Operation Manual

27
ENGLISH
PICTURE /SOUND SETTINGS
-----------------------------------------------------------
Picture settings
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
V «, » Λ «,
»
<
« or »
>
« and press »OK« to confirm.
3 Select menu item »Picture« with »
<
« or »
>
«
and press »
V « to confirm.
– »Picture Settings« menu is active.
Picture Format 16:9
Picture Mode Natural
Backlight Ec0
Advanced
Restore default display settings
Picture
Tuesday
xx xxx xxxx
Source TimerSound NetworkTV Parental
Settings > Picture
Change Area Select ExitBack
BACK EXIT
4 Select the required line »Picture Format«,
»Picture Mode« or »Backlight« with »
V « or
»
Λ « and press »OK« to confirm.
Select the option with »
<
« or »
>
«.
Press »BACK
<
« to return to »Picture«
menu.
Note:
7
Other settings are available under »Ad-
vanced«.
5 Select the line »Advanced« with »
V « or
»
Λ « and press »OK« to confirm.
6 Select the required line/function with »
V «
or »
Λ « and press »OK« to confirm.
Select the value/option with »
<
« or »
>
«
and press »OK« to confirm.
Press »BACK
<
« to return to »Picture«
menu.
7 Press »EXIT« to end the setting.
Advanced picture settings
The “advanced picture settings” are in principal
digital image improvements which, however,
should be only used when necessary when pic-
ture quality and transmission is excellent. They
may well improve the display with poor mate-
rial, but may adversely affect the display where
transmission and picture quality are excellent.
7
»Backlight« – Manual setting for back light-
ing (only active if dynamic back lighting is
switched to “OFF”). This setting also directly
impacts power consumption.
7
»Vibrant Colour« – Increases the colour
contrast and the contrast adjustment. This
setting is mostly too strong for use with nor-
mal pictures and should only be used where
necessary (low or off) otherwise nuances in
the image can be suppressed.
7
»Gamma« – This setting establishes which
brightness value should be displayed for
which digital transmission value. Most
recordings are transmitted with a gamma
value of 2.2 (all Windows PCs and newer
PCs with a MAC operating system work
with this, older MAC systems and transmis-
sions without colour profile mostly operate
with a gamma value of 1.8).
7
»Dynamic Contrast« – The function dynami-
cally and optimally adjusts the contrast for
the respective picture content by analysing
images and then altering this depending in
a change in contrast. This increase the con-
tract, however may also reduce the visible
brightness levels in the picture.
7
»Film mode« detects and processes feature
films automatically for all channel sources.
This means you will always receive an
optimal picture.
This functions in the modi 480i, 576i and
1080i in TV playback and for other chan-
nel sources.
If the »Film mode« is switched on for
programmes without a feature film signal,
minor problems such as picture freeze,
defective subtitles or fine lines in the picture
could occur.