Operation Manual

23
ENGLISH
INITIAL SET-UP
---------------------------------------------------------------------------------------------------
Tuning terrestrial digital television
channels (DVB-T)
Note:
7
No additional setting is necessary for the
“second tuner”.
35 Select the option »Air (DVB-T/T2)« with
»
V « or » Λ « and press »OK« to confirm.
Important:
7
The antenna power supply (5V ) may
only be switched on if the antenna is an
active indoor antenna with a signal
amplifier and it is not already supplied with
a voltage via a mains plug (or similar
supply). Otherwise you may cause a short
circuit and irreparably damage your
antenna.
36 Select the line »Active Antenna Power« with
»
V « or » Λ «.
Switch on the antenna power supply for the
antenna with »
<
« or »
>
« (»On«).
37 Select the line »Next Page« with »
V « or
»
Λ « and press »OK« to confirm.
Note:
7
Perform Channel Type selection. Press
»
V « or » Λ « to select whether you want to
search for only digital channels (Digital),
only Analog channels (Analog) or both
(Digital + Analog) and press »OK« to se-
lect and mark or unmark the »Digital« and
»Analog« items.
38 Press »

« (red) to start searching.
– The »Digital or Analog Searching« menu
appears, and the search for TV channels
begins.
– The scan is complete as soon as the
»Search is completed!« appears.
39 Select the »Channel Editor« with »OK«.