Operation Manual

ENGLISH
10
CONNECTION/PREPARATION
-----------------------------------------------------
Connecting the antenna and power corda
1a To receive digital satellite channels (DVB-S),
connect the satellite antenna cable to the
antenna socket SATELLITE MAIN on the
television set;
1b To receive digital satellite programmes
(DVB-S) for the PIP function and the
advanced recording function for TV pro-
grammes, two cables with the satellite sig-
nals are needed. Connect the second cable
to the SATELLITE SUB antenna socket on
the TV.
and / or
2a To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop
or indoor antenna (passive or active indoor
antenna with its own power supply) to the
antenna socket ANT IN on the television
set;
or
2b To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket ANT IN on the televi-
sion set;
or
2c To receive analogue TV channels, connect
the cable for the rooftop antenna to the
antenna socket ANT IN on the television
set.
Note:
7
When connecting an indoor antenna you
may have to try it out at different positions
until you get the best reception.
3 Plug the power cord into the wall socket.
Note:
7
Only plug the device into the mains socket
after you have connected the external
devices and the antenna.
7
Do not use an adapter plug or extension
cable which does not meet the applicable
safety standards. Do not make changes on
the power cord.
AV/ S-VHS
SERVICE
Optic Out LAN
USB3
HDMI3
HDMI4
(ARC)
SATELLITE
13/18V max.500mA
ANT-IN
5 V max.50mA
(MAIN) (SUB)
1a
1b
2
3