Operation Manual

ENGLISH
88
SETTING FURTHER CHANNELS
-----------------------------------------------------
Motor antenna setup (DiSEqC 1.2)
Note:
7
The following description about the LNB set-
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
Your television supports DiSEqC 1.2 motorized
satellite systems. This feature allows to control
the satellite through your television.
Adjust the satellite antenna position according
to each satellite. These settings can be stored
and the antenna can be moved to a preset
position.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
V «, » Λ «,
»
<
« or »
>
« and press »OK« to confirm.
3 Select the menu item »Source« with »
>
« or
»
<
« and press » V « to confirm.
– »Source« menu is active.
4 Select the line »Manual Channel Search«
with »
V « or » Λ « and press »OK« to
confirm.
5 Select the option »Satellite (DVB-S/S2)«
with »
V « or » Λ « and press »OK« to
confirm.
6 Activate the option »Antenna Settings« with
»

« (blue).
– The »Antenna Settings« menu is dis-
played.
7 Select the line »DiSEqC Mode« with »
V «
or »
Λ « and select »DiSEqC1.2« with »
<
«
or »
>
«.
– The line »DiSEqC 1.2 SETTINGS« is ac-
tive.
8 Select the line »DiSEqC 1.2 SETTINGS«
with »
V « or » Λ « and press »OK« to
confirm.
– »DiSEqC 1.2 SETTINGS« menu is dis-
played.
9 Use »
V « or » Λ « to select necessary items.
Moving Mode
Set the Moving Mode with »
<
« or »
>
« to
»Discrete« or »Continuous«.
– »Discrete«: Moves the antenna to west or
east for the determined step size.
– »Continuous«: Moves the antenna to west
or east continuously.
Step Size
With »
<
« or »
>
« select the number of steps
the antenna has to rotate. »Step Size« is
active when »Moving Mode« is selected as
»Discrete«.
Move Motor
Adjusts the antenna for the selected satellite.
Set the antenna to »West« with »
<
« and to
»East« with »
>
«.
– »Go To Stored Position«: Moves the
antenna to the preset satellite position.
Maximum 50 positions can be saved.
Select the setting with »

« (green) button,
select predefined position with »
<
« or
»
>
« and confirm with »

« (green) button.
Antenna will mode to saved position.
– »Store Position«: Stores antenna's current
position. Select setting with »

« (red) but-
ton, select recording position with »
<
« or
»
>
« and confirm with »

« (green) button.
Limit Position
– Sets the limit position which the antenna
will be able to move and allows the
antenna to move within the determined
limits. With »
<
« specify a limit position in
»West« direction and with »
>
« specify a
limit position in »East« direction.
Reset DiSEqC 1.2 Limit
– Resets the limit positions set for the an-
tenna.
10 Press »EXIT« to end the setting.