User guide

ENGLISH
78
Apply the device with HDMI ARC
function and activate HDMI ARC
1 Switch on the the multi-channel amplifier or
the AV receiver. If a Blu-ray Player is con-
nected on the AV receiver, the player must
be switched on, too.
2 Open the tools menu with »TOOLS«.
3 Select the line »Digilink« with »
V « or » Λ «
and press »OK« to confirm.
– Audio device connected to the »HDMI4
(ARC)« source in the »Device List« menu
shall be displayed in the list.
4 Start device search with »

« (blue).
– Audio device connected to the »HDMI4
(ARC)« source shall be displayed in the
list.
5 Select the device with »
V « or » Λ « and
press »OK« to confirm.
Note:
7
If the audio system also has a playing func-
tion (e.g. Home theater system including
DVD player function), two devices will be
listed on the HDMI CEC list. The first one is
the player, and the second one is the audio
playback.
7
If a Blu-ray Player is connected to the AV
receiver, please remove the Disc from the
Player during the registration.
6 Open the menu with »MENU«.
7 Activate the menu item »Settings« with
»OK«.
8 Select the menu item »Sound Settings« with
»
>
« or »
<
« and press »OK« to confirm.
– »Sound Settings« menu is displayed.
9 Select the line »Advanced« with »
V « or
»
Λ « and press »OK« to confirm.
10 Select the line »ARC« with »
V « or » Λ «.
11 Press »
<
« or »
>
« to select »On«.
USING EXTERNAL DEVICES
---------------------------------------------------------------
Notes:
7
The internal speakers of the television are
switching off automaticaly.
7
The volume of the AV receiver you can adjust
with the remote control of the television.
7
For switching off the HDMI ARC function se-
lect »Off« with »
<
« or »
>
«.
7
The ARC function will be deactivated while
switching off the television and the internal
speakers are active again.
12 Press »EXIT« to end the setting.
Playing the audio signal via the HiFi
system
1 Connect the socket »U« on the television
and the corresponding socket on the hi-fi
system / AV receiver using a adapter cable.
Note:
7
When this function is activated, the hi-fi sys-
tem / AV receiver (connected to socket »
U«)
transmits the audio signal.
2 Open the menu with »MENU«.
3 Activate the menu item »Settings« with
»OK«.
4 Select the menu item »Sound Settings« with
»
>
« or »
<
« and press »OK« to confirm.
– »Sound Settings« menu is displayed.
5 Select the line »Advanced« with »
V « or
»
Λ « and press »OK« to confirm.
6 Select the line »Audio Out« with »
V « or
»
Λ «.
7 Select the option »Fixed« or »Adjustable«
with »
<
« or »
>
«.
Notes:
7
If you select »Adjustable«, the volume can
be changed in the menu option » Audio Out
Volume«.
7
If you want to obtain the audio output only
from hi-fi system / AV receiver, select the op-
tion »Off« in the line »TV Speaker with »
<
«
or »
>
«
8 Press »EXIT« to end the setting.
Manufactured under license from Dolby Laboratories.
Dolby and double D symbols are trademarks of Dolby
Laboratories.