40 GUS 8675 EN
TABLE OF CONTENTS--------------------------------------------------------------------------------5 SET-UP AND SAFETY 7 7 8 8 8 8 GENERAL INFORMATION Special features of your television set Receiving digital stations GRUNDIG SCR System Important notes on environmental protection Notes on still images 9 9 9 PACKING CONTENTS Standart accessory Optional accessory 10 10 11 12 CONNECTION/PREPARATION Connecting the antenna and power corda Setting up or hanging Inserting batteries in the remote control 13
TABLE OF CONTENTS--------------------------------------------------------------------------------42 42 42 43 44 45 46 46 46 47 48 48 49 49 50 50 51 51 52 52 53 54 56 56 57 57 58 58 58 58 60 60 60 61 61 USB RECORDING Information on recording and playing television programmes Possible limitations when using an external data medium Connecting external data media USB recording settings Time shift – ″ Pausing” programmes Recording TV programmes One-touch programme recording Recording a programme from the channe
TABLE OF CONTENTS--------------------------------------------------------------------------------75 75 75 76 77 77 78 79 79 80 81 82 83 84 84 84 84 85 85 85 86 88 88 92 93 USING EXTERNAL DEVICES DIGI LINK The Digi Link functions of the television Device Control High definition – HD ready Connection options Connecting an external device Using a DVD recorder, DVD player, video recorder or set-top box Headphones Hi-fi system Playing the audio signal via the HiFi system Cable screen share (MHL) Wireless screen
SET-UP AND SAFETY- ---------------------------------------------------------------------------------About your TV set With your TV set, you can receive and watch digital TV programmes over DVB-S, DVB-T and DVB-C, along with analogue TV. 7 Many features of the TV set require an Internet connection. The TV set is equipped with WLAN and a LAN port. 7 The TV set can record programmes. For this feature you need a USB storage device, such as an external hard drive (not included).
SET-UP AND SAFETY- ---------------------------------------------------------------------------------WARNING Injuries caused by falling TV set Never place the TV set on an unstable surface. The TV set may fall, causing serious injury, possibly leading to death in isolated cases. Observe the following precautions: 7 Only use the manufacturer’s recommended cabinets or stands. 7 Only use furniture that can safely support the TV set.
GENERAL INFORMATION------------------------------------------------------------------Special features of your television set Your television set enables you to receive and watch digital stations (via DVB-S, DVB-T and DVB-C), including the High Definition (HD) ones. At present, reception for these digital television stations in High Definition is only possible in some countries in Europe.
GENERAL INFORMATION------------------------------------------------------------------Receiving digital stations To receive digital satellite stations (DVB-S) you need a satellite antenna. 7 To receive digital stations (DVB-T) you need a digital rooftop or indoor antenna (passive or active indoor antenna with its own power supply). 7 The antenna cable of the cable TV network that broadcast in DVB-C must be plugged into TV in order to receive the DVB-C broadcasts.
PACKINGCONTENTS------------------------------------------------------------------------------1 3 2 4 5 6 Standartaccessory Optionalaccessory 1 TV Easy-Use Remote Control Batteries for Easy-Use remote controls Cleaning cloth 2 Stand 3 Remote control 4 Batteries for remote controls 5 Screws and mounting instructions for stand 6 Brief Instruction ENGLISH 9
CONNECTION/PREPARATION-----------------------------------------------------Connecting the antenna and power corda SERVICE AV/ S-VHS 3 1b Optic Out LAN USB3 HDMI3 1a HDMI4 (ARC) SATELLITE (MAIN) 13/18V max.500mA (SUB) ANT-IN 5 V max.
CONNECTION/PREPARATION-----------------------------------------------------Setting up or hanging Select a location so that no direct sunlight falls on the screen. 7 Setting up with stand 7 To mount the stand, refer to the installation instructions included. 7 Place the television set on a hard, level surface. Preparing for mounting on the VESA bracket You will need: 7 A pair of scissors, 7 A crosstip screwdriver. Follow the installation instructions for the VESA bracket.
CONNECTION/PREPARATION-----------------------------------------------------Inserting batteries in the remote control 1 Open the battery compartment by removing the lid. 2 I nsert the batteries (2 x 1.5 V micro; for example R03 or AAA). Observe the polarity (marked on the base of the battery compartment). 3 Close the battery compartment. Note: 7 If the television set no longer reacts properly to remote control commands, the batteries may be flat.
OVERVIEW-------------------------------------------------------------------------------------------------------------- CI Connectionsonthetelevisionset SERVICE AV / S-VHS AV/ S-VHS SERVICE Optic Out Optic Out LAN USB3 LAN USB3 HDMI3 HDMI3 HDMI4 (ARC) SATELLITE (MAIN) 13/18V max.500mA (SUB) ANT-IN 5 V max.50mA HDMI4 (ARC) SATELLITE 13/18V max.500mA (MAIN) ANT-IN 5V max.
OVERVIEW--------------------------------------------------------------------------------------------------------------SCART / S-VHS / COMPONENT USB2 SB socket for external U data medium and PVR function; connection for wireless keyboard, mouse. HDMI1 (MHL) DMI socket, audio/video H signal input (HDMI). HDMI2 DMI socket, audio/video H signal input (HDMI). Euro/AV socket (CVBS signal, RGB signal); v ideo signal input for S-Video camera (with ScartS-VHS converter).
