CONTENTS----------------------------------------------------------------------------------------------------------------------------------3 SET-UP AND SAFETY 4 4 4 5 GENERAL INFORMATION Special features of your television Receiving digital stations Important notes on environmental protection 6 6 CONNECTION/PREPARATION Connecting the antenna and the mains cable Inserting batteries in the remote control 7 8 8 10 11 12 12 13 OVERVIEW Connections and conkrols on the television The remote control - mai
SET-UP AND SAFETY-----------------------------------------------------------------------------------------------Please note the following information when setting up your television set. This television set is designed to receive and display video and audio signals. Any other use is expressly prohibited. 7 Clean the screen with a soft, damp cloth. Only use plain water. 7 Clean the cabinet of your LCD television with the enclosed cloth. Only use plain water.
GENERAL INFORMATION--------------------------------------------------------------------------Special features of your television Your television set enables you to receive and watch digital stations (via DVB-T and DVB-C), including in High Definition (HD). At present, reception for these digital television stations in High Definition is only possible in some countries in Europe.
GENERAL INFORMATION--------------------------------------------------------------------------Important notes on environmental protection The television is not fully disconnected from the power supply when it is switched off with the standby button on the remote control or on the television. 7 If you do not intend to use your television for a few days, disconnect the power plug from the socket. This way the television does not consume any electricity.
CONNECTION/PREPARATION---------------------------------------------------------Connecting the antenna and the mains cable 2 1 For terrestrial digital stations (DVB-T) plug the cable of the rooftop, indoor antenna (passive or active indoor antenna with its own power supply) into the antenna socket »ANT IN« on the television set; or for digital stations of the cable TV network (DVB-C) plug the antenna cable into the antenna socket »ANT IN« on the television set; or for analogue stations plug the antenna cab
CONNECTION/PREPARATION---------------------------------------------------------Inserting batteries in the remote control Environmental note This symbol on the battery or on the packaging indicates that the battery should provided vith this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.
OVERVIEW---------------------------------------------------------------------------------------------------------------------------------Connections and conkrols on the television AV1 COMPONENT Y Pb Pr L R SPDIF E uro/AV socket (FBAS signal, RGB signal). Video ideo signal input for V camcorder. L R udio signal input for A camcorder. udio output sockets (coA axial) for PCM/AC3 signals. For connecting to a digital multi-channel audio/video amplifier or AV receiver.
OVERVIEW---------------------------------------------------------------------------------------------------------------------------------8/I witches the television on S and back into standby. The only way to disconnect the television from the mains supply is to pull the plug. V– V + djust the volume. A Select menu functions. MENU Opens the main menu. Select menu item with »P+« or »P–«. Activate the function with »V+« or »V–«. Set the function with »V+« or »V–«. Switch off the menu with »MENU«.
OVERVIEW---------------------------------------------------------------------------------------------------------------------------------The remote control - main functions witches off the television set S (stand-by). Switches the television on from standby mode; selects channels directly. Opens the pre-selection for AV channels and the USB input. Then selection with »V« or »Λ« and confirm with »●«. ECO Opens the menu. Switches the television on from standby; selects stations step by step.
OVERVIEW---------------------------------------------------------------------------------------------------------------------------------The remote control - all functions v Enlarges the picture. y elect different subtitles (in digital S TV operation). Opens the recorded list. d elect different language (in digital S TV operation). ? isplays the number and name of a D station. ECO ECO mode on/off. CEC elects the repeat function in the file S browser.
SETTINGS---------------------------------------------------------------------------------------------------------------------------------------Searching for television stations The television has an automatic tuning function, which searches for analogue TV channels and digital ones. You start the search and can then sort the television stations into your order of preference.
SETTINGS---------------------------------------------------------------------------------------------------------------------------------------Changing stored channels for digital stations Moving channels to different presets You can change the order of the channels found as required, delete channels you do not need and block access to certain presets (parental control). 1 I n the »Programme Table« menu, press »V« or »Λ« to select the channel to be moved.
SETTINGS---------------------------------------------------------------------------------------------------------------------------------------Deleting channels Picture settings 1 I n the »Programme Table« menu, press »V« or »Λ« to select the channel to be deleted and press » « (yellow) to confirm. 1 Open the menu with »i«. – The »PICTURE« menu is displayed. 2 Press » Notes: 7 Press » 7 PICTURE « (green) to confirm the deletion. Picture Mode « (red) to delete all the channels.
