LCD TV with LED Backlight 32 VLE 7421 BL EN
Table of Contents--------------------------------------------------------------------------------4 SET-UP AND SAFETY 6 6 7 7 7 7 GENERAL INFORMATION Special features of your television set Receiving digital stations GRUNDIG SCR System Important notes on environmental protection Notes on still images 8 8 9 CONNECTION/PREPARATION Connecting the antenna and power cord Inserting batteries in the remote control 10 OVERVIEW 10 Connections on the television set 11 Control buttons on the TV 12 Remote control -
Table of Contents--------------------------------------------------------------------------------65 65 65 66 66 67 67 68 68 68 68 69 69 69 70 71 CONVENIENCE FUNCTIONS TV Settings Language & Keyboard settings Accessibility settings Accessories Advanced settings Power save mode Functions in the “About” menu Software update (OAD) Software update (Internet) Software update (USB) Resetting the television to its original state Deleting channel history Timer settings Date and time settings Parental settings 73 7
SET-UP AND SAFETY- ---------------------------------------------------------------------------------Please note the following information when setting up your television set. This television set is designed to receive and display video and audio signals. Any other use is strictly prohibited. 7 Best viewing distance is 5 times the diagonal length of the screen. 7 External light falling on the screen impairs picture quality.
SET-UP AND SAFETY- ---------------------------------------------------------------------------------To prevent the spread of fire, keep candles or other open flames away from this product at all times. 7 Do not leave your television turned on if you are not watching it; switch it to standby. If you will not use your television for a long time, leave it in off mode by switching off from the mains (if any) or by unplugging.
GENERAL INFORMATION------------------------------------------------------------------Special features of your television set Your television set enables you to receive and watch digital stations (via DVB-S, DVB-T and DVB-C), including the High Definition (HD) ones. At present, reception for these digital television stations in High Definition is only possible in some countries in Europe.
GENERAL INFORMATION------------------------------------------------------------------Devices that contain and serve video, music or image files are called Server. This television receives video, music and image files from the server through home network, allowing you to access and play such media even when your television is located in a different room then the server.
ConneCTIon/PRePaRaTIon----------------------------------------------------Connectingtheantennaandpowercord 3 1 To receive digital satellite channels (DVB-S), connect the satellite antenna cable to the antenna socket »saTellITe« on the television set; and / or 2a To receive terrestrial digital broadcasters (DVB-T) connect the cable for the rooftop or indoor antenna (passive or active indoor antenna with its own power supply) to the antenna socket »anTIn« on the television set; or 2b To receive digit
CONNECTION/PREPARATION-----------------------------------------------------Inserting batteries in the remote control Environmental note This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.
oVeRVIeW-------------------------------------------------------------------------------------------------------------Connectionsonthetelevisionset USB 3.0 audio Audio signal input for PC. PC-In VGA socket, video signal input for PC. CoMPonenT lR Audio signal input (YUV signal). PrPbY Video signal input (YUV signal). aV1/s-VHs Euro/AV socket (CVBS signal, RGB signal); video signal input for S-Video camera (with Scart-S-VHS converter).
OVERVIEW--------------------------------------------------------------------------------------------------------------LAN etwork cable connection N socket. SATELLITE Satellite antenna socket. ANT IN Antenna socket. HDMI4 (ARC) DMI socket, audio/video H signal input (HDMI). HDMI3 DMI socket, audio/video H signal input (HDMI). U eadphone connection (3.5 H mm jack); External audio output (with headphone-RCA converter).
OVERVIEW--------------------------------------------------------------------------------------------------------------Remote control - main functions Switches on from standby mode; selects channels directly. Selects the channel list (»ALL«, »FAV 1« to »FAV 4«). Turns on and off the television set (stand-by). witches between teletext S and TV modes. Exits menu and applications. Opens MyApps menu. Displays information. Opens the menu. Opens the channel list.
OVERVIEW--------------------------------------------------------------------------------------------------------------Remote control - all functions Selects a page in teletext mode; (red) (green) Selects/activates various functions (yellow) in menus. (blue) 5 Switches to double character size in teletext mode; selects the previous track/previous picture in the file browser. 6 Updates a page in teletext mode; selects the next track/next picture in the file browser.
SETTINGS------------------------------------------------------------------------------------------------------------------Initial set-up There are various options when using WLAN: The Television is fitted with an “installation assistant”, which guides you step by step through the basic settings. Automatic connection, Using the screen dialogue, the user guide enables supposedly complex settings and data entries to be presented simply and clearly for everybody.
