40 VLE 6522 BL FR
TABLE DES MATIÈRES- -------------------------------------------------------------------------------3 INSTALLATION ET SÉCURITÉ 5 5 6 6 6 INFORMATIONS GÉNÉRALES Fonctions spéciales de votre téléviseur Réception de stations numériques Système SCR GRUNDIG Remarques importantes concernant la protection de l’environnement Remarques relatives aux images fixes 7 8 8 9 CONNEXION/PRÉPARATION Connexion de l'antenne et du câble d'alimentation Insertion des piles dans la télécommande 10 10 11 12 13 PRÉSENTATION C
TABLE DES MATIÈRES- -------------------------------------------------------------------------------67 MODE TÉLÉTEXTE 88 FONCTIONNEMENT AVEC 68 68 68 68 PORTAIL INTERACTIF (HbbTV) Le HbbTV, qu'est-ce que c'est ? Utilisation du service HbbTV Fonctions supplémentaires des séquences vidéo 88 88 88 L'INTERFACE COMMUNE Qu'est ce qu’une interface commune ? Insertion du module CA Contrôle d'accès au module CA et aux cartes intelligentes 69 69 69 70 71 72 72 73 73 74 74 74 74 75 76 77 FONCTIONS PRATIQUES Ré
INSTALLATION ET SÉCURITÉ------------------------------------------------------------Veuillez prendre en compte les informations suivantes lors de l'installation de votre téléviseur. 7 Ce téléviseur a été conçu pour recevoir et retransmettre des signaux vidéo et audio. Toute autre utilisation est strictement interdite. 7 La meilleure distance pour regarder est de 5 fois la taille de la diagonale de l'écran. L'éclairage externe direct sur l'écran réduit la qualité de l'image.
INSTALLATION ET SÉCURITÉ------------------------------------------------------------7 ce produit. Veuillez utiliser votre téléviseur dans un endroit éloigné autant que possible des téléphones cellulaires, des fours à microonde et des dispositifs semblables fonctionnant avec des ondes de fréquence élevées. Sinon, ces ondes radio pourraient causer un dysfonctionnement de votre téléviseur. 7 Évitez d'exposer les piles à une chaleur excessive due à la lumière directe du soleil, au feu, etc.
INFORMATIONS GÉNÉRALES--------------------------------------------------------Fonctions spéciales de votre téléviseur Votre téléviseur vous permet de recevoir et de visualiser des stations numériques (par DVBS, DVB-T et DVB-C), y compris des stations en Haute Définition (HD). Pour l'instant la réception de ces stations de télévision numériques en Haute Définition ne sont disponibles que dans certains pays d'Europe.
INFORMATIONS GÉNÉRALES--------------------------------------------------------En utilisant la fonction de DMR de votre téléviseur, vous pouvez démarrer la lecture de contenus sur un autre appareil mobile ou PC et vous pouvez effectuer des contrôles de ces appareils au lieu de la télévision. Pour cela, vos appareils doivent être équipés de périphériques DMC (Digital Media Controller).
INFORMATIONS GÉNÉRALES--------------------------------------------------------Remarques relatives aux images fixes En regardant la même image pendant longtemps à l'écran, une image fixe s'immobilise faiblement en arrière-plan. Les images faibles en arrière-plan sont dues à la technologie LCD/LED et ne nécessitent aucune action sous garantie. Pour éviter de se retrouver dans de tels cas et/ou en minimiser l'impact, nous vous recommandons d'observer les consignes ci-après.
CONNEXION/PRÉPARATION-------------------------------------------------------Connexiondel'antenneetducâbled'alimentation 3 2 1 Pour recevoir des chaînes numériques satellites (DVB-S), branchez le câble de l'antenne satellite à la prise de l'antenne »SATELLITE« sur le téléviseur ; et / ou 2a Pour recevoir des émissions numériques terrestres (DVB-T), connectez le câble à l'antenne du toit ou intérieure (antenne intérieure passive ou active avec sa propre alimentation) à la prise de l'antenne »ANT IN«
CONNEXION/PRÉPARATION-------------------------------------------------------Insertion des piles dans la télécommande Remarque concernant l'environnement 7 Le symbole présent sur la pile ou sur l'emballage indique que la pile fournie avec ce produit ne doit pas être traitée comme une ordure ménagère. Sur certaines piles, ce symbole peut être associé à un symbole chimique.
PRÉSENTATION------------------------------------------------------------------------------------------------Connexionsdutéléviseur OpticOut U PCAudioIN 10 FRANÇAIS Prises de sortie audio (optique) pour les signaux PCM/Dolby Digital. Il sert aux amplificateurs audio/ vidéo multicannaux numériques ou aux connexions du récepteur AV. Branchement casque (prise de 3,5 mm) ; Sortie audio externe (avec casque-convertisseur RCA). Entrée de signal audio pour PC; Entrée de signal audio (signal YUV).
PRÉSENTATION------------------------------------------------------------------------------------------------HDMI3 P rise HDMI, entrée de signal audio/vidéo (HDMI). LAN P rise de connexion au câble Internet. HDMI2 P rise HDMI, entrée de signal audio/vidéo (HDMI). HDMI1 P rise HDMI, entrée de signal audio/vidéo (HDMI). USB2 (HDD) P rise USB pour support de données externe et fonction PVR ; port pour clavier ou souris sans fil; prise de l’appareil USB réseau sans fil.
PRÉSENTATION------------------------------------------------------------------------------------------------Télécommande - principales fonctions Met l’appareil en marche à partir de la veille ; sélectionne directement des chaînes. Sélectionne la liste des chaînes (»Toutes«, »FAV 1« à »FAV 4«). Quitte le menu et les applications. Affiche des informations. Ouvre le menu. Ouvre la liste des chaînes. Ouvre le menu Outils.. Règle le volume. Active ou désactive le son (muet).