SETTINGS---------------------------------------------------------------------------------------------------------------------------------------Notes: 7 You can only select the »MPEG NR.« function on digital and AV presets. 7 7 7 7 »MPEG NR.« reduces any interference from artefacts (pixel blocks) from digital stations with MPEG compression (such as from DVBT receivers or DVD players). »Dynamic Contrast« the contrast adjusts according to the picture content to ensure optimum contrast.
SETTINGS---------------------------------------------------------------------------------------------------------------------------------------Equaliser The equaliser offers you four preset sound settings (Music, Sports, Movie and Speech) and one which you can create yourself (User). 1 Select »Equalizer« with »V« or »Λ« and confirm with »●«. – The »Equalizer« menu appears. 2 Select the audio setting »User« with »<« or »>« and confirm with »V«. – The frequency band »120 Hz« is activated.
TELEVISION OPERATION-----------------------------------------------------------------------------Basic functions Switching on and off 1 Press »8«, »1…0« or »P+« or »P–« to switch on the device from standby mode. 2 Press the »8« button to switch the television to standby mode. Selecting channels 1 Use »1…0« to select channels directly. 2 Press »P+« or »P–« to move up and down channels. 3 Open the channel list by pressing »●«, select the station with »V« or »Λ«, press »●« to confirm the channel.
TELEVISION OPERATION-----------------------------------------------------------------------------Sound settings 2 Change channels with »1…0« or »Λ« »V«. You can select various audio settings when watching analogue channels. 3 You can now use »Z« to switch between the saved channel and the channel you were watching before. 1 Select »User«, »Speech«, »Movie«, »Sports«, »Music« or by pressing »5«. – You can modify the »User« audio setting – see the “Equaliser” chapter on page 16.
TELEVISION OPERATION-----------------------------------------------------------------------------Changing the picture format »Panorama« format The television automatically switches to the 16:9 format if this format is detected via the Euro-AV socket. This setting is suited to films with a large width/ height ratio. During programmes in 4:3 format the picture is stretched horizontally if the »Panorama« function is selected. The picture geometry is stretched horizontally.
USB RECORDING----------------------------------------------------------------------------------------------------------Information on recording and reproducing television programmes ■ Recording and reproducing programmes, this can only be done with digital television stations (DVB-T and DVB-C). digital television stations (DVB-T and DVB-C) you are able to record and playback also depend on the broadcasting station.
USB RECORDING----------------------------------------------------------------------------------------------------------Connecting external data media 7 7 Notes: Before connecting the data medium, switch the television to stand-by with »8«. Connect the device and then switch the television on again. Before disconnecting the data medium, the television must first be switched to standby, otherwise files can be damaged.
USB RECORDING----------------------------------------------------------------------------------------------------------2 Select »Format« with »V« or »Λ« and press »●« to confirm. – The maximum available memory space on the external data medium is displayed. The system also indicates the length of time for which you can record programmes on the hard drive. Note: 7 If there is other data on your data medium (pictures or MP3 files, for example), these should be saved before formatting.
USB RECORDING----------------------------------------------------------------------------------------------------------Time shift – pausing programmes You can pause the programme you are watching. This is a useful function, for example if the telephone rings while you are watching a film and you do not want to miss anything. A freeze-frame display of the last scene appears on the screen and the programme is recorded in the time shift memory of the external data medium.
USB RECORDING----------------------------------------------------------------------------------------------------------Recording a programme from the channel list 1 Press »●« to open the channel list. 2 Press »V«, »Λ«, »<« or »>« to select the programme and »●« to confirm. 3 Press »i« to exit channel list. 4 Press » « to start recording. – Information on the recording is displayed: the recording symbol, the channel name, the programme, the recording time and the available memory space.
USB RECORDING----------------------------------------------------------------------------------------------------------Editing recording data in the timer menu You can edit the data for programmed timer recordings. 1 Select the timer menu by pressing »TV-G«, » « and » « (yellow) in succession. – The »Timer list« menu is displayed. 2 Select the title of the programme to be edited with »V« or »Λ« and activate the timer position with » « (blue). – The input menu is displayed.