SETTINGS------------------------------------------------------------------------------------------------------------------Initial set-up – overview Select language (page 16, step 3) Select country (page 16, step 5) Select mode (page 16, step 6) Network setup (page 16, step 8) Wired Wireless Wireless WPS (page 16, step 8) (page 17, step 13) (chapter page 36) Auto Manually Auto Manually Button PIN (page 16, step 8) (chapter page 34) (page 17, step 13) (Chapter page 38) (Chapter page 36)) (
SETTINGS------------------------------------------------------------------------------------------------------------------Arrange Initial set-up – »Enhanced« – if you will use the television for a demo presentation, increased image and volume settings are used in this mode. Increased mode consumes more energy. 1 Switch the television to standby with the power switch »ON • OFF«. 2 Switch on the television set from standby with »8«, »1…0«, »P+« or »P–«.
SETTINGS------------------------------------------------------------------------------------------------------------------Note: Continue searching for TV channels with: – point 22 for DVB-S reception; – point 26 for DVB-C reception; – point 31 for DVB-T reception. 7 Connecting automatically by entering the network password 13 Press »V«, the line »Change Connection Type« is selected and press »OK« to confirm. 21 To switch to »Source Setup« menu press »« (blue).
SETTINGS------------------------------------------------------------------------------------------------------------------Tuning cable digital television channels (DVB-C) 26 Select the option »Cable« with »<« or »>« and press »OK« to confirm. 27 Select the line »Scan Type« with »V« or »Λ«. Select the option »Quick« or »Full« with »<« or »>«. – »Quick« scanning function sets the channels according to the cable operator information in the broadcasting signal.
SETTINGS------------------------------------------------------------------------------------------------------------------Changing the Channel Editor for the digital channels Opening the Programme Table Channels found at the end of the search are stored in the »Channel Editor«. 2 Activate the »Settings« menu with »OK«. You can delete channels which are not required from the programe table, you can change the order of channels within the programe table and lock individual channels (Parental control).
SETTINGS------------------------------------------------------------------------------------------------------------------Searching channels by name in the Channel Editor While arranging the channels in the Channel Editor, you can search and select the channel name by the first three characters. 1 In the »Channel Editor« menu, select the search mode by pressing »« (red). 2 Select the first character of the channel name you want to search with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
SETTINGS------------------------------------------------------------------------------------------------------------------Sequencing channels in the Channel Editor You can sequence the channels in the Channel Editor according to different criteria such as TV, radio or scrambled / unscrambled. 1 To sequence the channels according to different criteria in the »Channel Editor« menu, press »« (yellow). 2 Select the sequencing criteria you want with »V« or »Λ« and press »OK« to confirm.
SETTINGS------------------------------------------------------------------------------------------------------------------Enter own names for the favourites lists (max. 7 characters) You can rename all favorites lists. 1 To recall favorites list menu when no menu is opened on the screen, press »FAV«. 2 Select the favorites list you want to rename with »<« or »>« and press»« (blue) button. – Virtual keyboard will be displayed. 3 To delete the current name step by step, press »« (red).
seTTInGs-----------------------------------------------------------------------------------------------------------------Picturesettings enhancedpicturesettings 1 Open the menu with »MenU«. The “enhanced picture settings” are in principal digital image improvements which, however, should be only used when necessary when picture quality and transmission is excellent.
SETTINGS------------------------------------------------------------------------------------------------------------------»Perfect Clear« – Improves the general image by means of a gentle blue hue (giving the appearance of greater sharpness) and improves the black level by setting this entirely to black from specific shade of back. This reduces the visible grey values in the dark areas of the picture. 7 »Film mode« detects and processes feature films automatically for all channel sources.
seTTInGs-----------------------------------------------------------------------------------------------------------------soundsettings nightMode 1 Open the menu with »MenU«. Night Mode prevents sound fluctuations and volume increases. 2 Activate the menu item »Settings« with »oK«. 3 Select the menu item »Sound Settings« with »>« or »<« and press »oK« to confirm. – »Sound Settings« menu is displayed. < Picture Settings Source Setup > Sound Settings 1 Select the line »Night Mode« with »V« or »Λ«.
SETTINGS------------------------------------------------------------------------------------------------------------------Automatic volume The television channels broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels. 1 Select the line »Advanced« from the Sound Settings menu with »V« or »Λ« and press »OK« to confirm. 2 Select the line »AVL« with »V« or »Λ« and then select »On« with »<« or »>«.