PRÉSENTATION------------------------------------------------------------------------------------------------Télécommande – toutes les fonctions ! R Bouton d’éclairage. S'éteint automa- tiquement après un certain temps. (rouge) Sélectionne une page en mode télétexte ; (vert) Sélectionne / active diverses fonctions (jaune) dans les menus. (bleu) 5 Double la taille des caractères en mode télétexte ; sélectionne la piste / image précédente dans l’explorateur de fichiers.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Configuration initiale La télévision est équipée d'un « assistant d'installation », qui vous guide étape par étape à travers les paramètres de base. À l’aide de l'écran de dialogue, le manuel d’utilisation assure une présentation simple et claire des paramètres supposés complexes et des entrées de données.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Configuration initiale – Présentation Sélectionner la langue (page 16, étape 3) Sélectionner le pays (page 16, étape 5) Sélectionner le mode (page 16, étape 6) Configuration réseau (page 16, étape 8) Par câble Wifi Sans fil WPS (page 16, étape 8) (page 17, étape 13) (chapitre page 38) Auto Auto Bouton PIN (Chapitre page 38) (Chapitre page 38) (page 16, étape 8) Manuellement
RÉGLAGES---------------------------------------------------------------------------------------------------------------Organisation de la configuration initiale 6 Confirmez l’option »Mode Accueil« avec la touche »OK« ; ou 1 Basculez le téléviseur en mode veille avec le bouton d'allumage »ON • OFF«. sélectionnez l’option »Amélioré« à l’aide de la touche »<« ou »>« et appuyez sur »OK« pour confirmer.
RÉGLAGES---------------------------------------------------------------------------------------------------------------10 Appuyez sur »« (rouge) pour sélectionner »Connecter« pour établir une connexion au modem. – Le message »Connexion... Veuillez patienter« s'affiche, et en cas de connexion, le message »Connexion à la Passerelle : Réussie« s’affiche. 11 Appuyez sur »« (vert) pour vérifier les réglages effectués et également si la connexion au réseau local et Internet a été établie.
RÉGLAGES---------------------------------------------------------------------------------------------------------------23 Confirmez le bouton-poussoir »Page suivante« à l’aide de la touche »OK«. Remarques : Sélectionnez Type de chaîne. Appuyez sur »<« ou »>« si vous voulez rechercher uniquement les chaînes numériques (Numérique) ou uniquement les chaînes radio (Radio) ou les deux (Numérique + Radio) et appuyez sur »OK« pour sélectionner et marquer ou démarquer les éléments »Numérique« et/ou »Radio«.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Recherche des chaînes de télévision numériques terrestres (DVB-T) 31 Sélectionnez l’option »Air« à l’aide de la touche »<« ou »>« et appuyez sur »OK« pour confirmer. Important : L'alimentation de l'antenne (5 V) ne peut être allumée que si l'antenne est une antenne active d'intérieur équipée d'un amplificateur de signal.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Modification de l’Éditeur de chaîne des chaînes numériques Ouverture du Tableau des programmes Les chaînes trouvées à la fin de la recherche sont mémorisées dans l’»Éditeur de chaîne«. 1 Ouvrez le menu à l’aide de la touche »MENU«.
RÉGLAGES---------------------------------------------------------------------------------------------------------------« signe à côté du nom de la chaîne dans le tableau des programmes.
RÉGLAGES---------------------------------------------------------------------------------------------------------------4 Sélectionnez le nouvel emplacement de la chaîne avec les touches »V«, »Λ«, »<« ou »>« et appuyez sur »OK« pour confirmer. 5 Pour quitter le menu »Éditeur de chaîne«, appuyez sur »EXIT«. Affichage des chaînes dans l’Éditeur de chaîne par le type d’antenne Si vous possédez plus d’un type d’antenne, vous pouvez afficher les chaînes dans l’Éditeur de chaîne par le type d’antenne.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Appuyez sur »« (jaune) et sélectionnez la ligne »Supprimer des Fav.« à l’aide des touches »V«, »Λ« et confirmez en appuyant sur »OK«. La chaîne que vous avez sélectionnée est maintenant supprimée de la liste des favoris. Lorsqu'une chaîne mémorisée dans la liste des chaînes favorites est supprimée, l’ordre des chaînes dans la liste des favoris est mis à jour.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Renommer les chaînes AV Vous pouvez renommer les chaînes AV en fonction du périphérique que vous avez connecté. Par exemple, pour un PC que vous avez connecté à une source HDMI1 du téléviseur avec un câble HDMI, vous pouvez nommer la source comme le PC. 1 Ouvrez le menu »Type signal entrée« à l’aide de la touche » «.
RÉGLAGES--------------------------------------------------------------------------------------------------------------Réglagesdel'image Réglagesdel’imageaméliorés 1 Ouvrez le menu à l’aide de la touche »MENU«. Les « réglages de l'image améliorés » se retrouvent dans les principales améliorations d'images numériques qui, cependant, doivent être utilisées au besoin lorsque la qualité de l'image et la transmission sont excellentes.
RÉGLAGES---------------------------------------------------------------------------------------------------------------»Dynamic Contrast« – La fonction dynamique et optimale règle le contraste pour le contenu de l’image respective par l’analyse des images et sa modification en fonction d’un changement de contraste. Ceci augmente le contraste, cependant, peut aussi réduire les niveaux de luminosité visibles dans l’image.
