Operation Manual

ENGLISH
54
ADVANCED SETTINGS
------------------------------------------------------------------------------
1 Open menu with »MENU« button.
2 Select menu item »Settings« with »
V «, » Λ «,
»
<
« or »
>
« and press »OK« to confirm.
3 Select menu item »TV« with »
<
« or »
>
« and
press »
V « to confirm.
– »TV« menu is active.
4 Select the line »Advanced« with »
V « or
»
Λ « and press »OK« to confirm.
Auto Sleep 4 Hours
Show Logo Display No
Power LED Backlight Medium
Power Saving Mode Off
Permanent Timeshift Off
Picture
Tuesday
xx xxx xxxx
Source TimerSound NetworkTV Parental
Settings > TV > Advanced
Change Area ExitBack
BACK EXIT
Change Mode
Note:
7
Additional operations are explained in the
following sections.
Auto sleep
This function will turn the television to stand-by
mode in 4 hours depending on your setup, un-
less the television receives any signal, or keys or,
according to European regulations, the remote
remains untouched for 5 minutes.
1 From the »Advanced« menu use »
V « or
»
Λ « to select the line »Auto Sleep«.
2 Select the switch-off time with »
<
« or »
>
«.
Note:
7
Set the function to »Off« with »
<
« or »
>
« to
switch off.
3 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.
Store logo view
This function is intended for feature introduction
at stores. When »On« is selected, feature logos
are displayed.
1 From the »Advanced« menu use »
V « or
»
Λ « to select the line »Shop Logo Display«.
2 Select »Yes« with »
<
« or »
>
«.
Note:
7
Set the function to »No« with »
<
« or »
>
« to
switch off.
3 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.
Power LED brightness
You can adjust power (stand-by) LED brightness
in operation mode of television.
1 From the »Advanced« menu use »
V « or
»
Λ « to select the line »Power LED Bright-
ness«.
2 Use »
<
« or »
>
« to set the brightness to
»High«, »Medium« or »Low«.
3 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.