TELEVISION OPERATION---------------------------------------------------------------------Basic functions Selecting stations from lists Switching on and off You can select stations from various lists, (e.g. ALL, FAV1-FAV4). 1 Switch the television to standby with the power switch »ON • OFF«. 2 Press »8«, »1…0« or »P+« or »P-« to switch on the television from standby mode. 3 Press »8« to switch the television to standby. 4 Switch the television to standby with the power switch »ON • OFF«.
TELEVISION OPERATION---------------------------------------------------------------------Audio settings Zoom function 1 Open the Tools menu with »TOOLS«. With this function, you can enlarge the picture on the television. 2 Select the line »Sound Presetting« with »V« or »Λ«. 3 Select the audio setting by pressing »<« or »>«. – You can change the »User« audio setting; see “Equalizer” on page 25. 4 Press »EXIT« to end the settings.
TELEVISION OPERATION---------------------------------------------------------------------Zap function This function allows you to save the television channel which you are currently watching and switch to other channels (zapping). 1 Select the channel you want to save in the zap memory with »1…0« or »P+«, »P-« (for example, channel 1, BBC 1) and save with »BACK <«. 2 Change channels with »1…0« or »Λ« »V«.
TELEVISION OPERATION---------------------------------------------------------------------4 Switch to the information about the current programme using »OK«. Notes: To call up further information about the programme press »V« or »Λ« repeatedly. 7 To display a small image of the programme select the »Watch« button with »>« and confirm with »OK«. 7 The programme selected can be recorded (if an external data medium is connected).
TELEVISION OPERATION---------------------------------------------------------------------Changing the picture format »Panorama« format The television automatically switches to the 16:9 format if this format is detected via the Euro-AV socket. This setting is suited to films with a large width/ height ratio. During programmes in 4:3 format the picture is stretched horizontally if the »Panorama« function is selected. The picture geometry is stretched horizontally. 1 Open the Tools menu with »TOOLS«.
neTWoRKseTUP------------------------------------------------------------------------------------------To use the functions “GRUNDIG AppLICATION store” and “Operation with Digital Media Server”, you must connect the television to your home network with internet access and log on. Grundig Application Store is a depot where you can find various applications that you may use on your Grundig TV. You can download many applications from Grundig Application Store.
neTWoRKseTUP------------------------------------------------------------------------------------------Wirednetworksettings There are two ways of making the wired network settings. a Automatic connection, All data regarding connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically. b Manual connection, all data regarding connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) must be configured manually.
neTWoRKseTUP------------------------------------------------------------------------------------------Manualconnection Certain networks require Static IP address. If your network requires a Static IP address, you must enter the »IP Address«, »Netmask«, »Gateway« and »DNS« values manually. You can get »IP Adress«, »Netmask«, »Gateway« and »DNS« values (IPS) from your Internet Service Provider. 1 Open the menu with »MenU«. 2 Activate the menu item »Settings« with »oK«.
neTWoRKseTUP------------------------------------------------------------------------------------------Wirelessnetwork 7 Wirelessnetworkconnection There are different ways of making the wireless network settings. »Wireless« and »Wireless WPS« (WiFi Protected Setup). 7 Placing the modem or wireless network sharer on an elevated location will increase the wireless connection reception strength.
neTWoRKseTUP------------------------------------------------------------------------------------------Technicalrequirements Most of the home networks are Dynamic. If you have a dynamic network, you must use a DSL modem that supports DHCP. Modems and IP sharers that support DHCP obtain the »IP Address«, »Netmask«, »Gateway« and »DNS« values required for internet access automatically, and thus you are not required to enter those values manually.
neTWoRKseTUP------------------------------------------------------------------------------------------8 Select the line »Select Access Point« with »V« or »Λ« and press »oK« to confirm. – Present WPS-supported wireless networks are scanned to display in the »Select Access Point« menu. 9 Select the network that you want to connect with »V«, »Λ«, »<« or »>« and press »oK« to confirm. – 8-digit pin code is displayed in the wireless WPS menu.
neTWoRKseTUP------------------------------------------------------------------------------------------10 Select the required character with »V«, »Λ«, »<« or »>« and move to the next character with »oK«. – Using »shift« ➡ »oK«, you can switch between uppercase letters / numbers and lowercase letters / special characters. – Select » « to delete the character entered and press »oK« to confirm. Manualconnection 11 Confirm the password with »« (green). – »Connecting ...
NETWORK SETUP------------------------------------------------------------------------------------------12 Select the line »Gateway« with »V«. Enter Gateway address with »1…0«. 13 Select the line »Select Access Point« with »Λ« or »V« and press »OK« to confirm. – »Select Access Point« menu is displayed by scanning available wireless networks. 14 Select the network that you want to connect with »V«, »Λ«, »<« or »>« and confirm with »OK«. – Wireless connection password screen is displayed.