USB RECORDING----------------------------------------------------------------------------------------------------------Sorting or deleting programmes in the recording list You can sort recorded programmes by various criteria (station, channel or time) or delete them from the list. Sorting programmes You can sort programmes in the »Recording list« menu in ascending order of station, channel or time. 1 Select the »Recording list« menu by pressing » «. – The »Recording list« is displayed.
TELETEXT MODE---------------------------------------------------------------------------------------------------------------TOP text or FLOF text mode Increasing character size 1 Press »TXT« to switch to teletext mode. If you have difficulty reading the text on the screen, you can double the character size. 2 Use »1...0« to enter the page number directly or »V« and »Λ« to switch up and down pages. To return to page 100, press »i«.
CONVENIENCE FUNCTIONS-----------------------------------------------------------------5 Select »Close« with »V« or »Λ« and press »●« to confirm. Convenience functions 1 Open the menu with »i«. – The »PICTURE« menu is displayed. 6 Press »i« to end the setting. 2 Select »OPTIONS« with »<« or »>« and press »●« to confirm. Resetting the television to its original state This function enables you to delete the station lists and all custom settings.
PARENTAL CONTROL-------------------------------------------------------------------------------------------Block a television channel 1 Open the menu with »i«. –The »PICTURE« menu is displayed. 2 Select the »Parental control« menu with »<« or »>« and press »●« to confirm. 3 Enter the PIN code »0000« with »1 ... 0«. PARENTAL CONTROL Lock System Off Set PIN s Block Programme Parental Guidance Panel Lock s 4 Z 1 Select »Block Programme« with »V« or »Λ« and press »●« to confirm.
TIMER FUNCTIONS----------------------------------------------------------------------------------------------------1 Open the menu with »i«. – The »PICTURE« menu is displayed. 2 Select the »TIMER« menu with »<« or »>« and press »●« to confirm. TIMER Clock 19 /Jun 2008 14:35 Off Time Off On Time Off Sleep Timer Off Off Time Zone Berlin GMT+1 Z In the »On Time« menu, you can enter a switchon time for the television.
TIMER FUNCTIONS----------------------------------------------------------------------------------------------------Automatic switch-off (Auto Timer) If this function is activated, the television switches off after 5 minutes on stand-by if no video signal is transmitted. 1 Select »Auto Sleep« with »V« or »Λ«. 2 Press »<« or »>« to switch the function »On«. Note: Switch off the function by pressing »<« or »>« to set it to »Off«. 7 3 Press »i« to end the setting.
USB-MODE---------------------------------------------------------------------------------------------------------------------------------The file formats Connecting external data media Your television can be operated via the USB input with the following file formats: Before connecting the data medium, switch the television to stand-by with »8«. Connect the device and then switch the television on again. MP4 video data The MP4 process was designed to compress video files.
USB-MODE---------------------------------------------------------------------------------------------------------------------------------The file browser Switching on automatic preview The file browser displays the data (AVI., JPEG, MP3, MP4 or WMA data) that the external data medium offers. If the automatic preview is switched on, you can see the selected JPEG picture in the main menu of the file browser.
USB-MODE---------------------------------------------------------------------------------------------------------------------------------Note: 7 You can view information on the film by pressing »?«. 7 7 7 For playing MP3 or WMA data, information on the album, track and singer is displayed at the right of the menu. When playing picture data, information about the resolution and the size is displayed at the right of the menu. The file browser is switched off when playing picture data.
USING EXTERNAL DEVICES---------------------------------------------------------------------High definition – HD ready Your television can playback high-definition television signals (HDTV). You can connect the input sources (HDTV set-top box or High Definition DVD player) to the »HDMI« socket (digital HDTV signal). This ensures that you can view digital HDTV programmes, even if they are copy-protected (HDCP High Bandwidth Digital Content Protection).
USING EXTERNAL DEVICES---------------------------------------------------------------------Connecting an external device With a digital audio/video signal Suitable devices: Digital satellite receiver, Playstation, BluRay player, DVD player/recorder, set-top box, notebook, PCs. 7 Video signal: digital video; resolution: standard 576p; HDTV 720p, 1080i, 1080p 7 Audio signal: digital audio (stereo, multi-channel compression, uncompressed). 7 Channel position »HDMI1«, »HDMI2« or »HDMI3«.
