Operation Manual

43
ENGLISH
USB RECORDING
-------------------------------------------------------------------------------------------
Connecting external data media
Notes:
7
It is advised to put the television on stand-by
mode before connecting the Skype camera.
7
Before disconnecting the external data me-
dium, the television must first be switched to
standby, otherwise files can be damaged.
7
There are three USB inputs on the television,
namely USB1, USB2 and USB3.
USB1 and USB2 input is intended for USB
devices that require additional power (e.g.
external hard disk).
1 Plug the external hard disk to the USB1 or
USB2 USB interface of the television;
or
plug the memory stick in the USB3 socket
of the television.
Notes:
7
The socket USB3 of the television supports
500 mA current according to the USB stan-
dard. Devices such as external hard disk
and etc. that consume more power can only
be connected to the USB1 and USB2 USB
interface of the television.
7
If you are using a power cable for the
external hard disk that you have connected
to the USB1 and USB2 USB interface,
then the power cable of the external hard
disk must also be unplugged when the TV is
turned off.
7
You must not disconnect the USB Device
from the TV while a file on the USB Device
is being read by the TV.
MAIN
SUB
AV/ S-VHS
SERVICE
Optic Out LAN
USB3
HDMI3
HDMI4
(ARC)
SATELLITE
13/18V max.500mA
ANT-IN
5 V max.50mA
(MAIN) (SUB)