NETWORK SETUP------------------------------------------------------------------------------------------Connecting the TV to a “hidden” network Even if the SSID (Service Set Identifier) of the router is not visible, you can connect your TV to this network. 1 Open the menu with »MENU«. 2 Activate the menu item »Settings« with »OK«. 3 Select the menu item »Network Configuration« with »>« or »<« and press »OK« to confirm. – »Network configuration« menu is displayed.
SMART Inter@ctive TV 3.0 FEATURE--------------------------------SMART Inter@ctive TV 3.0 internet applications In Login process of some applications, it may be required to connect to the web page of the related application. Subject web pages may contain links not related to Login process. When connecting those links, TV may access open web and view contents that are not supported by your TV. As you are on open web, your TV cannot control those unsupported contents or cannot be held responsible for them.
SMART Inter@ctive TV 3.0 FEATURE--------------------------------Navigation and entering text during registration 1 Press »@« to open »MyApps« menu. – Grundig Smart Apps registry screen is displayed. Creating a Grundig Application Store account You must register to access all applications in Grundig Application Store. 1 Press »@« to open »MyApps« menu. – Grundig Smart App registry screen is displayed. 2 Press »OK« to start registration.
SMART Inter@ctive TV 3.0 FEATURE--------------------------------7 Enter telephone number (optional): Enter the data, use »V«, »Λ«, »<« and »>« to select »<« and press »OK« to confirm. 8 To complete registration process press »« (blue). 9 Press »OK« to read and accept conditions of use. – »Inter@ctive Applications« menu will be displayed, and standard applications will be downloaded and installed to your TV.
sMaRTInTeR@CTIVeTV3.0feaTURe-------------------------------selectinginternetapplications Downloadingandinstallinginternetapplications 1 Press »@« to open »MyApps« menu. – My Apps menu will be displayed. App. Store My App User 1 Select the desired category in Grundig Online Applications with »V« or »Λ« and press »>« to pass to application field; or select the application you want with numeric buttons.
SMART Inter@ctive TV 3.0 FEATURE--------------------------------Uninstalling internet applications 1 Press »« (red) button in »My apps« menu and select categories with »<« or »>«. 2 Select the application you want to uninstall with »V«, »Λ«, »<« or »>«. 3 Actiade the tools menu by pressing »« (blue), select the option »Uninstall« with »<« or »>« and press »OK« to confirm. – A warning message appears.
sMaRTInTeR@CTIVeTV3.0feaTURe-------------------------------smartInter@ctiveTV3.0browsermainmenu 1 Applications. 2 My apps 2 Push button to the Application store. Online Store 3 1 3 Search bar. 4 Categories menu. 5 Tools menu. 6 Exit. Categories 4 navigatinginthemainmenu 1 Press »« (red) button in »My apps« menu and select categories with »<« or »>«. Tools 5 Exit 6 6 »V«, »Λ«, »<«, »>« allows sliding of the navigation keys in the applications and virtual keyboard.
WebbRoWseR------------------------------------------------------------------------------------------------Webbrowsermenu 3 4 5 6 7 8 9 10 11 12 13 14 15 http://www.grundig.de grundig. 2 16 1 Zoom Out Zoom In Page Up Page Down Navigation Process Menu Tool Bar 1 Menu controls. Webbrowser 2 Active tab. Web browser allows you to navigate in the Internet. 3 Previous page. 4 Next page. 5 Refresh. 6 New tab. 7 Address bar. 8 Search in site. 9 Favorites.
MUlTIMeDIaseRVeRMoDe----------------------------------------------------------Playingthevideo,musicand imagefileswithhomenetwork connection selectingthedigitalmedia server With DLNA menu of your television, you can easily access Video, music and photo files on server; and thanks to DMR feature, you can automatically start and stop media playing on devices with DMC feature. 2 Select the menu item »DLNA« with »>« or »<« and press »oK« to confirm. – »Media Player« menu is displayed.
MULTIMEDIA SERVER MODE-----------------------------------------------------------Audio files played through DMS device support following formats that have obtained DLNA certificate: »AAC_ADTS_320«, »LPCM«, »MP3«, »WMABASE« and »WMAFULL«. Playback Image files played through DMS device support following formats that have obtained DLNA certificate: »JPEG_LRG«, »JPEG_ MED« and »JPEG_SM«. 2 Select the desired title with »V«, »Λ«, »<« or »>«.