RÉGLAGES--------------------------------------------------------------------------------------------------------------Réglagesduson DTSStudioSound™ 1 Ouvrez le menu à l’aide de la touche »MENU«. DTS Studio Sound est une suite de solution sonore avancée qui extrait et place avec précision les signaux audio pour une expérience de son immersive à travers les haut-parleurs intégrés des téléviseurs.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Chaîne stéréo/dual Volume automatique Si l’appareil reçoit des programmes avec deux canaux, par exemple un film avec la bande son originale sur le canal audio B (affichage : »Dual II«) et la version doublage sur la bande son A (affichage: »Dual I«), vous pouvez sélectionner le canal audio souhaité. Les chaînes de télévision émettent avec différents niveaux de volume.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------Options de base Mise en marche/arrêt 1 Basculez le téléviseur en mode veille avec le bouton d'allumage »ON • OFF«. 2 Appuyez sur »8«, »1…0« ou »P+« ou »P-« pour basculer le téléviseur en mode veille. 3 Appuyez sur »8« pour basculer le téléviseur en mode veille. 4 Basculez le téléviseur en mode veille avec le bouton d'allumage »ON • OFF«.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------Réglages de l'image Sous-titres 1 Ouvrez le menu Outils à l’aide de la touche »TOOLS«. Vous pouvez sélectionner différents sous-titres lorsque vous regardez des canaux numériques. Cela dépend du programme retransmis. 2 Sélectionnez la ligne »Mode Image« avec les touches »V« ou »Λ«. 3 Sélectionnez le réglage de l’image en appuyant sur »<« ou »>«.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------Arrêt de la programmation Dans le menu »Arrêt programmation«, vous pouvez entrer l'heure d'arrêt de la télévision. Lorsque cette heure arrive à échéance, la télévision passe en mode de veille. 1 Ouvrez le menu Outils à l’aide de la touche »TOOLS«. 2 Sélectionnez la ligne »Arrêt programmation« avec les touches »V « ou »Λ«. 3 Sélectionnez le temps d'arrêt à l’aide de la touche »<« ou »>«.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------De nombreuses entreprises de radiodiffusion offrent le programme quotidien mais ne les accompagnent pas de descriptions détaillées. 7 D'autres encore n'offrent pas d'informations du tout. 7 3 Sélectionnez la chaîne de télévision avec les touches »V« ou »Λ«. – Les informations sur le programme actuel s’affichent dans la chaîne de télévision sélectionnée. 4 Passez aux informations sur le programme en cours avec la touche »OK«.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------6 En appuyant une fois sur »>« vous pouvez accéder aux résultats et sélectionner les résultats à l’aide de la touche »V« ou »Λ« et afficher les sous-catégories avec la touche »OK«. Remarque : Pour rechercher les sujets spécifiques, appuyez sur »<« pour sélectionner l’option »À la carte« et appuyez sur »OK« pour confirmer. Sélectionnez le sujet souhaité dans la liste avec la touche »V« ou »Λ« et confirmez avec la touche »OK«.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Pour utiliser les fonctions « GRUNDIG AppLICATION store » et « Fonctionnement avec serveur DMS », vous devez connecter votre téléviseur à votre réseau domestique utilisant une connexion Internet, puis vous connecter. Réseaucâblé Connexionauréseaucâblé 1 Connectez la sortie du modem externe à la prise »LAN« avec le câble Cat 5.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Réglagesduréseauavecfil Il y a deux manières d'effectuer les réglages du réseau câblé : A Connexion automatique, Toutes les données concernant les réglages de la connexion (»IP Adresse«, »Netmask«, »Gateway« et »DNS«) sont obtenues automatiquement du modem. A Connexion manuelle, toutes les données de réglages de connexion (»IP Adresse«, »Netmask«, »Gateway« et »DNS«) doivent être configurées manuellement.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Connexionmanuelle Entrez l’adresse IP avec la touche »1…0«. Certains réseaux requièrent une adresse statique IP. Si votre réseau requiert une adresse IP statique, vous devez entrer les valeurs »IP Adresse«, »Netmask«, »Gateway« et »DNS« manuellement. Vous pouvez obtenir vos valeurs »Adresse IP«, »Netmask«, »Gateway« et »DNS« auprès de votre Fournisseur de service internet (ISP).
CONFIGURATIONRÉSEAU---------------------------------------------------------------Réseausansfil 7 Connexionauréseauwifi Il existe différentes manières d'effectuer les réglages du réseau wifi. »Sans fil« et »Sans fil WPS« (Configuration protégée WiFi). 7 7 7 Veuillez noter que la performance de lecture vidéo pour une application DLNA sur un réseau wifi local et dans une application SMART Inter@ctive TV 3.0 dépend du nombre d’utilisateurs du réseau, comme c’est le cas pour tout réseau wifi.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Exigencestechniques La plupart des réseaux domestiques sont dynamiques. Si vous avez un réseau dynamique, vous devez utiliser un modem DSL compatible DHCP. Les modems et IP sharers compatibles DHCP obtiennent automatiquement les valeurs »IP Adresse«, »Netmask«, »Gateway« et »DNS« requises pour l'accès Internet et vous n'êtes donc pas obligés d'entrer manuellement ces valeurs.
CONFIGURATIONRÉSEAU---------------------------------------------------------------8 Sélectionnez la ligne »Sélect. point d'accès« avec les touches »V« ou »Λ« et appuyez sur »OK« pour confirmer. – Les réseaux sans fil présents compatibles WPS sont recherchés pour s’afficher dans le menu »Sélect. point d'accès«. 9 Sélectionnez le réseau auquel vous voulez vous connecter à l’aide des touches »V«, »Λ«, »<« ou »>« et appuyez sur »OK« pour confirmer.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Remarque: Pour que le téléviseur découvre le modem sans fil sur le réseau, le nom du réseau doit être compatible avec les caractères ASCII. 7 10 Sélectionnez le caractère requis à l’aide des touches »V«, »Λ«, »<« ou »>« et passez au caractère suivant en appuyant sur »OK«. – À laide des touches»Shift« ➡ »OK«, vous pouvez basculer entre les lettres majuscules/chiffres et les lettres minuscules/ caractères spéciaux.