OVERVIEW-------------------------------------------------------------------------------------------------------------ControlbuttonsontheTV O/I P ower switch, switches the television into standby mode and off. Note: There shall not be any obstacle around Power switch and shall remain readiliy operable. 7 Multi-functionswitch AV/ S-VHS SERVICE Optic Out LAN USB3 HDMI3 HDMI4 (ARC) SATELLITE (MAIN) 13/18V max.500mA (SUB) ANT-IN 5 V max.
OVERVIEW--------------------------------------------------------------------------------------------------------------Remote control - main functions Switches on from standby mode; selects channels directly. Selects the channel list (»ALL«, »FAV 1« to »FAV 4«). Opens the electronic TV guide. Displays information. Opens the menu. Opens the channel list. Opens the Tools menu. Turns on and off the television set (stand-by). witches between teletext S and TV modes.
OVERVIEW--------------------------------------------------------------------------------------------------------------Remote control - all functions Selects a page in teletext mode; (red) (green) selects/activates various functions (yellow) in menus. (blue) 5 Switches to double character size in teletext mode; selects the previous track/previous picture in the Media Player. 6 pdates a page in teletext mode; U selects the next track/next picture in the Media Player.
INITIAL SET-UP---------------------------------------------------------------------------------------------------The television set is fitted with an “installation assistant”, which guides you step by step through the basic settings. Using the screen dialogue, the user guide enables supposedly complex settings and data entries to be presented simply and clearly for everybody. Pages and dialogue items appear on the screen, which identify the subsequent and likely operating steps.
INITIAL SET-UP---------------------------------------------------------------------------------------------------Initial set-up – overview Select language (page 20, step 3) Select country (page 20, step 5) Select mode (page 20, step 6) Select location and accessories (page 20, step 7 - 10) Network setup (page 21, step 12) Wired (page 21, step 12) Wireless (page 21, step 17) Wireless WPS (chapter page 89) Auto (page 21, step 12) Auto (page 21, step 17) Button (Chapter page 89) Manually (chapter page 8
INITIAL SET-UP---------------------------------------------------------------------------------------------------Arrange Initial set-up 1 Switch the television set to standby with the power switch »O/I«. 2 Switch on the television set from standby with »8«, »1…0«, »P+« or »P–«. – Menu Language menu appears when the device is switched on for the first time.
INITIAL SET-UP---------------------------------------------------------------------------------------------------Connecting to a home network with a LAN cable 12 Confirm »Change Connection Type« with »OK«. 13 Select the option »Wired« with »V« or »Λ« and press »OK« to confirm. Note: 7 The settings for a manual LAN connection are on page 87. 14 Press »« (red) to select »Connect« option to establish modem connection. – »Connecting ...
INITIAL SET-UP---------------------------------------------------------------------------------------------------Searching television channels with satellite signal (DVB-S) 26 Select the option »Satellite (DVB-S/S2)« with »V« or »Λ« and press »OK« to confirm. – The satellite Astra 19.2° East is preset. 27 Confirm the push button »Continue« with »« (blue). Notes: 7 Select the Channel Type.
INITIAL SET-UP---------------------------------------------------------------------------------------------------Tuning terrestrial digital television channels (DVB-T) Note: 7 No additional setting is necessary for the “second tuner”. 35 Select the option »Air (DVB-T/T2)« with »V« or »Λ« and press »OK« to confirm.
INITIALSET-UP--------------------------------------------------------------------------------------------------ChangingtheChannelEditorfor thedigitalchannels peningtheProgrammeTable O 1 Open the menu with »MENU«. Channels found at the end of the search are stored in the »Channel Editor«. You can delete channels which are not required from the programe table, you can change the order of channels within the programe table and lock individual channels (Parental control).
INITIAL SET-UP---------------------------------------------------------------------------------------------------Searching channels by name in the Channel Editor While arranging the channels in the Channel Editor, you can search and select the channel name by the first three characters. 1 In the »Channel Editor« menu, select the search mode by pressing »« (red). 2 Select the first character of the channel name you want to search with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
INITIAL SET-UP---------------------------------------------------------------------------------------------------Sequencing channels in the Channel Editor You can sequence the channels in the Channel Editor according to different criteria such as TV, radio or scrambled / unscrambled. 1 To sequence the channels according to different criteria in the »Channel Editor« menu, press »« (yellow). 2 Select the sequencing criteria you want with »V« or »Λ« and press »OK« to confirm.
INITIAL SET-UP---------------------------------------------------------------------------------------------------Enter own names for the favourites lists (max. 6 characters) You can rename all favorites lists. 1 To recall favorites list menu when no menu is opened on the screen, press »FAV«. 2 Select the favorites list you want to rename with »V« or »Λ« and press »« (blue) button. – Virtual keyboard will be displayed. 3 To delete the current name step by step, press »« (red).
PICTURE /SOUND SETTINGS----------------------------------------------------------Picture settings 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select menu item »Picture« with »<« or »>« and press »V« to confirm. – »Picture Settings« menu is active.
PICTURE /SOUND SETTINGS----------------------------------------------------------»Perfect Clear« – Improves the general image by means of a gentle blue hue (giving the appearance of greater sharpness) and improves the black level by setting this entirely to black from specific shade of back. This reduces the visible grey values in the dark areas of the picture. 7 »Film mode« detects and processes feature films automatically for all channel sources. This means you will always receive an optimal picture.
PICTURE /SOUND SETTINGS----------------------------------------------------------Sound settings 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select menu item »Sound« with »<« or »>« and press »V« to confirm. – »Sound« menu is active.
