Operation Manual

ENGLISH
94
SETTING FURTHER CHANNELS
-----------------------------------------------------
Changing stored analogue
channels
If channels were stored with the automatic chan-
nel search during the tuning of the television
channels, you can delete them. You can also
change or enter the name of a channel and skip
a channel.
Selecting channel lists
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
V «, » Λ «,
»
<
« or »
>
« and press »OK« to confirm.
3 Select the menu item »Source« with »
>
« or
»
<
« and press » V « to confirm.
– »Source« menu is active.
4 Select the line »Channel Editor« with »
V «
or »
Λ « and press »OK« to confirm.
– »Channel Editor« menu is displayed.
Note:
7
Additional operations are explained in the
following sections.
Deleting channels
1 In the »Channel Editor« menu, select the
channel(s) you want to delete with »
V «,
»
Λ «, »
<
« or »
>
«, and highlight the televi-
sion channel by pressing »OK«.
–Channel is marked with »✔«.
Note:
7
If several TV channels are to be deleted,
press »
V «, » Λ «, »
<
« or »
>
« to select
these and mark each one with »OK«.
2 Activade the »Tools« menu with »

« (yel-
low).
3 Select the line »Delete« with »
V « or » Λ «
and press »OK« to confirm.
4 To confirm deletion process, select the op-
tion »OK« with »
<
« or »
>
« and press »OK«
to confirm;
or
to cancel deletion process, select the option
»No« with »
<
« or »
>
« and press »OK« to
confirm.
5 Press »EXIT« to close the menu.
Entering the analog channel names
(maximum 8 characters)
1 In the »Channel Editor« menu, select the
channel you want to rename with »
V «,
»
Λ «, »
<
« or »
>
«, and highlight it by press-
ing »OK«.
– Channel is marked with »✔«.
2 Activade the »Tools« menu with »

« (yel-
low).
3 Select the line »Rename« with »
V « or » Λ «
and press »OK« to confirm.
4 Delete the current channel name step-by-
step with »

« (red).
5 Select the required character with »
V «,
»
Λ «, »
<
« or »
>
« and move to the next
character with »OK«.
– Using »Shift« ➡ »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
6 Confirm the channel name with »

«
(green).
Note:
7
To enter other channel names, repeat steps
1 to 6.