UsbReCoRDInG------------------------------------------------------------------------------------------Informationonrecordingand playingtelevisionprogrammes 7 7 7 7 7 Recording and reproducing programmes, this can only be done with digital television stations (DVB-S, DVB-T and DVB-C). Depending on the broadcasting station, you may experience various restrictions on some functions from some television stations.
UsbReCoRDInG------------------------------------------------------------------------------------------Connectingexternaldatamedia notes: It is advised to put the television on stand-by mode before connecting the Skype camera. 7 7 Before disconnecting the external data medium, the television must first be switched to standby, otherwise files can be damaged. There are three USB inputs on the television, namely »Usb«, »Usb« and »Usb3.0«. »Usb3.
USB RECORDING-------------------------------------------------------------------------------------------Disconnecting external data media 1 In the »Disk Management« menu select the line »Safely Remove Disk« with »V« or »Λ« and press »OK« to confirm. Note: 7 Disk can be safely removed from the socket now. Selecting external data media If there are more than one external data media connected to the television, then select one of them.
USB RECORDING-------------------------------------------------------------------------------------------″Pausing” time shift programmes You can pause any program you are watching. This is a useful function. For instance, if the phone rings when you are watching a movie, you can pause the movie and resume it after the call without missing nothing. The last scene that was frozen is displayed and time shift is recorded into the external data media.
USB RECORDING-------------------------------------------------------------------------------------------Recording a programme from the channel list 1 Press »OK« to open the channel list. 2 Select a channel with »<« or »>« and press »OK« to confirm. 3 Press »EXIT« to exit from the channel list. « (red) to start recording. 4 Press » – Recording information is displayed: Recording symbol, channel name, programme time and recording time. – These information will disappear after a short while.
USB RECORDING-------------------------------------------------------------------------------------------... by entering the information manually Editing the timer 25 TV programmes can be preset for the timer recording or as a reminder. 1 Open the menu with »MENU«. 1 Press »GUIDE« to open the electronic programme guide. 2 Press »« (yellow) button. 3 Select the line »Manual Record« with »V« or »Λ« and press »OK« to confirm. – »Channel« is marked.
USB RECORDING-------------------------------------------------------------------------------------------Playback Playback during a recording Either started manually or with the timer function, the recorded programmes are all stored in the external data media. You can display an archive on an external data media from »Media Player« menu. You can either watch the current programme that is being recorded or a previously recorded programme while recording takes place.
USB OPERATION--------------------------------------------------------------------------------------------File formats Image data Your television can be operated via the USB input with the following file formats: Your television can display picture data in JPEG, PNG and BMP formats. JPEG stands for Joint Picture Experts Group. This process is intended to compress picture files. PNG and BMP standards are intended to compress picture data without loss.
UsboPeRaTIon-------------------------------------------------------------------------------------------Connectingexternaldatamedia It is advised to put the television on stand-by mode before connecting the external data medium. Connect the device and then switch the television on again. Before disconnecting the data medium, the television must first be switched to standby, otherwise files can be damaged.
UsboPeRaTIon-------------------------------------------------------------------------------------------Thefilebrowser settingsintheUsbsetupmenu The file browser displays the video, audio and picture data that the external data medium provides. selectingthemenu If a data medium contains different file formats, you can deactivate data (Video file, Audio file, Picture file) you do not need for the playback using a filter function.
USB OPERATION--------------------------------------------------------------------------------------------Selecting the display duration of the slide show 1 Select the line »Slide Show Interval« with »V« or »Λ«. 2 Select the time (3, 5, 10 seconds) with »<« or »>«. 3 Press »EXIT« to end the setting. Subtitle settings If the film has subtitles, you can turn on and off this subtitle, change its size, colour or eliminate synchronisation shift with the subtitle.
USB OPERATION--------------------------------------------------------------------------------------------Playback basic functions 1 Open the menu with »MENU«. 2 Select the menu item »Media Player« with »>« or »<« and press »OK« to confirm. – »Media Player« menu is displayed. 3 Select the external data medium with »<« or »>« and press »OK« to confirm. – Media Player menu of the selected external data medium is displayed.
USB OPERATION--------------------------------------------------------------------------------------------Additional playback functions Move to desired time Depending on the file formats used, the following additional functions are possible. (only video files) Selecting partition in DivX Plus® HD files 2 Enter the time that you want to move to with »1...0« and confirm with »« (green). (only supported video files) Searching forward 1 During playback, select the next chapter with »>«.