PICTURE /SOUND SETTINGS----------------------------------------------------------Note: 7 To log out the subwoofer, select the »Bluetooth device« item with »V« or »Λ« and press »OK« to confirm. Log out the subwoofer with »« (red). 4 End settings with »EXIT«. Location selection The function how to place the television set is important for the automatic audio settings. 1 Select the line »Advanced« from the Sound menu with »V« or »Λ« and press »OK« to confirm. 2 Select the line »TV Location« with »V« or »Λ«.
TV OPERATION – BASIC FUNCTIONS---------------------------------Switching on and off Selecting stations from lists 1 Switch the television to standby with the power switch »ON • OFF«. You can select stations from various lists, (e.g. ALL, FAV1 - FAV4). 1 Press »FAV« to recall the favorite list menu. – »Favorite« menu is displayed. 2 Press »8«, »1…0« or »P+« or »P-« to switch on the television from standby mode. 3 Press »8« to switch the television to standby.
TV OPERATION – BASIC FUNCTIONS---------------------------------Audio language You can select various languages when watching digital channels. This depends on the programme being broadcast. 1 Press » « to open the selection menu. 2 Select the language with »V« or »Λ« and press »OK« to confirm. 3 Press »EXIT« to end the settings. Subtitles You can select various subtitles when watching digital channels. This depends on the programme being broadcast. 1 Press » « to open the selection menu.
TV OPERATION – ADDITIONAL FUNCTIONS------------You can find the following settings in the »Tools« menu. Sleep timer In the »Sleep Timer« menu you can enter a time for the television to switch off. After this time has elapsed, the television switches to standby mode. 1 Open the Tools menu with »TOOLS«. 2 Select the line »Sleep Timer« with »V« or »Λ«. 3 Select the switch-off time with »<« or »>«. Note: 7 Set the function to »Off« with »<« or »>« to switch it off. 4 Press »EXIT« to end the settings.
TV OPERATION – ADDITIONAL FUNCTIONS------------»Subtitle« format If you cannot read the subtitles which appear on the bottom of the screen, then select »Subtitle«. »Panorama« format This setting is suited to films with a large width/ height ratio. During programmes in 4:3 format the picture is stretched horizontally if the »Panorama« function is selected. The picture geometry is stretched horizontally.
ELECTRONIC TV GUIDE---------------------------------------------------------------------------The Electronic TV guide (RoviGuideTM) has two operation modes: online and offline. In the offline mode, you can only see channel data which the station provider has made available. A lot of content can be received via the Internet connection in the online mode such as, programme information, channel logos, information about players, pictures, fragments, etc. 3 Select the channel with »V« or »Λ«.
ELECTRONIC TV GUIDE---------------------------------------------------------------------------The Electronic TV guide in Online mode In the online mode, two other search criteria are available as well as a range of information. You can search for different topics using »Browse«. Use the »Search« function to enter a search item and suggestions will appear on the right side of the screen. Note: 7 The basic functions are the same as in the “Offline mode”. 1 Press »GUIDE« to start Electronic TV guide.
ELECTRONIC TV GUIDE---------------------------------------------------------------------------Creating your own profile Data collection You can create your own profile. Profiles allow you to use the channel guide according to your individual recommendations and search results. You can also create a profile for children and block access to any content for adults. 1 To switch to the overview, press »<«, then press »V« to select »Settings« and confirm with »OK«.
HBBTV MODE-----------------------------------------------------------------------------------------------------What is HbbTV? HbbTV provides next generation interactive teletext broadcast with its modern structure, content and high definition (HD) image and videos. To receive HbbTV broadcast, your television must be connected to the Internet. This feature is only available in countries where the service is provided. After you switch to a TV station that offers HbbTV, a corresponding message appears.
HBBTV MODE-----------------------------------------------------------------------------------------------------Using HbbTV Deactivate and activate HbbTV When you switch to a TV program that supports HbbTV, an info message will appear stating that HbbTV broadcast is available. 1 Press »« (red) to open HbbTV. – Information regarding the services will appear on the screen. Additionally, colored buttons necessary for browsing the menus will also appear.
TELETEXT MODE------------------------------------------------------------------------------------------------TOP text or FLOF text mode Additional functions Note: 7 If you only want to use this “normal” video text, disable the digital video text, see page 40. 1 Press »TXT« to switch to the Teletext mode. Skipping the waiting time While a page is being searched for, you can switch to the television channel. 2 You can select teletext pages directly with »1...0« or step by step with »V« or »Λ«.
USBRECORDING------------------------------------------------------------------------------------------I nformationonrecordingand playingtelevisionprogrammes Recording and reproducing programmes, this can only be done with digital television stations (DVB-S, DVB-T and DVB-C). 7 The digital television stations (DVB-S, DVB-T and DVB-C) you are able to record and playback also depend on the broadcasting station.
USBRECORDING------------------------------------------------------------------------------------------Connectingexternaldatamedia Notes: 7 It is advised to put the television on stand-by mode before connecting the Skype camera. 7 Before disconnecting the external data medium, the television must first be switched to standby, otherwise files can be damaged. 7 There are three USB inputs on the television, namely USB1, USB2 and USB3.
USB RECORDING-------------------------------------------------------------------------------------------USB recording settings Selecting external data media If there are more than one external data media connected to the television, then select one of them. Selecting the menu 1 Open the menu with »MENU«. 2 Select the menu item »Records« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. – »Media Player« menu is displayed. 3 Select the line »PVR« with »V« or »Λ« and press »OK« to confirm.