CONFIGURATION RÉSEAU----------------------------------------------------------------10 Sélectionnez la ligne »DNS« avec la touche »V«. Entrez l’adresse DNS avec la touche »1…0«. 11 Sélectionnez la ligne »Netmask« avec la touche »V«. Entrez l’adresse Netmask avec la touche »1…0«. 12 Sélectionnez la ligne »Gateway« avec la touche »V«. Entrez l’adresse Gateway avec la touche »1…0«. 13 Sélectionnez la ligne »Sélect. point d'accès« avec les touches »Λ« ou »V« et appuyez sur »OK« pour confirmer.
CONFIGURATION RÉSEAU----------------------------------------------------------------Connectez le téléviseur à un réseau « caché » Même si le SSID (Service Set Identifier) du routeur est invisible, vous pouvez connecter votre téléviseur à ce réseau. 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Configuration réseau« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer.
FONCTION SMART INTER@CTIVE TV 3.0------------------------Applications Internet SMART Inter@ctive TV 3.0 Grundig se réserve le droit d'apporter toutes les modifications, restrictions, extensions, transferts et suppression des applications Internet fournies à travers votre SMART Inter@ ctive TV 3.0. 7 Les applications interactives Smart Inter@ctive TV 3.0 fournissent à votre téléviseur les services et les pages Internet. Ces applications sont conçues en fonction de votre téléviseur.
FONCTION SMART INTER@CTIVE TV 3.0------------------------Navigation et saisie de texte pendant l’enregistrement 1 Appuyez sur la touche »@« pour ouvrir le menu »MyApps«. – L’écran d’enregistrement de Grundig Smart Apps s’affiche. Entrer Pour une utilisation complète des applications intelligentes, vous devez vous connecter.
FONCTIONSMARTINTER@CTIVETV3.0------------------------Connexionavecuncompte GrundigApplicationStore Si vous réinitialisez votre téléviseur aux réglages d’usine pour quelque raison que ce soit avec l’option »Enregistrer applis installées« non sélectionnée, toutes les applications que vous avez téléchargées seront supprimées, et lorsque vous accédez au menu » inter@ctive Applications«, l’écran d’inscription s’ affiche à nouveau.
FONCTION SMART INTER@CTIVE TV 3.0------------------------2 Pour entrer dans la fenêtre »Grundig Application Store«, sélectionnez le boutonpoussoir »Magasin en ligne« à l’aide des touches »V«, »Λ«, »<« ou »>« et appuyez sur »OK« pour confirmer. – Le menu »Grundig Application Store« s’affiche.
FONCTION SMART INTER@CTIVE TV 3.0------------------------Ajouter les applications Internet aux favoris Menu principal du navigateur Smart Inter@ctive TV 3.0 Vous pouvez ajouter des applications Internet fréquemment utilisées aux favoris et récupérer ces sous- rubriques »Favoris« sous les catégories. 1 Applications. 1 Appuyez sur la touche »« (rouge) dans le menu »My apps« et sélectionnez les catégories à l’aide de la touche »<« ou »>«.
FONCTIONSMARTINTER@CTIVETV3.0------------------------2 My apps Catégories 4 Navigationdanslemenuprincipal 1 Appuyez sur la touche »« (rouge) dans le menu »My apps« et sélectionnez les catégories à l’aide de la touche »<« ou »>«. 2 Sélectionnez l’application nécessaire à l’aide des touches »V«, »Λ«, »<« ou »>« et appuyez sur »OK« pour confirmer. – Le menu principal de l'application s'affiche après un court moment.
NAVIGATEURWEB--------------------------------------------------------------------------------------MenuNavigateurWeb 3 4 5 6 7 8 9 10 11 12 13 14 15 http://www.grundig.de grundig. 2 16 1 Zoom arrière 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Zoom avant Page Précédente Page Suivante Commandes du menu. Onglet activé Page précédente. Page suivante Rafraîchir. Nouvel onglet. Barre d’adresse. Recherche sur le site. Favoris. Page d’accueil Réglages Historique. Recherche sur le Web. Zoom.
MODESERVEURMULTIMÉDIA-----------------------------------------------------Lecturedesdossiersvidéo,musiqueetimageavecuneconnexionauréseaulocal. Grâce au menu DLNA de votre téléviseur, vous pouvez facilement avoir accès aux fichiers vidéo, musicaux, photo sur le serveur ; et grâce à l'option DMR, vous pouvez automatiquement démarrer et interrompre la lecture des supports sur les périphériques dotés de la fonction DMC.
MODE SERVEUR MULTIMÉDIA------------------------------------------------------Remarques : La structure des fichiers et dossiers de l'appareil DMS dans le menu peut varier selon le logiciel DMS en cours d'utilisation. 7 Les sous-titres ne sont pas compatibles sur les fichiers vidéo lus à travers l'appareil DMS. 7 Lecture 1 Sélectionnez le dossier du contenu sur l'appareil DMS avec les touches »V«, »Λ«, »<« ou »>« et appuyez sur »OK« pour confirmer. – Tous les titres s’affichent.
ENREGISTREMENTUSB--------------------------------------------------------------------------Informationsrelativesà l'enregistrementetàlalecture desprogrammesdetélévision 7 7 7 7 7 L'enregistrement et la reproduction des programmes n'est possible qu'avec les chaînes de télévision numériques (DVB-S, DVB-T et DVB-C). En fonction de la station émettrice, vous pouvez être confronté à diverses restrictions sur certaines fonctions propres à certaines chaînes de télévision.