TELETEXT MODE------------------------------------------------------------------------------------------------Note: If you only want to use this “normal” video text, disable the digital video text, see page 92. 7 TOP text or FLOF text mode 2 Press »6« to switch to the teletext page. Increasing character size If you have difficulty reading the text on the screen, you can double the character size. 1 Press »TXT« to switch to the Teletext mode.
InTeRaCTIVePoRTal(HbbTV)---------------------------------------------------WhatisHbbTV? This service provided by ARD includes “Das Erste1Mediathek” along with teletext restructured graphically with high definition images. ZDF service includes “ZDF mediathek” and other programme information (as of July 2012). HbbTV provides next generation interactive teletext broadcast with its modern structure, content and high definition (HD) image and videos.
ConVenIenCefUnCTIons-----------------------------------------------------------TVsettings 1 Open menu with »MenU« button. 2 Activate the menu item »Settings« with »oK«. 3 Select the menu item »TV Settings« with »>« or »<« and press »oK« to confirm. – »TV Settings« menu is displayed.
CONVENIENCE FUNCTIONS-----------------------------------------------------------Accessibility settings Accessories 1 Open menu with »MENU« button. You can connect various accessories to your television to use with video talk, volume control, motion control or a keyboard and mouse to use in your web browser. Display the status of the connected accessory from this menu to perform various adjustments. 2 Activate the menu item »Settings« with »OK«.
CONVENIENCE FUNCTIONS-----------------------------------------------------------Advanced settings Store logo view 1 Open menu with »MENU« button. This function is intended for feature introduction at stores. When »On« is selected, feature logos are displayed. 2 Activate the menu item »Settings« with »OK«. 3 Select the menu item »TV Settings« with »>« or »<« and press »OK« to confirm. 4 Select the line »Advanced Settings« with »V« or »Λ« and press »OK« to confirm.
CONVENIENCE FUNCTIONS-----------------------------------------------------------Functions in the “About” menu Software update (Internet) 1 Open menu with »MENU« button. (only for digital television channels) 2 Activate the menu item »Settings« with »OK«. 3 Select the menu item »TV Settings« with »>« or »<« and press »OK« to confirm. 4 Select the line »About« with »V« or »Λ« and press »OK« to confirm. 1 From the »About« menu use »V« or »Λ« to select the line »Software Updates« and press »OK« to confirm.
ConVenIenCefUnCTIons-----------------------------------------------------------Resettingthetelevisiontoits originalstate Timersettings This function enables you to delete the station lists and all custom settings. 2 Activate the menu item »Settings« with »oK«. 3 Select the menu item »Timer Apps« with »>« or »<« and press »oK« to confirm. – »Timer Applications« menu is displayed. 1 From the »About« menu use »V« or »Λ« to select the line »Restore Factory Defaults« and press »oK« to confirm.
CONVENIENCE FUNCTIONS-----------------------------------------------------------2 Select the line »Mode« with »V« or »Λ« and use »<« or »>« to select when the television should switch on. 3 Select the line »Input Source« with »V« or »Λ« and use »<« or »>« to select the input source. 4 Select the line »Service Type« with »V« or »Λ« and use »<« or »>« to select the preferred option (ATV, DTV, Radio or DATA). 5 Select the line »Channel« with »V« or »Λ« and use »<« or »>« to select the preferred channel.
ConVenIenCefUnCTIons-----------------------------------------------------------6 Press »baCK <« to go back one menu level or press »eXIT« to end the setting. note: If the option »Auto« is selected in the line »Time Adjustment«, the television set automatically adapts the time to the time signal from the respective broadcaster. However, different channels may also use time bases which are different to those of your country e.g. foreign broadcasters.
CONVENIENCE FUNCTIONS-----------------------------------------------------------3 Activate (On) or deactivate (Off) the panel lock with »<« or »>«. 4 Press »BACK <« to go back one menu level or press »EXIT« to end the setting. Changing the PIN code Instead of the default code »1234«, you can enter a personal code. Please take note of your personal code. 1 From the »Parental Guidance« menu use »V« or »Λ« to select the line »Change PIN« and press »<« or »>« to confirm.
USING EXTERNAL DEVICES--------------------------------------------------------------DIGI LINK Your television is equipped with DIGI LINK feature. This feature utilizes CEC (Consumer Electronics Control) protocol. CEC allows you to make an HDMI connection between your TV and DVD player, STB or video recorder and control such equipments with the remote control of the television. This feature must also be supported by the device you will connect. You television supports the following functions.