USB RECORDING-------------------------------------------------------------------------------------------Formatting the partition 1 In the »Disk Management« menu select the line »Format Partition« with »V« or »Λ« and press »OK« to confirm. 2 Select push button »Yes« with »<« or »>« to confirm the security query; or select push button »No« with »<« or »>« to to cancel the function. 3 Switch back with »BACK <« press »EXIT« to end the setting.
USB RECORDING-------------------------------------------------------------------------------------------Recording TV programmes You can record TV programmes while simultaneously watching a different TV programme. The data for these programmes is recorded on an external data medium and this archive is administered via the television.
USB RECORDING-------------------------------------------------------------------------------------------Programme setting for recording ... with electronic programme guide Electronic programme guide data can be used for recording. 25 EPG reminder and/or recorder can be set in total. 1 Press »GUIDE« to open the electronic programme guide.
USB RECORDING-------------------------------------------------------------------------------------------... by entering the information manually 25 TV programmes can be preset for the timer recording or as a reminder. 1 Press »GUIDE« to open the electronic programme guide. 2 Press »<« to display the top menu. – »TV Listing« option is marked. 3 Select the line »Set Recording« with »V« or »Λ« and press »OK« to confirm. – »Set Recording« menu is displayed, »Channel« is marked.
USB RECORDING-------------------------------------------------------------------------------------------Playback Either started manually or with the timer function, the recorded programmes are all stored in the external data media. You can display an archive on an external data media from »Records« – »Media Player« menu. Selecting a broadcast from the recorded files list 1 Open the menu with »MENU«. 2 Select the menu item »Records« with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
USB OPERATION--------------------------------------------------------------------------------------------File formats for USB operating Your television can be operated via the USB input with the following file formats: Video data Special codecs for video compression and decompression provide more memory space without compromising the picture quality excessively. Your television plays video files in the formats XVID, H.264/MPEG-4 AVC (L4.1, 4 reference pictures), MPEG-4, MPEG-2, MPEG-1, MJPEG and MOV.
USBOPERATION-------------------------------------------------------------------------------------------Connectingexternaldatamedia SERVICE AV/ S-VHS It is advised to put the television on stand-by mode with »8« before connecting the external data medium. Connect the device and then switch the television on again. Before disconnecting the data medium, the television must first be switched to standby, otherwise files can be damaged.
USB OPERATION--------------------------------------------------------------------------------------------The file browser Settings in the USB setup menu The file browser displays the video, audio and picture data that the external data medium provides. If a data medium contains different file formats, you can deactivate data (Video file, Audio file, Picture file) you do not need for the playback using a filter function. Selecting the menu 1 Open the menu with »MENU«.
USB OPERATION--------------------------------------------------------------------------------------------Selecting the display duration of the slide show 1 Select the line »Slide Show Interval« with »V« or »Λ«. 2 Select the time (3, 5, 10 seconds) with »<« or »>«. 3 Press »EXIT« to end the setting. Subtitle settings If the film has subtitles, you can turn on and off this subtitle, change its size or colour. 1 Use »V« or »Λ« to select »Subtitle Auto Selection«, »Subtitle Size« or »Subtitle Color«.
USB OPERATION--------------------------------------------------------------------------------------------Notes: 7 It is possible that some files that are supported in USB mode do not operate due to some problems that may arise depending on how such files are created (compression) although they contain the supported file extension.
USB OPERATION--------------------------------------------------------------------------------------------Move to desired time (only video files) 1 Press »OK« during playback. 2 Enter the time that you want to move to with »1...0« and confirm with »OK«. Searching forward (only video and audio files) You can select different speeds (2-fold, 4-fold, 8-fold, 16-fold and 32-fold forwards and backwards). 1 During playback you can select playback speed by pressing »3« or »4«. 2 To resume playback press »8«.
MULTIMEDIA SERVER MODE-----------------------------------------------------------Playing the video, music and image files with home network connection Selecting the digital media server With DLNA menu of your television, you can easily access Video, music and photo files on server; and thanks to DMR feature, you can automatically start and stop media playing on devices with DMC feature.
MULTIMEDIA SERVER MODE-----------------------------------------------------------Audio files played through DMS device support following formats that have obtained DLNA certificate: »AAC_ADTS_320«, »LPCM«, »MP3«, »WMABASE« and »WMAFULL«. 7 Image files played through DMS device support following formats that have obtained DLNA certificate: »JPEG_LRG«, »JPEG_MED« and »JPEG_SM«. 7 Playback 1 Select the content folder on DMS device with »V« or »Λ« and press »OK«. – All titles are displayed. to confirm.
SMART INTER@CTIVE TV 4.0+--------------------------------------------------------SMART Inter@ctive TV 4.0+ internet applications Smart Inter@ctive TV 4.0+ interactive applications provide your television with Internet services and pages. These applications are designed according to your television. With SMART Inter@ctive TV 4.0+ feature you can run many local and global internet applications.
SMART INTER@CTIVE TV 4.0+--------------------------------------------------------Selecting internet applications 1 Press »@« to open »My Apps« menu. – SMART inter@ctive TV 4.0+ home page is displayed. SMART Inter@ctive TV 4.0+ All Applications Enter search settings Remarkable abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... Most Popular abc...
SMART INTER@CTIVE TV 4.0+--------------------------------------------------------Smart Inter@ctive TV 4.0+ home page 1 Applications. SMART Inter@ctive TV 4.0+ 2 All Applications. 3 Search bar. 1 Remarkable Enter search settings 3 All Applications 2 4 Exit. abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... abc... Most Popular abc... New Applications abc...
