Operation Manual

ENGLISH
44
USB recording settings
Selecting the menu
1 Open the menu with »MENU«.
2 Select the menu item »Records« with »
V «,
»
Λ «, »
<
« or »
>
« and press »OK« to
confirm.
– »Media Player« menu is displayed.
3 Select the line »PVR« with »
V « or » Λ « and
press »OK« to confirm.
– The content is displayed.
4 Open the Media Options menu with press
»TOOLS«.
Media Player > PVR
Channel_1_201548_154649.ts
Tuesday
xx xxx xxxx
Back
BACK
View Mode Auto Fit
Auto Preview On
Slide Show Interval 5
Disk Management
Media Options
5 Select the line »Disk Management« with
»
V « or » Λ « and press »OK« to confirm.
Note:
7
Additional operations are explained in the
following sections.
Disconnecting external data media
1 In the »Disk Management« menu select
the line »Safely Remove Disk« with »
V « or
»
Λ « and press »OK« to confirm.
Note:
7
Disk can be safely removed from the socket
now.
USB RECORDING
-------------------------------------------------------------------------------------------
Selecting external data media
If there are more than one external data media
connected to the television, then select one of
them.
1 In the »Disk Management« menu select the
line »Disk« with »
V « or » Λ « and press
»OK« to confirm.
2 Select the external data media with »
V «
or »
Λ «.
3 Switch back with »BACK
<
« or press
»EXIT« to end the setting.
Selecting a partition on the external
media
If there are more than one partitions on the
external data media, select one of them.
1 In the »Disk Management« menu select the
line »Partition« with »
V « or » Λ « and press
»OK« to confirm.
2 Select the desired partition with »
V « or
»
Λ «.
3 Switch back with »BACK
<
« or press
»EXIT« to end the setting.
Testing external data media
You can test the external data media to see if it
is suitable for the required functions.
1 In the »Disk Management« menu select the
line »Disk« with »
V « or » Λ «. If there are
more then one external data media, select
the desired data media with »
V « or » Λ «.
2 Select the line »Partition« with »
V « or » Λ «.
If there are more then one partitions, select
the desired partition with »
V « or » Λ «.
3 Select the line »Check Disk« with »
V « or
»
Λ « and press »OK« to confirm
– Disk information is displayed.
4 Switch back with »BACK
<
« or press
»EXIT« to end the setting.