Operation Manual

21
ENGLISH
INITIAL SET-UP
---------------------------------------------------------------------------------------------------
Searching television channels with sat-
ellite signal (DVB-S)
25 Select the option »Satellite (DVB-S/S2)«
with »
V « or » Λ « and press »OK« to
confirm.
– The satellite Astra 19.2° East is preset.
26 Confirm the push button »Continue« with
»

« (blue).
Notes:
7
Select the Channel Type.
Press »
V « or » Λ « to select whether you
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (Digital + Radio) and press »OK« to
select and mark or unmark the »Digital«
and/or »Radio« items.
7
Select Scan Mode.
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press »
V « or » Λ « and press »OK« to
select and mark or unmark the »Free« and/
or »Scrambled« items.
27 Press »

« (red) to start searching.
– »Digital Searching« menu appears and
the scan for TV channels begins.
– The scan is complete as soon as the mes-
sage »Search is completed!« appears.
28 Select the »Channel Editor« with »OK«.
Tuning cable digital television channels
(DVB-C)
29 Select the option »Cable (DVB-C)« with
»
V « or » Λ « and press »OK« to confirm.
30 Select the line »Scan Type« with »
V « or
»
Λ «.
Select the option »Quick« or »Full« with »
<
«
or »
>
«.
– »Quick« scanning function sets the chan-
nels according to the cable operator
information in the broadcasting signal.
– »Full« scan function scans the entire fre-
quency range selected. With this search
option, search can take a long time. This
search type is recommended. Some cable
providers do not support »Quick« scan.
Note:
7
You can speed up the search. To do this,
frequency and network ID information are
required. You may get this data from your
cable operator or find it in the Internet
forums.
31 Confirm the push button »Continue« with
»

« (blue).
Note:
7
Perform Channel Type selection. Press
»
V « or » Λ « to select whether you want to
search for only digital channels (Digital),
only Analog channels (Analog) or both
(Digital + Analog) and press »OK« to se-
lect and mark or unmark the »Digital« and
»Analog« items.
32 Press »

« (red) to start searching.
– The »Digital or Analog Searching« menu
appears, and the search for TV channels
begins.
– The scan is complete as soon as the
»Search is completed!« appears.
33 Select the »Channel Editor« with »OK«.