WEBBROWSER------------------------------------------------------------------------------------------------Webbrowsermenu 3 4 5 6 7 8 9 10 11 12 13 14 15 http://www.grundig.de grundig. 2 16 1 Zoom Out Zoom In Page Up Page Down Navigation Process Menu Tool Bar 1 Menu controls. Webbrowserapplications 2 Active tab. Web browser allows you to navigate in the Internet. 1 Open the menu with »MENU«. 3 Previous page. 4 Next page. 5 Refresh. 6 New tab. 7 Address bar.
LANGUAGE SETTINGS----------------------------------------------------------------------------1 Open the menu with »MENU«. Changing the subtitle language 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. (only for digital television channels) You can disable subtitles, select subtitle language and assign a secondary subtitle language. 3 Select menu item »TV« with »<« or »>« and press »V« to confirm. – »TV« menu is active.
ACCESSIBLE FUNCTIONS---------------------------------------------------------------------1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select menu item »TV« with »<« or »>« and press »V« to confirm. – »TV« menu is active. 4 Select the line »Accessibility Settings« with »V« or »Λ« and press »OK« to confirm.
ADVANCED SETTINGS-----------------------------------------------------------------------------1 Open menu with »MENU« button. Store logo view 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. This function is intended for feature introduction at stores. When »On« is selected, feature logos are displayed. 1 From the »Advanced« menu use »V« or »Λ« to select the line »Shop Logo Display«. 4 Select the line »Advanced« with »V« or »Λ« and press »OK« to confirm.
ADVANCED SETTINGS-----------------------------------------------------------------------------Power save mode It ensures automatic shut off of screen in Antenna, Cable, Satellite and radio channels and USB mode when playing audio files. 1 From the »Advanced« menu use »V« or »Λ« to select the line »Power Saving Mode«. 2 P ress »<« or »>« to set shut off time of display as »10 Seconds«, »30 Seconds«, »60 Seconds«. 3 Press »BACK <« to go back one menu level or press »EXIT« to end the setting.
TIMER FUNCTIONS--------------------------------------------------------------------------------------1 Open menu with »MENU« button. On timer (Auto On) 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. In the On Timer menu, you can enter a switch-on time for the television. The television switches on with the preset volume and the desired channel after the set time in stand-by mode has elapsed. 3 Select menu item »Timer« with »<« or »>« and press »V« to confirm.
TIMER FUNCTIONS--------------------------------------------------------------------------------------Off timer (Auto Off) In the »Auto Off« menu, you can enter a switchoff time for the television. The television switches to stand-by after the entered time has elapsed. 1 Select the line »Auto Off« with »V« or »Λ« and press »OK« to confirm. 2 Select the line »Mode« with »V« or »Λ« and use »<« or »>« to select when the television should switch off.
PARENTAL SETTINGS--------------------------------------------------------------------------------1 Open menu with »MENU« button. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select the menu item »Parental« with »>« or »<« and press »OK« to confirm. – »Parental« menu is displayed.
PARENTAL SETTINGS--------------------------------------------------------------------------------Blocking the multifunction switch When the key lock is activated, the multi function switch on the television does not function. Blocking a television channel You can block individual television channels which are not suitable for children using a personal PIN code. 1 From the »Parental« menu use »V« or »Λ« to select the line »Keypad Lock« and press »<« or »>« to confirm. 1 Open menu with »MENU« button.
PARENTAL SETTINGS--------------------------------------------------------------------------------Watching a blocked television channel You can watch a TV channel blocked with PIN code by selecting the TV channel and entering the PIN code. 1 Select the blocked channel with »1…0« or »P+«, »P–«. 2 Enter the PIN code »1234« with »1...0« in the password prompt. – Blocked channel can be viewed. Note: Channel will be blocked again when you change the channel.
DATE AND TIME SETTINGS-----------------------------------------------------------------1 Open menu with »MENU« button. Manual tuning 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. You can set the local time difference yourself if the time is not detected or is not the same as your local time. 3 Select the menu item »Timer« with »>« or »<« and press »OK« to confirm. – »Timer« menu is displayed. 4 Select the line »Advanced« with »V« or »Λ« and press »OK« to confirm.
SOFTWARE OF THE DEVICE---------------------------------------------------------------1 Open menu with »MENU« button. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select the menu item »TV « with »>« or »<« and press »OK« to confirm. 4 Select the line »About« with »V« or »Λ« and press »OK« to confirm.
ACCESSORIES------------------------------------------------------------------------------------------------------You can connect various accessories to your television to use with video talk, volume control, motion control or a keyboard and mouse to use in your web browser. Display the status of the connected accessory from this menu to perform various adjustments. 1 Open menu with »MENU« button. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
RESET FUNCTIONS---------------------------------------------------------------------------------------1 Open menu with »MENU« button. Deleting channel history 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. This function allows you to delete channel history stored in the Main menu. 4 Select the line »About« with »V« or »Λ« and press »OK« to confirm. 1 From the »About« menu use »V« or »Λ« to select the line »Reset Channel History« and press »OK« to confirm.
USING EXTERNAL DEVICES--------------------------------------------------------------DIGI LINK Your television is equipped with DIGI LINK feature. This feature utilizes CEC (Consumer Electronics Control) protocol. CEC allows you to make an HDMI connection on sockets HDMI between your TV and DVD player, STB or video recorder and control such equipments with the remote control of the television. This feature must also be supported by the device you will connect. You television supports the following functions.