UsInGeXTeRnalDeVICes--------------------------------------------------------------DeviceControl switchingthedevicetostandby You can determine how the remote control of your television will control the external device. This option switches the connected external device to standby. « and use »<« or »>« to select 1 Press » either one from »HDMI1« to »HDMI4« and press »oK« to confirm. « and use »<« or »>« to select 1 Press » either one from »HDMI1« to »HDMI4« and press »oK« to confirm.
UsInGeXTeRnalDeVICes--------------------------------------------------------------Highdefinition–HDready Your television can playback high-definition television signals (HDTV). You can connect the input sources (HDTV set-top box or High Definition DVD player) to the »HDMI« socket (digital HDTV signal). This ensures that you can view digital HDTV programmes, even if they are copy-protected (HDCP High Bandwidth Digital Content Protection).
USING EXTERNAL DEVICES--------------------------------------------------------------Connecting an external device Using the Euro/AV socket With a digital audio/video signal 7 Suitable devices: Digital satellite receiver, game console, BluRay player, DVD player/ recorder, set-top box, notebook, PC. 7 Video signal: digital image; definition: standard 576p; HDTV 720p, 1080i, 1080p. 7 Audio signal: digital sound (stereo, multichannel compression, uncompressed).
USING EXTERNAL DEVICES--------------------------------------------------------------With S-Video signal Suitable devices: DVD player/recorder, video recorder, camera recorder, notebook, PCs. 7 Video signal: Y/C. 7 Audio signal: stereo, analog. 7 Channel position »S-VIDEO«. 7 1 Connect the »AV1/S-VHS« socket on the television to the corresponding socket on the external device using EURO/AV cable (video and audio signal).
USING EXTERNAL DEVICES--------------------------------------------------------------Apply the device with HDMI ARC function and activate HDMI ARC 1 Switch on the the multi-channel amplifier or the AV receiver. If a Blu-ray Player is connected on the AV receiver, the player must be switched on, too. 2 Open the tools menu with »TOOLS«. 3 Select the line »Digilink« with »V« or »Λ« and press »OK« to confirm.
CablesCReensHaRe(MHl)--------------------------------------------------------- WhatisMHl? 7 7 7 Your television supports MHL connection (Mobile High Definition Connection) thanks to a MHL cable or MHL adapter. MHL connection allows you to share your mobile device screen with television by connecting your mobile device to television by a MHL cable. MHL can only be used from »HDMI1 (MHL)« socket and only with a mobile device that supports MHL feature.
WIRelesssCReensHaRe(lIVesHaRe)--------------------------- WhatislIVesHaRe? 7 Liveshare is a wireless technology featured with Android operating system and used to reflect the screen of your mobile device which supports this feature to your television supporting Liveshare. By using this technology you can share your device’s content, present a slide show or play your favorite game on a larger screen. screensharewithliveshareconnection 1 Open the menu with »MenU«.
PCMonIToRMoDe---------------------------------------------------------------------------------- ConnectingaPC 1 Connect the socket »PC-IN« on the television to the corresponding socket on the PC using a VGA cable. 2 Connect the »Audio« socket on the television to the corresponding socket on the PC using a suitable cable. note: 7 Adjust your PC to the monitor (for example, picture resolution 1280 x 768, picture frequency 60 Hz).
oPeRaTIonWITHCoMMonInTeRfaCe--------------------- Whatiscommoninterface? 7 7 7 7 Common Interface (CI) is an interface for DVB receivers. Encrypted channels can only be viewed with a CA module suitable for the encryption system and the corresponding smart card. The television set is equipped with a Common Interface slot into which CA modules from various providers can be inserted.
sPeCIalseTTInGs---------------------------------------------------------------------------------------searchingforalldigitaltelevisionchannelsfromasatellite automatically New satellite channels are added or satellite data is changed frequently. Therefore, we recommend you to run auto search function from time to time. 8 Select Scan Type.
SPECIAL SETTINGS---------------------------------------------------------------------------------------Searching for digital television channels from a satellite manually If a certain channel cannot be found with automatic search, you can search it manually by manual search function. You must enter all parameters of the channel correctly. You can obtain the current transponder information from teletext page, satellite TV magazines or internet. 1 Open the menu with »MENU«.