ENREGISTREMENTUSB--------------------------------------------------------------------------Connexiond'unsupportdedonnéesexterne Remarques: Il est conseillé de mettre le téléviseur en mode veille avant de connecter le support de données externe. 7 7 7 7 Avant de déconnecter le support de données, placez d'abord la télévision en veille pour ne pas endommager les fichiers. Il existe trois entrées USB sur le téléviseur, à savoir »USB1« et »USB2(HDD)«.
ENREGISTREMENT USB--------------------------------------------------------------------------Déconnexion d'un support de données externe 1 Dans le menu »Gestion disque«, sélectionnez la ligne »Retirer le disque« avec les touches »V« ou »Λ« et appuyez sur »OK« pour confirmer. Remarque : Vous pouvez maintenant retirer le disque en toute sécurité de la prise.
ENREGISTREMENT USB--------------------------------------------------------------------------Programmes de décalage en mode « Pause » Vous pouvez interrompre le programme que vous regardez Il s'agit d’une fonction utile. Par exemple, si le téléphone sonne pendant que vous regardez un film, vous pouvez interrompre le film et le reprendre après votre appel sans rien manquer. La dernière scène qui est gelée s’affiche et le décalage est enregistré dans le support de données externe.
ENREGISTREMENT USB--------------------------------------------------------------------------Enregistrement d'un programme à partir de la liste de chaînes 1 Appuyez sur »OK« pour ouvrir la liste de chaînes. 2 Sélectionnez une chaîne à l’aide de la touche »<« ou »>« et appuyez sur »OK« pour confirmer. 3 Appuyez sur »EXIT« pour quitter la liste de chaînes. « (rouge) pour lancer 4 Appuyez sur » l'enregistrement.
ENREGISTREMENT USB--------------------------------------------------------------------------Définir l'entrée / temps de suivi Avec cette fonction, vous pouvez changer le temps d'enregistrement défini par le guide TV électronique. Si vous pensez qu'un programme va commencer avec quelques minutes d'avance ou qu'il se terminera avec quelques minutes de retard, vous avez la possibilité "d'ajouter" jusqu'à 60 minutes à ce temps. 1 Ouvrez le menu à l’aide de la touche »MENU«.
ENREGISTREMENT USB--------------------------------------------------------------------------4 Avec la touche »V« ou »Λ«, sélectionnez les éléments que vous voulez éditer et modifiez-les à l’aide des touches »1…0« et »<« ou »>«. 5 Pour mémoriser la modification, appuyez sur »« (bleu). – Le minuteur est modifié. 6 Appuyez sur »EXIT« pour terminer les réglages. Suppression du minuteur Vous pouvez supprimer les minuteurs programmés. 1 Ouvrez le menu à l’aide de la touche »MENU«.
ENREGISTREMENT USB--------------------------------------------------------------------------Lecture pendant un enregistrement. Vous pouvez soit regarder une émission en cours d’enregistrement, ou un programme précédemment enregistré pendant le déroulement de l'enregistrement. 1 Sélectionner la chaîne à l’aide des touches »1…0« ou »P+«, »P–« et appuyez sur » « pour lancer l’enregistrement. 2 Pour afficher le contenu PVR, appuyez sur la touche »« (rouge).
CONNEXION AU PORT USB-----------------------------------------------------------Formats de fichiers Votre télévision peut être utilisée via l'entrée USB avec les formats de fichier suivants : Données vidéo La compression / décompression vidéo (codec) a pour but de réduire la zone de stockage sans altérer la qualité de l’image. Votre récepteur numérique HD vous permet de lire les données vidéo compressées à l’aide des standards XVID, H.264/MPEG-4 AVC(L4.1, Réf. Trames:4), MPEG-4, MPEG-2, MPEG-1, MJPEG, MOV.
CONNEXIONAUPORTUSB-----------------------------------------------------------Connexiond'unsupportdedonnéesexterne Il est conseillé de mettre le téléviseur en mode veille avant de connecter le support de données externes. Connectez l'appareil puis allumez de nouveau la télévision. Avant de déconnecter le support de données, placez d'abord la télévision en veille pour ne pas endommager les fichiers.
CONNEXIONAUPORTUSB-----------------------------------------------------------L'explorateurdefichier L’explorateur de fichier affiche les données vidéo, audio et image fournies par le support de données externes. Réglagesdanslemenu paramètresUSB Sélectiondumenu Si le support de données contient différents formats de fichier, vous pouvez désactiver les données (fichiers vidéo, audio, image) inutiles pendant la lecture à l’aide d’une fonction de filtre.
CONNEXION AU PORT USB-----------------------------------------------------------Sélection de la durée de l'affichage du diaporama 1 Sélectionnez la ligne »Intervalle diaporama« avec les touches »V« ou »Λ«. 2 Sélectionnez la durée (3, 5, 10 secondes) à l’aide de la touche »<« ou »>«. 3 Appuyez sur »EXIT« pour terminer les réglages.
CONNEXION AU PORT USB-----------------------------------------------------------8 Appuyez sur »!« pour interrompre la lecture. 9 Pour reprendre la lecture appuyez sur »8«. 10 Appuyez sur »7« pour terminer la lecture. – L'explorateur de fichier apparaît. Remarques : Utilisez la touche »Λ« pour sélectionner »Dossier parent«, quand vous souhaitez retourner au dossier précédent.