USING EXTERNAL DEVICES--------------------------------------------------------------Device Control You can determine how the remote control of your television will control the external device. Switching the device to standby This option switches the connected external device to standby. « and use »<« or »>« to select 1 Press » either one from »HDMI1« to »HDMI4« and press »OK« to confirm. « and use »<« or »>« to select 1 Press » either one from »HDMI1« to »HDMI4« and press »OK« to confirm.
USINGEXTERNALDEVICES--------------------------------------------------------------Highdefinition–HDready Connectionoptions Which television socket(s) you connect your external devices to depends on the sockets the external device is equipped with and the signals which are available. 7 Note that with many external devices the resolution of the video signal must be adapted to the input sockets on the television (check the external device’s instruction manual).
USING EXTERNAL DEVICES--------------------------------------------------------------Connecting an external device With a digital audio/video signal 7 Suitable devices: Digital satellite receiver, game console, BluRay player, DVD player/ recorder, set-top box, notebook, PC. 7 Video signal: digital image; definition: standard 576p; HDTV 720p, 1080i, 1080p. 7 Audio signal: digital sound (stereo, multichannel compression, uncompressed). 7 Channel position »HDMI1«, »HDMI2«, »HDMI3« or »HDMI4«.
USING EXTERNAL DEVICES--------------------------------------------------------------Selecting Scart volume adjustment 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select the menu item »Sound« with »>« or »<« and press »V« to confirm. Using a DVD recorder, DVD player, video recorder or set-top box 1 Switch on the video recorder, DVD player or set-top box and select the function you wish to use.
USING EXTERNAL DEVICES--------------------------------------------------------------Hi-fi system Connecting digital multi-channel amplifier/AV receiver 1 Connect the HDMI4 (ARC) (HDMI 1.
USING EXTERNAL DEVICES--------------------------------------------------------------Playing the audio signal via the HiFi system 1 Connect the socket U on the television and the corresponding socket on the hi-fi system / AV receiver using a adapter cable. Note: 7 When this function is activated, the hi-fi system / AV receiver (connected to socket U) transmits the audio signal. 2 Open the menu with »MENU«. 3 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
USINGEXTERNALDEVICES--------------------------------------------------------------Cablescreenshare(MHL) MAIN SUB AV/ S-VHS SERVICE MAIN SUB Optic Out LAN USB3 HDMI3 HDMI4 (ARC) SATELLITE (MAIN) 13/18V max.500mA Your television supports MHL connection (Mobile High Definition Connection) thanks to a MHL cable or MHL adapter. 7 MHL connection allows you to share your mobile device screen with television by connecting your mobile device to television by a MHL cable.
USINGEXTERNALDEVICES--------------------------------------------------------------Wirelessscreenshare(Liveshare) 7 Liveshare is a wireless technology featured with Android operating system and used to reflect the screen of your mobile device which supports this feature to your television supporting Liveshare. By using this technology you can share your device’s content, present a slide show or play your favorite game on a larger screen.
OPERATION WITH COMMON INTERFACE--------------------- AV/ S-VHS SERVICE Optic Out LAN USB3 HDMI3 HDMI4 (ARC) SATELLITE (MAIN) 13/18V max.500mA (SUB) ANT-IN 5 V max.50mA MAIN SUB What is common interface? Common Interface (CI) is an interface for DVB receivers. 7 Encrypted channels can only be viewed with a CA module suitable for the encryption system and the corresponding smart card.
NETWORKSETUP------------------------------------------------------------------------------------------Wirednetwork Wirednetworkconnection 1 Connect the output of external modem to LAN socket with Cat 5 cable. SERVICE AV/ S-VHS To use the functions “SMART inter@ctive TV 4.0+” and “Operation with Digital Media Server”, you must connect the television to your home network with internet access and log on. SMART inter@ctive TV 4.
NETWORK SETUP------------------------------------------------------------------------------------------Wired network settings There are two ways of making the wired network settings. A Automatic connection, All data regarding connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically. B Manual connection, all data regarding connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) must be configured manually.
NETWORK SETUP------------------------------------------------------------------------------------------Manual connection Certain networks require Static IP address. If your network requires a Static IP address, you must enter the »IP Address«, »Netmask«, »Gateway« and »DNS« values manually. You can get »IP Adress«, »Netmask«, »Gateway« and »DNS« values (IPS) from your Internet Service Provider. 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
NETWORK SETUP------------------------------------------------------------------------------------------Wireless network Wireless network settings Wireless network connection You have several ways to connect your TV to your home network. A Automatic connection, all data regarding connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically.
NETWORK SETUP------------------------------------------------------------------------------------------Technical requirements Most of the home networks are Dynamic. If you have a dynamic network, you must use a DSL modem that supports DHCP. Modems and IP sharers that support DHCP obtain the »IP Address«, »Netmask«, »Gateway« and »DNS« values required for internet access automatically, and thus you are not required to enter those values manually.
NETWORK SETUP------------------------------------------------------------------------------------------8 Select the line »Select Access Point« with »V« or »Λ« and press »OK« to confirm. – Present WPS-supported wireless networks are scanned to display in the »Select Access Point« menu. 9 Select the network that you want to connect with »V« or, »Λ« and press »OK« to confirm. – 8-digit pin code is displayed in the wireless WPS menu.