USING EXTERNAL DEVICES---------------------------------------------------------------------Using a video recorder, DVD player or set-top box 1 Switch on the video recorder, DVD player or set-top box and select the function you wish to use. 2 Press »AV«, select the input signal channel with »Λ« or »V« (»AV1«, »VIDEO«, »S-VIDEO«, »HDMI1«, »HDMI2«, »HDMI3« or »YPBPR«) and press »●« to confirm. Headphones Connecting the headphones 1 Plug the headphone jack (3.
USING EXTERNAL DEVICES---------------------------------------------------------------------- Connecting a PC 1 Connect the socket »PC-IN« on the television to the corresponding socket on the PC using a VGA cable. 2 Connect the socket »PC Audio« on the television to the corresponding socket on the PC using a cinch cable (audio signal). Note: Adjust your PC to the monitor (for example, picture resolution 1280 x 768, picture frequency 60 Hz).
USING EXTERNAL DEVICES---------------------------------------------------------------------- What is Common Interface? Common Interface (CI) is an interface for DVB receivers. Encoded stations can only be viewed with a CA module suitable for the encoding system and the corresponding smart card. The television set is equipped with a Common Interface slot into which CA modules from various providers can be inserted.
SPECIAL SETTINGS-----------------------------------------------------------------------------------------------------Tuning digital television stations This search deletes all television stations included in the channel list! Tuning all digital television stations with cable connection by auto tuning 1 Open the menu with »i«. – The »PICTURE« menu appears. 2 Select the »CHANNEL SETUP« menu with »<« or »>«.
SPECIAL SETTINGS-----------------------------------------------------------------------------------------------------Tuning the digital television stations with cable connection – by entering the frequency Notes: 7 To make this setting, open the »Station search« menu, go to the »TV connection type« line and select the »Cable« option. 7 Consult your cable operator for the required symbol rate and modulation values. 1 Open the menu with »i«. – The »PICTURE« menu appears.
SPECIAL SETTINGS-----------------------------------------------------------------------------------------------------Tuning analogue television stations These settings are only necessary if you can not receive any digital stations or if you want to retune all analogue channels. The television station can be set directly or using the search. The analogue television stations are listed in the channel list after the digital television stations.
SPECIAL SETTINGS-----------------------------------------------------------------------------------------------------4 Select the »Programme No« by pressing »V« or »Λ« and press »<« or »>« to set the preset. 5 Select »Current Channel« with »V« or »Λ«. 6 Press »●« to choose between »S« (special channel) or »C« (channel). 7 Enter the channel number with »<« or »>« step by step or with »1…0« directly. Note: 7 The current system is displayed in the »System« line.
SPECIAL SETTINGS-----------------------------------------------------------------------------------------------------Sorting television channels Creating a list of favourites 1 In the »Programme Table« menu, select the channel to be moved with with »V«, »Λ«, »,« or »m« . You can select your favourite channels and save them in up to four lists (FAV1 to FAV4). 2 Highlight the channel with » « (green). 3 Select a new channel position by pressing »V«, »Λ«, »,« or »m« and then press »●« to confirm.
INFORMATION-----------------------------------------------------------------------------------------------------------------Displaying signal information (only for digital television channels) 1 Open the menu with »i«. – The »PICTURE« menu appears. 2 Select the menu »CHANNEL SETUP« with »<« or »>«. 3 Select »Signal Information« with »V« or »Λ« and press »●« to confirm. – You will see information on the channel, network, modulation, symbol rate, quality and signal strength.
INFORMATION-----------------------------------------------------------------------------------------------------------------Technical data Service information for dealers Operating voltage: 220-240 V ~ 50-60 Hz The television set may only be operated with the mains adapter supplied. The product complies with the following EU directives: 2006/95/EG directive for electrical equipment to be used within defined voltage ranges. 2004/108/EG directive on electromagnetic compatibility.
INFORMATION-----------------------------------------------------------------------------------------------------------------Troubleshooting If the remedies given below do not work, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers.
INFORMATION-----------------------------------------------------------------------------------------------------------------Additional Information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply. The range of multi-system receivers is built to work in most European countries. However, the mains plug and socket system for the UK differs from many European countries.
