User guide
ENGLISH
34
NETWORK SETUP
-------------------------------------------------------------------------------------------
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Adress«, »Netmask«, »Gateway« and
»DNS« values (IPS) from your Internet Service
Provider.
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Network Configura-
tion« with »
>
« or »
<
« and press »OK« to
confirm.
– »Network configuration« menu is dis-
played.
4 Select the line »Change Connection Type«
»
V
« or »
Λ
« and press »OK« to confirm.
5 Select the option »Wired« with »
<
« or »
>
«
and press »OK« to confirm.
6 Select the line »Network Configuration«
with »
V
« or »
Λ
« sand use »
<
« or »
>
« to
select »Manual«.
7 Select the line »Advanced« with »
V
« or
»
Λ
« and press »OK« to confirm.
– »IP Address«, »DNS«, »Netmask« and
»Gateway« options are active.
Network Configuration
Timer Applications TV Settings
Back
Exit
Connect
Test Connection
Change Area
Change Connection Type Wired
Network Configuration Manual
IP Address 192.168.000.164
DNS 192.168.000.001
Netmask 255.255.254.000
Gateway 192.168.000.001
8 Select the line »IP Address« with »
V
«.
Enter IP address with »1…0«.
9 Select the line »DNS« with »
V
«.
Enter IP address with »1…0«.
10 Select the line »Netmask« with »
V
«
Enter Netmask address with »1…0«.
11 Select the line »Gateway« with »
V
«.
Enter Gateway address with »1…0«.
12 With »
« (red) select »Connect« option to
establish modem connection.
– »Connecting... Please wait« message will
be displayed, and if the connection is
successful, Connection to Gateway: Suc-
cessful« message will be displayed.
13 Press »
« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success-
ful« message will be displayed.
14 Press »EXIT« to end the settings.