NETWORK SETUP------------------------------------------------------------------------------------------Note: 7 For device to discover the wireless modem on the network, the network name should support ASCII characters. 10 Select the required character with »V«, »Λ«, »<« or »>« and move to the next character with »OK«. – Using »Shift« ➡ »OK«, you can switch between uppercase letters / numbers and lowercase letters / special characters.
NETWORK SETUP------------------------------------------------------------------------------------------11 Select the line »Gateway« with »V«. Enter Gateway address with »1…0«. 12 Select the line »Select Access Point« with »Λ« or »V« and press »OK« to confirm. – »Select Access Point« menu is displayed by scanning available wireless networks. 13 Select the network that you want to connect with »V« or »Λ« and confirm with »OK«. – Wireless connection password screen is displayed.
NETWORK SETUP------------------------------------------------------------------------------------------Connecting the TV to a “hidden” network Even if the SSID (Service Set Identifier) of the router is not visible, you can connect your TV to this network. 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confrim. 3 Select the menu item »Network« with »>« or »<« and press »V« to confirm. – »Network« menu is active.
SETTING FURTHER CHANNELS-----------------------------------------------------Searching for all digital channels from a satellite automatically New satellite channels are added or satellite data is changed frequently. Therefore, we recommend you to run auto search function from time to time. All transponders are scanned for new channels. 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
SETTING FURTHER CHANNELS-----------------------------------------------------Searching for digital channels from a satellite manually on a transponder If a certain channel cannot be found with automatic search, you can search it manually by manual search function. You must enter all parameters of the channel correctly. You can obtain the current transponder information from teletext page, satellite TV magazines or internet. 1 Open the menu with »MENU«.
SETTING FURTHER CHANNELS-----------------------------------------------------Antenna settings and searching for digital channels from a satellite automatically Note: 7 The following description about the LNB settings premise a substantial expertise about the satellite systems. Ask your specialist dealer. 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select the menu item »Source« with »>« or »<« and press »V« to confirm.
SETTING FURTHER CHANNELS-----------------------------------------------------Antenna settings, SCR system and searching for digital channels from a satellite automatically Notes: 7 Your TV supports SCR system (Single Channel Router – EN 50494). 7 The following description about the LNB settings premise a substantial expertise about the satellite systems. Ask your specialist dealer. 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
SETTING FURTHER CHANNELS-----------------------------------------------------10 Select Scan Mode. To select whether you want to search for only free digital television channels (Free), only scrambled digital television channels (Scrambled) or both (Free + Scrambled), press »V« or »Λ« and press OK« to select and mark or unmark the »Free« and/or »Scrambled« items. 11 Press »« (red) to start searching. Notes: 7 When updating via the same satellites a security query is displayed at the start of a search.
SETTING FURTHER CHANNELS-----------------------------------------------------DISEqC Mode Based on the number of current satellite system, select the option »Off« »DiSEqC 1.0« or »DiSEqC 1.1« with »<« or »>«. – »Off«: For satellite systems with single antenna. – » DiSEqC 1.0« switch allows for receiving from maximum four satellites at the same time. From »LNB Selection« use »<« or »> to make the »1/4«, »2/4«, »3/4« or »4/4« selection for the satellite that corresponds to relevant DiSEqC positions.
SETTING FURTHER CHANNELS-----------------------------------------------------Motor antenna setup (DiSEqC 1.2) 9 Use »V« or »Λ« to select necessary items. Note: 7 The following description about the LNB settings premise a substantial expertise about the satellite systems. Ask your specialist dealer. Moving Mode Set the Moving Mode with »<« or »>« to »Discrete« or »Continuous«. – »Discrete«: Moves the antenna to west or east for the determined step size.
SETTING FURTHER CHANNELS-----------------------------------------------------Searching for digital channels from the cable provider automatically 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select the menu item »Source« with »>« or »<« and press »V« to confirm. – »Source« menu is active. 4 Select the line »Automatic Channel Search« with »V« or »Λ« and press »OK« to confirm.
SETTING FURTHER CHANNELS-----------------------------------------------------Searching for digital channels from the cable provider manually Searching for digital terrestrial TV channels automatically 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select the menu item »Source« with »>« or »<« and press »V« to confirm. – »Source« menu is active.
SETTING FURTHER CHANNELS----------------------------------------------------- If »« (red) is pressed, the saved channels will be deleted from the current channel list. – The »Digital Searching« menu appears, and the scan for TV channels begins. – The search is complete as soon as the message »Search is completed!« appears. 7 Note: The search can be aborted with »EXIT«. 11 Switch to the Channel Editor with »« (yellow) ; 7 or press »EXIT« to end the setting.
SETTING FURTHER CHANNELS-----------------------------------------------------Automatic service update If this function is activated, possible changes of network operators are updated automatically. The unit must be located in stand-by mode. This updating affects all types of reception - terrestrial, cable and satellite. 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm. 3 Select the menu item »Source« with »>« or »<« and press »V« to confirm.
SETTING FURTHER CHANNELS-----------------------------------------------------Notes: 7 After starting the scan, a security query will appear. Press »« (green) to confirm the option »Yes«. – All channel and favourites lists for the analogue channels will be deleted and compiled new. – The »Analog Searching« menu appears, and the scan for TV channels begins. Depending on the number of television channels received, this can easily take a few minutes.
