV sources). This ensures that you can view digital HDTV rogrammes, even if they are copy-protected p (HDCP High Bandwidth Digital Content Protection), without encountering problems.
OPERATION USING EXTERNAL DEVICES-----------------------------Connecting external devices ... with digital audio/video signals Suitable devices: Digital satellite receivers, Playstation, BluRay player, DVD player/ recorder, set-top box, notebook, PCs. 7 Video signal: Digital video; resolution: standard 576p; HDTV 720p, 1080i, 1080p. 7 Audio signal: digital audio (stereo, multi-channel compression, uncompressed). 7 Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or »HDMI4«.
OPERATION USING EXTERNAL DEVICES-----------------------------... with an analogue TV signal Suitable devices: Digital satellite receiver, DVD player/recorder, set-top box, camera recorder. 7 Video signal: FBAS. 7 Audio signal: stereo, analogue. 7 »AV2« preset. 7 1 Connect the »Video« socket on the television to the corresponding socket of the external device with an RCA cable (video signal).
OPERATION USING EXTERNAL DEVICES-----------------------------Hi-fi system/AV receiver Connecting the hi-fi system/ AV receiver 1 Connect the »Optical Out« socket on the television to the corresponding socket of the device with an optical digital cable (digital audio signal); or connect the »SPDIF« socket on the television to the corresponding socket of the AV receiver with an RCA cable (digital audio signal).
OPERATION AS A PC MONITOR---------------------------------------------------------- Connecting a PC 1 Connect the »PC-IN« socket on the television to the corresponding socket on the PC using a VGA cable (video signal). 2 Connect the »PC Audio« socket on the television to the corresponding socket on the PC using a suitable cable (audio signal). Note: Adjust your PC to the monitor (for example, picture resolution 1280 x 768, picture frequency 60 Hz).
Operation with a Common Interface------------------ What is a Common Interface? Common Interface (CI) is an interface for DVB receivers. 7 Encrypted channels can only be viewed with a CA module suitable for the encryption system and in conjunction with the corresponding smart card. 7 The television set is equipped with a Common Interface slot into which CI modules from various providers can be inserted.
Special settings---------------------------------------------------------------------------------------------------------Searching for television channels from the cable provider automatically 1 Open the menu with »i«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »●« to confirm. – The »SOURCE SETUP« menu appears. 3 Select the line »Source« with »V« or »Λ« and press »●« to confirm. Select the option »Cable« with »<«, »>«, »V« or »Λ« and press »●« to confirm.
Special settings---------------------------------------------------------------------------------------------------------Searching for television channels from the cable provider manually Searching for digital terrestrial TV channels automatically 1 Open the menu with »i«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »●« to confirm. – The »SOURCE SETUP« menu appears. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »●« to confirm. – The »SOURCE SETUP« menu appears.
Special settings---------------------------------------------------------------------------------------------------------6 Select the line »Country« with »V« or »Λ« and press »●« to confirm. In the country selection menu, select the country with »<«, »>«, »V« or »Λ« and press »●« to confirm. 7 Select the line »Scan Typ« with »V« or »Λ« and set the option »DTV« with »<« or »>«. 8 Start the scan with » « (red). – All channel and favourites lists will be deleted and compiled anew.
Special settings---------------------------------------------------------------------------------------------------------Tuning analogue television channels This setting is only necessary if you cannot receive any digital channels and you have not carried out an analogue search during initial setup. The television channels can be set directly or using the scan.
Special settings---------------------------------------------------------------------------------------------------------Tuning the television channels by entering the channel numbers 1 Open the menu with »i«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »●« to confirm. – The »SOURCE SETUP« menu appears. 3 Select the line » Analogue Manual Tuning« with »V« or »Λ« and press »●« to confirm. – The menu appears.
Special settings---------------------------------------------------------------------------------------------------------Entering channel names (8 digit maximum) Creating lists of favourites 1 In the »PROGRAME TABLE« menu, select the television channel with »V «, »Λ«, »<« or »>« and press » « (red) to confirm. 2 Mark the television channel with » (green). « 3 Select the digits or letters with »Λ« or »V« and use »<« or »>« for the next position, and repeat the entry.
INFORMATION---------------------------------------------------------------------------------------------------------------------Displaying signal information (for digital channels only) 1 Open the menu with »i«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »●« to confirm. 3 Select the line »Signal Information« with »V« or »Λ« and press »●« to confirm. – Information on the channel, network, modulation, symbol rate, quality and signal strength is displayed.
INFORMATION---------------------------------------------------------------------------------------------------------------------Technical data Operating voltage: 220–240 V,~, 50–60 Hz Power consumption: Operational 85 W Standby 0,38 W Maximum power consumption: Operational 110 W Annual power consumption 127 kWh Audio output: 2 x 20 W music power output 2 x 10 Sine wave power Rohs Limits: Pb (Lead)/Hg (Mercury) Pb meets ROHS directive / 0 mg Peak luminance: (area, home, maximum) % 70 / 350 / 430 Digital re
INFORMATION---------------------------------------------------------------------------------------------------------------------Troubleshooting If the information provided below does not help, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers.
INFORMATION---------------------------------------------------------------------------------------------------------------------Additional Information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply. The range of multi-system receivers is built to work in most European countries. However, the mains plug and socket system for the UK differs from many European countries.
www.grundig.