CONNEXION AU PORT USB-----------------------------------------------------------Passage au délai souhaité (uniquement pour les fichiers vidéo) 1 Appuyez sur »OK« pendant la lecture. 2 Entrez l’heure à laquelle vous voulez vous déplacer avec la touche »1...0« et confirmez avec la touche »« (vert). Recherche vers l'avant (uniquement pour les fichiers vidéo et audio) Vous pouvez sélectionner différentes vitesses (X2, X4, X8, X16 et X32 vers l'avant ou l'arrière).
MODE TÉLÉTEXTE--------------------------------------------------------------------------------------------Remarque : Si vous désirez utiliser uniquement ce texte vidéo « normal », désactivez le texte vidéo numérique, consultez la page 101. 7 Mode TOP text ou FLOF text 1 Appuyez sur »TXT« pour passer au mode Télétexte. 2 Vous pouvez sélectionner directement les pages de télétexte à l’aide des touches »1...0« ou étape par étape à l’aide des touches »V« ou »Λ«. Pour revenir à la page 100, appuyez sur »?«.
MODE TÉLÉTEXTE--------------------------------------------------------------------------------------------Afficher directement une sous-page Si la page de télétexte sélectionnée contient d'autres pages, le numéro de la sous-page affichée ainsi que le nombre total de sous-pages sont affichés. 1 Affichez la sous-page à l’aide de la touche » «. 2 Appuyez sur »« (rouge) ou »« (vert) pour sélectionner une sous-page. 3 Appuyez sur » « pour quitter la fonction.
PORTAIL INTERACTIF (HBBTV)------------------------------------------------------Le HbbTV, qu'est-ce que c'est ? La fonction HbbTV fournit une transmission de télétexte interactive prochaine génération avec sa structure moderne, son conteu et ses image et vidéos haute définition (HD). Pour recevoir une transmission HbbTV, le téléviseur doit être connecté à Internet.
FONCTIONSPRATIQUES---------------------------------------------------------------------RéglagesTV Changerlalangueaudio 1 Ouvrez le menu à l’aide de la touche »MENU«. (uniquement pour les chaînes numériques) 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Réglages TV« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. – Le menu »Réglages TV« s’affiche.
FONCTIONS PRATIQUES---------------------------------------------------------------------Changer la langue du clavier Paramètres d’accessibilité Vous pouvez sélectionner la langue du clavier connecté à votre téléviseur. 1 Ouvrez le menu à l’aide de la touche »MENU«. 1 Sélectionnez la ligne »Langue et clavier« à l’aide des touches »V« ou »Λ« et appuyez sur »OK« pour confirmer. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«.
FONCTIONS PRATIQUES---------------------------------------------------------------------Description audio (sous-titres audio) Accessoires La description audio est un canal audio supplémentaire pour les personnes à vue réduite. Les activités, paysages, changements de scène ou de l'apparence, les expressions gestuelles et faciales des acteurs y sont décrits. Afficher le statut des accessoires connectés à partir de ce menu pour effectuer les différents réglages.
FONCTIONS PRATIQUES---------------------------------------------------------------------Paramètres avancés Mémoriser l’affichage du logo 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Réglages TV« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. 4 Sélectionnez la ligne »Paramètres avancés« avec les touches »V« ou »Λ« et appuyez sur »OK« pour confirmer.
FONCTIONS PRATIQUES---------------------------------------------------------------------3 Appuyez sur »BACK <« pour revenir au menu précédent ou appuyez sur »EXIT« pour terminer les réglages. Remarque : 7 Si l’écran se ferme pendant que vous ecoutez la musique en mode USB, appuyez sur »MENU« et sélectionnez »Off« à l’aide des touches »<« ou »>« pour fermer la fonctionnalité. Fonctions dans le menu « À propos » 1 Ouvrez le menu à l’aide de la touche »MENU«.
FONCTIONS PRATIQUES---------------------------------------------------------------------Avertissement : Le téléviseur redémarre après la mise à jour. N’éteignez pas votre téléviseur pendant les mises à jour. Remarque : 7 Pour une vérification automatique de la mise à jour logicielle, sélectionnez dans le menu »Configuration source« , »Paramètres avancés«la ligne »OAD« à l’aide des touches »V« ou »Λ«. Utilisez »<« ou »>« pour sélectionner »On«.
FONCTIONSPRATIQUES---------------------------------------------------------------------Réglageminuterie MinuterieMarche 1 Ouvrez le menu à l’aide de la touche »MENU«. Dans le menu Minuterie marche, vous pouvez entrer l'heure d'allumage de la télévision. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Applications de la minuterie« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. – Le menu »App de minuterie« s’affiche.
FONCTIONS PRATIQUES---------------------------------------------------------------------Arrêt auto Dans le menu »Veille Auto.«, vous pouvez entrer l'heure d'arrêt de la télévision. Le téléviseur passe en mode veille après que l’heure saisie soit écoulée. 1 Sélectionnez la ligne »Arrêt auto« avec les touches »V« ou »Λ« et appuyez sur »OK« pour confirmer. 2 Sélectionnez la ligne »Mode« avec la touche »V« et ensuite Sélectionnez l’option »AUTO« à l’aide des touches »<« ou »>«.
FONCTIONSPRATIQUES---------------------------------------------------------------------Réglagesparentaux 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Accord parental« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. – Le menu »Accord parental« s’affiche. Config.
FONCTIONS PRATIQUES---------------------------------------------------------------------2 Entrez le code PIN »1234« à l’aide des touches »1...0« dans l’invite de mot de passe. 3 Activez (On) ou désactivez (Off) le verrouillage du panneau à l’aide des touches »<« ou »>«. 5 Sélectionnez la chaîne que vous voulez bloquer à l’aide des touches »V«, »Λ«, »<« ou »>« et surlignez-la en appuyant sur »OK«. –La chaîne est marquée d’une coche »✔«. 6 Activez le menu »Outils« avec »« (jaune).
