Operation Manual

ENGLISH
62
SOFTWARE OF THE DEVICE
---------------------------------------------------------------
1 Open menu with »MENU« button.
2 Select menu item »Settings« with »
V «, » Λ «,
»
<
« or »
>
« and press »OK« to confirm.
3 Select the menu item »TV « with »
>
« or »
<
«
and press »OK« to confirm.
4 Select the line »About« with »
V « or » Λ «
and press »OK« to confirm.
Product Info
TV Name Smart Inter@ctive 4...
Software Updates
Restore Factory Defaults
Reset Chanel History
Country Other
Picture
Tuesday
xx xxx xxxx
Source TimerSound NetworkTV Parental
Settings > TV > Advanced
Change Area Select ExitBack
BACK EXIT
Note:
7
Additional operations are explained in the
following sections.
Product information
1 From the »About« menu use » V « or » Λ «
to select the line »Product Info« and press
»OK« to confirm.
– Software version information of the pro-
duct is displayed.
2 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.
Software update (OAD)
(only for digital television channels)
1 From the »About« menu use »
V « or » Λ «
to select the line »Software Updates« and
press »OK« to confirm.
2 Select the option »OAD« with »
V « or » Λ «
and press »OK« to confirm.
– The search for new software is being car-
ried out.
Note:
7
If no new software is available the menu
automatically switches off.
3 If new software is available, press »

«
(green) to install the software.
– The new software will be loaded.
Warning:
7
Television will restart after update. Do
not turn your television’s power off during
updates.
Note:
7
For automatic checking of software update,
select from »Source« menu ➡ »Advanced«
the line »OAD« with »
V « or » Λ «. Use »
<
«
or »
>
« to select »On«.
Software update (Internet)
(only for digital television channels)
1 From the »About« menu use »
V « or » Λ «
to select the line »Software Updates« and
press »OK« to confirm.
2 Select the option »Internet« with »
V « or
»
Λ « and press »OK« to confirm.
– The search for new software is being car-
ried out.
Note:
7
If no new software is available the menu
automatically switches off.
3 If new software is available, press »

«
(green) to install the software.
– The new software will be loaded.
Warning:
7
Television will restart after update. Do
not turn your television’s power off during
updates.
Software update (USB)
1 Plug the memory stick in one of the USB
sockets at the side of the television.
2 From the »About« menu use »
V « or » Λ «
to select the line »Software Updates« and
press »OK« to confirm.
3 Select the option »USB« with »
V « or » Λ «
and press »OK« to confirm.
– The software on the USB memory stick is
installed.