SETTING FURTHER CHANNELS-----------------------------------------------------Changing stored analogue channels If channels were stored with the automatic channel search during the tuning of the television channels, you can delete them. You can also change or enter the name of a channel and skip a channel. Selecting channel lists 1 Open the menu with »MENU«. 2 Select menu item »Settings« with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
SETTING FURTHER CHANNELS-----------------------------------------------------Creating a list of favourites - analog channels You can select your favourite channels and save them in up to four lists (FAV1 to FAV4). 1 In the »Channel Editor« menu, select the channel(s) you want to add in the favorites list with »V«, »Λ«, »<« or »>«, and highlight the television channel by pressing »OK«. –Channel is marked with »✔«. 2 Activade the »Tools« menu with »« (yellow). 3 Select the line »Add To Fav.
INFORMATION-------------------------------------------------------------------------------------------------Product data sheet Energy efficiency class B Screen diagonal 102 cm/40 inch Power consumption Operation 87,1 W/140 W max. Standby 0.30 W Networked standby 2.90 W Switched off 0.
INFORMATION-------------------------------------------------------------------------------------------------Service information for dealers Notes for WLAN reception This product complies with European Union directives and regulations below: 2006/95/EC: Electrical equipment directive for use within certain voltage limits. 2004/108/EC: Directive relevant for electromagnetic suitability. 2009/125/EC: Directive and relevant for ecodesign for products using energy as well as its following sub-directives.
INFORMATION-------------------------------------------------------------------------------------------------For the customers in Russia Short Range Device with FHSS Modulation Applications. Maximum 2.5 mW e.i.r.p. for collecting telemetry information for automatic tracking and source calculation systems, 100mW e.i.r.p is the maximum allowed short range device density value permitted for use on outdoor applications without any limitation on installation height.
INFORMATION-------------------------------------------------------------------------------------------------Troubleshooting If the remedies given below do not work, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers.
INFORMATION-------------------------------------------------------------------------------------------------Low image quality (pixel) in WLAN mode DMS (for example PC) is connected to the wireless network and away from the modem Bring your DMS closer to the modem Warnings about the connection problems on the display Network Cable or wireless USB network device may be disconnected Check network cable or wireless USB network device Modem do not have Internet connection or has problems Make sure that yo
GLOSSARY-------------------------------------------------------------------------------------------------------------Depending on the television model. ARC The ARC (Audio Return Channel) can be used to play back the audio signal from the television channel using an HDMI cable or an optical cable with a multi-channel amplifier. Backligh Manual setting for back lighting (only active if dynamic back lighting is switched to “OFF”). This setting also directly impacts power consumption.
GLOSSARY-------------------------------------------------------------------------------------------------------------DVB-S DVB-S (Digital Video Broadcasting – Satellite) is the name given to broadcasting DVB signals via satellite. DVB-T DVB-T (Digital Video Broadcasting – Terrestrial) is a variation of DVB which is used for transmitting digital radio and television signals via a cable connection.
GLOSSARY-------------------------------------------------------------------------------------------------------------LIVE SHARE With Live Share, you can stream all the content between WiDi™/Miracast™ certified mobile devices (smartphone or tablet) and the television via wi-fi. You can also easily stream HD content onto the television, and of course vice-versa by transmitting TV content to mobile devices. LNB Low Noise Block is located in the centre of a parabolic antenna.
GLOSSARY-------------------------------------------------------------------------------------------------------------using NAT/PAT/Masquerading. As the address range used can only be viewed within the private network, the same range can also be used in other private networks. The unique nature of an IP address required by the Internet protocol is ensured by this restricted visibility. Proxy server A proxy or proxy server is a service program for computer networks that administers data transfer.
GLOSSARY-------------------------------------------------------------------------------------------------------------USB-Recording Enables recording and playback of television programmes with digital television channels (DVB-S, DVB-T and DVB-C). This depends on the broadcaster. Recording and playback of programmes can only be carried out using an external data medium (hard drive or USB stick). Vibrant Colour Increases the colour contrast and the contrast adjustment.
INDEX---------------------------------------------------------------------------------------------------------------------------A Access control for CA module and smart cards.....87 Accessible Functions.....66 Accessories.....76 Adjusting the volume.....32 Advanced picture settings.....28 Advanced Settings.....67 Apply the device with HDMI ARC function and activate HDMI ARC.....83 Arrange Initial set-up.....20 Audio data.....53 Audio description (audio subtitles).....66 Audio language.....33 Audio settings.
INDEX---------------------------------------------------------------------------------------------------------------------------E Editing the timer.....51 Electronic TV Guide.....36 Entering the analog channel names (maximum 8 characters).....109 Enter own names for the favourites lists (max. 7 characters).....27 Environmental note.....113 Equalizer.....31 F Formats supported with HDMI 1.4.....41 Formatting the partition.....48 Forward/reverse picture search.....52 G General information.....
INDEX---------------------------------------------------------------------------------------------------------------------------Product information.....75 Programme setting for recording.....50 R Receiving digital stations.....8 Recording a programme from the channel list.....49 Recording programmes.....49 Remote control - all functions.....16, 17 Removing the external data media.....54 Renaming AV channels.....27 Repeat functions.....58 Reset Functions.....77 Resetting PIN code.....
INDEX---------------------------------------------------------------------------------------------------------------------------Special features of your television set.....7 Splitting the screen (Split Screen).....44 Stereo/dual channel.....31 Store logo view.....67 Subtitle Mode.....66 Subtitles.....33 Subtitle settings.....56 Switching bluetooth on / off and registering an external subwoofer.....30 Switching off the external device from standby mode.....78 Switching on and off.....
v Grundig Intermedia GmbH • Beuthener Strasse 41 • D–90471 Nürnberg 122 ENGLISH