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------DIGI LINK Votre téléviseur est doté de la fonction DIGI LINK. Cette fonction utilise le protocole CEC (Comité des télécommunications et de l’électronique). CEC vous permet d’établir une connexion HDMI entre votre TV et le lecteur DVD, STB ou l’enregistreur vidéo et contrôle ces équipements avec la télécommande du téléviseur. Cette fonction doit également doit être prise en charge par le périphérique que vous brancherez.
UTILISATIONDEPÉRIPHÉRIQUESEXTERNES------------Contrôledepériphérique 7 Vous pouvez déterminer la méthode par laquelle la télécommande de votre téléviseur va contrôler le périphérique externe. « et utilisez »<« ou »>« 1 Appuyez sur » pour sélectionner un signal entre »HDMI1« et »HDMI4«,et appuyez sur »OK« pour confirmer. 2 Ouvrez le menu à l’aide de la touche »MENU«. 3 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«.
UTILISATIONDEPÉRIPHÉRIQUESEXTERNES------------Hautedéfinition-HDprêt Votre télévision peut reproduire des signaux de télévision de haute définition (HDTV). Vous pouvez brancher les sources d'entrée ( d é c o d e u r H DT V ou lecteur DVD Haute Définition) à la prise »HDMI« (signal HDTV numérique). Ceci garantit la visualisation de programmes numériques HDTV même s’ils sont protégés contre copie (Protection contre la copie de contenu numérique en haute définition HDCP).
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------Connexion à un périphérique externe Avec un signal numérique audio/ vidéo Périphériques adaptés : Récepteur satellite numérique, Playstation, lecteur BluRay, lecteur/ enregistreur DVD, boîtier décodeur, ordinateur portable, PC. 7 Signal vidéo : image numérique ; définition : standard 576p ; HDTV 720p, 1080i, 1080p. 7 Signal audio : son numérique (stéréo, compression multicannal, non comprimé). 7 Position de canal »HDMI1«, »HDMI2«, »HDMI3«, »HDMI4«.
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------Avec signal S-Vidéo Périphériques adaptés : Lecteur/enregistreur DVD, enregistreur vidéo, enregistreur caméra, ordinateur portable, PC. 7 Signal vidéo : Y/C. 7 Signal audio : stéréo, analogique. 7 Position de la chaîne »S-VIDEO«. 7 1 Connectez la prise »AV1/S-VHS« du téléviseur à celle correspondante se trouvant sur le périphérique externe en utilisant un câble EURO/AV (signal vidéo et audio).
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------Appliquez la fonction HDMI ARC à l'appareil et activez HDMI ARC. 1 Mettez l'amplificateur numérique multicanal ou le récepteur AV sous tension. Si un lecteur Blu-ray est relié au récepteur AV, le lecteur doit être mis sous tension également. 2 Ouvrez le menu Outils à l’aide de la touche »TOOLS«. 3 Sélectionnez la ligne »Digilink« avec les touches »V « ou »Λ« et appuyez sur »OK« pour confirmer.
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------7 Sélectionnez l’option »Fixe« ou »Ajustable« à l’aide de la touche »<« ou »>«. Remarques : Si vous sélectionnez »Ajustable«, le volume peut être modifié dans l'option du menu »Volume sortie audio«. 7 Si vous voulez obtenir la sortie audio à partir du système hi-fi / récepteur AV, sélectionnez l’option »Off« dans la line »Haut-parleur TV avec»<« ou »>« 7 8 Appuyez sur »EXIT« pour terminer les réglages.
TAILLEDEL’ÉCRANSANSFIL(LIVESHARE)------------------- Qu'est-cequeleLIVESHARE? 7 Liveshare est une technologie sans fil équipée d’un système d’exploitation Android et utilisé pour refléter l’écran de votre périphérique mobile qui prend en charge cette fonctionnalité sur votre téléviseur équipé de Liveshare. À laide de cette technologie vous pouvez partager le contenu de votre périphérique, présenter une diapositive ou jouer à votre jeu préféré sur un écran plus large.
MODEDUMONITEURPC-------------------------------------------------------------------- Branchementd'unPC 1 Connectez la prise »PC-IN« sur la télévision sur la prise correspondante sur le PC en utilisant un câble VGA. 2 Connectez la prise »Audio« sur la télévision sur la prise correspondante sur le PC en utilisant un câble adapté. Remarque: 7 Réglez votre PC pour l'écran (par exemple, résolution de l'image 1 280 x 768, fréquence de l'image 60 Hz).
FONCTIONNEMENTAVECL'INTERFACECOMMUNE Qu'estcequ’uneinterfacecommune? Contrôled'accèsaumoduleCAet auxcartesintelligentes L'interface commune (CI) est une interface pour les récepteurs DVB. 7 Les stations encodées ne peuvent être visualisées qu'avec le module CA adapté au système d'encodage et équipé de la carte intelligente correspondante. 7 Le téléviseur est équipé d'une fente d'Interface commune dans laquelle les modules CA de différents fournisseurs peuvent être insérés.