SPECIAL SETTINGS---------------------------------------------------------------------------------------» LNB Selection«: If more than one satellites are used in the current SCR system, select »1/2« to»2/2« for the satellite corresponding to the relevant positions using »<« or »>«. – »LNB Power«: Set the LNB power to »Off« or set it to »13/18V« or »14/19V« depending on the LNB type by using »<« or »>«. Notes: Use installation equipment supported / suggested by your SCR Switch.
sPeCIalseTTInGs---------------------------------------------------------------------------------------DiseqC1.2settings Adjust the satellite antenna position according to each satellite. These settings can be stored and the antenna can be moved to a preset position. 1 Select the line »DiSEqC 1.2 SETTINGS« with »V« or »Λ« and press »oK« to confirm. – »DiSEqC 1.2 SETTINGS« menu is displayed. 2 Use »V« or »Λ« to select necessary items.
SPECIAL SETTINGS---------------------------------------------------------------------------------------Note: You can speed up the search. To do this, frequency and network ID information are required. You may get this data from your cable operator or find it in the Internet forums. 7 7 Select the push button »Next Page« with »V« to and press »OK« to confirm. Note: Select whether to search for digital or analogue TV channels.
SPECIAL SETTINGS---------------------------------------------------------------------------------------Searching for digital terrestrial TV channels automatically 1 Open the menu with »MENU«. 2 Activate the menu item »Settings« with »OK«. 3 Select the menu item »Source Setup« with »>« or »<« and press »OK« to confirm. 4 Select the line »Advanced Settings« with »V« or »Λ« and press »OK« to confirm. 5 Select the line »Active Antenna Power« with »V« or »Λ«.
SPECIAL SETTINGS---------------------------------------------------------------------------------------Automatic service update If this function is activated, possible changes of network operators are updated automatically. The unit must be located in stand-by mode. This updating affects all types of reception - terrestrial, cable and satellite. 1 Open the menu with »MENU«. 2 Activate the menu item »Settings« with »OK«. 3 Select the menu item »Source Setup« with »>« or »<« and press »OK« to confirm.
sPeCIalseTTInGs---------------------------------------------------------------------------------------note: The search can be ended prematurely with »eXIT«. 7 8 Press »« (yellow) to switch to the Channel Editor; or press »eXIT« to end the setting. 1 Open the menu with »MenU«. 4 Select the line »Manual Channel Search« with »V« or »Λ« and press »oK« to confirm. 5 Select the option »Air« or »Cable« with »<« or »>« and confirm the source you are receiving analog broadcast from by pressing »oK«.
SPECIAL SETTINGS---------------------------------------------------------------------------------------Deleting channels 1 In the »Channel Editor« menu, select the channel(s) you want to delete with »V«, »Λ«, »<« or »>«, and highlight the television channel by pressing »OK«. –Channel is marked with »✔«. Note: If several TV channels are to be deleted, press »V «, »Λ«, »<« or »>« to select these and mark each one with »OK«. 7 2 Activade the »Tools« menu with »« (yellow).
SPECIAL SETTINGS---------------------------------------------------------------------------------------Displaying signal information Deactivate and activate HbbTV (only for digital television channels) This option allows turning off Hbb TV feature, thus warnings shall not be displayed on channels with Hbb TV feature. 1 Open the menu with »MENU«. 2 Activate the menu item »Settings« with »OK«. 3 Select the menu item »Source Setup« with »>« or »<« and press »OK« to confirm.
INFORMATION-------------------------------------------------------------------------------------------------GRUNDIG 32 VLE 7421 BL Product Fiche Energy efficiency class A+ Screen size: 80 cm/32 Zoll Power consumption: in operation mode 32 W / 80 W max. in off position 0 W Annual power consumption: 47 kWh Stand-by power consumption: < 0.50 W Max.
INFORMATION-------------------------------------------------------------------------------------------------Service information for dealers For the customers in Italy; This product complies with European Union directives and regulations below: 2006/95/EC: Electrical equipment directive for use within certain voltage limits. 2004/108/EC: Directive relevant for electromagnetic suitability.
INFORMATION-------------------------------------------------------------------------------------------------Network interfaces This product is intended for connection to the ADSL network. Disposing of the packaging The packing materials are dangerous for children. Keep the packing materials out of the reach of children. The packing of your product is manufactured from recyclable materials. Dispose by classifying in accordance with waste instructions. Do not dispose along with normal household waste.
INFORMATION-------------------------------------------------------------------------------------------------Troubleshooting If the remedies given below do not work, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers.
INFORMATION-------------------------------------------------------------------------------------------------Low image quality (pixel) in WLAN mode DMS (for example PC) is connected to the wireless network and away from the modem Bring your DMS closer to the modem Warnings about the connection problems on the display Network Cable or wireless USB network device may be disconnected Check network cable or wireless USB network device Modem do not have Internet connection or has problems Make sure that yo