RÉGLAGESSPÉCIAUX------------------------------------------------------------------------------Rechercheautomatiquedes chaînesdetélévisionnumériquesàpartird'unsatellite Vous pouvez ajouter de nouvelles chaînes satellite ou modifier de façon fréquente les données satellite. Par conséquent, nous vous recommandons d’exécuter la fonction de recherche automatique de temps en temps. 8 Sélectionnez Type scan.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Recherche manuelle des chaînes de télévision numériques à partir d'un satellite Si vous ne parvenez pas à trouver certaines chaînes grâce à la recherche automatique, vous pouvez les chercher manuellement par la fonction de la recherche manuelle. Vous devez entrer correctement tous les paramètres de la chaîne.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Réglages LNB Remarques : La description suivante relative aux réglages LNB introduit une expertise substantielle concernant les systèmes satellite. Contactez votre revendeur à ce sujet. 7 Votre téléviseur prend en charge le système SCR (routeur pour canaux uniques). Si vous utilisez un système satellite SCR, suivez les étapes décrites dans la section » Type LNB«.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Avec le système satellite SCR, la recherche automatique simultanée par plusieurs utilisateurs / récepteurs peut engendrer des problèmes. – »Mode DISEqC« : En fonction du nombre de système satellite en cours, sélectionnez l’option »Off« »DiSEqC 1.0« ou »DiSEqC 1.1« à l'aide des touches »<« ou »>«. »Off« : Pour les systèmes satellite avec une seule antenne. Le commutateur »DiSEqC 1.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Réglages DiSEqC 1.2 Réglez la position de l’antenne satellite en fonction de chaque satellite. Ces réglages peuvent être mémorisés et vous pouvez déplacer l’antenne vers une position préréglée. 1 Sélectionnez la ligne »REGLAGE DiSEqC 1.2« avec les touches »V « ou »Λ« et appuyez sur »OK« pour confirmer. – Le menu »REGLAGE DiSEqC 1.2« s’affiche.
RÉGLAGESSPÉCIAUX------------------------------------------------------------------------------– Si le scan ne peut pas être réalisé avec l’option »Rapide«, sélectionnez »Complet«. Toutes les chaînes sont réglées et enregistrées avec le scan »Complet«. Ce processus de recherche peut prendre un long moment. Cette option est recommandée si votre opérateur par câble ne prend pas en charge la fonction de recherche rapide.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------ou Recherche automatique de chaînes TV numériques terrestres appuyez sur »EXIT« pour terminer les réglages. 1 Ouvrez le menu à l’aide de la touche »MENU«. 9 Passez à l’Éditeur de chaîne à l'aide de la touche »« (jaune) ; Recherche manuelle des chaînes de télévision depuis le fournisseur câble 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------ Si les chaînes précédemment enregistrées doivent être gardées dans la liste des chaînes et les nouvelles chaînes détectées doivent leur être ajoutées, appuyez sur »« (vert). 7 7 Si »« (rouge) est appuyé, les chaînes enregistrées seront supprimées de la liste des chaînes en cours. – Le menu »Recherche numérique« s'affiche, et la recherche des chaînes TV débute.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Mise à jour automatique du service Recherche des chaînes de télévision analogiques Si cette fonction est activée, les changements possibles d'opérateurs de réseau sont mis à jour automatiquement. Ce réglage n'est nécessaire que si vous ne recevez pas de chaînes numériques et n'avez pas réalisé de recherche analogique au cours de l'installation initiale. L'unité doit être placée sur le mode veille.
RÉGLAGESSPÉCIAUX------------------------------------------------------------------------------7 Remarques: Après avoir démarré la recherche, une demande de sécurité s’affiche. Appuyez sur »« (vert) pour confirmer l’option »Oui«. – Toutes les chaînes et listes de favoris pour les chaînes analogiques seront supprimées et rassemblées à nouveau. – Le menu »Recherche analogique« s'affiche, et la recherche des chaînes TV débute.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Modification des chaînes analogiques enregistrées Si des chaînes étaient enregistrées avec la recherche automatique de chaîne pendant le réglage des canaux de télévision, vous pouvez les supprimer. Vous pouvez également modifier ou saisir le nom d’une chaîne ou bien ignorer des chaînes. Sélection de la liste des chaînes 1 Ouvrez le menu à l’aide de la touche »MENU«.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Création d'une liste de favoris – chaînes analogiques Vous pouvez sélectionner vos chaînes préférées et les enregistrer dans quatre listes au maximum (FAV1 à FAV4). 1 Dans le menu »Éditeur de chaîne«, sélectionnez les chaînes que vous voulez ajouter dans la liste de favoris à l’aide des touches »V«, »Λ«, »<« ou »>«, et surlignez la chaîne de télévision en appuyant sur »OK«. –La chaîne est marquée d’une coche »✔«.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Activez et désactivez HbbTV Cette option permet de désactiver la fonction Hbb TV, ainsi les avertissements ne sont pas affichés sur les chaînes avec la fonction Hbb TV. 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Configuration source« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer.
INFORMATIONS---------------------------------------------------------------------------------------------Fiche du produit GRUNDIG 40 VLE 6522 BL Classe d’efficacité énergétique A Taille de l’écran : 102 cm/40 “ Consommation d’énergie : en mode de fonctionnement 60 W / 90 W max.
INFORMATIONS---------------------------------------------------------------------------------------------Informations de service pour les fournisseurs Ce produit est conforme aux directives et aux réglémentations suivantes de l'Union europée- nne : 2006/95/EC sur les équipements électriques en utilisation avec certaines limites de tension. 2004/108/EC Directive concernant la compatibilité électromagnétique.
INFORMATIONS---------------------------------------------------------------------------------------------Dépannage Si les solutions fournies ci-dessous ne vous permettent pas de résoudre le problème, veuillez consultez un revendeur agréé GRUNDIG. Veuillez garder à l'esprit que certains dysfonctionnements peuvent également être causés par les périphériques externes tels que les magnétoscope ou les récepteurs satellite.
INFORMATIONS---------------------------------------------------------------------------------------------Le périphérique DMS ne peut être trouvé Le périphérique DMS n'est pas allumé ou n'est pas en marche Assurez-vous que le périphérique DMS et allumé et en marche. Les connexions du réseau ne sont pas effectuées. Vérifiez les réglages du réseau. Mauvaise qualité de l'image (pixel) en mode WLAN.