LCD TV 42 VLE 9270 WL EN
Contents------------------------------------------------------------------------------------------------------------------------------------4 Setup AND SAFETY 6 6 7 7 7 General information Special features of your television set Receiving digital channels Important notes on environmental protection Notes on still images 8 8 9 Connection and preparation Connecting the antenna and power cord Inserting batteries into the remote control 10 Overview 10 Connections on the television set 11 Controls on the t
Contents------------------------------------------------------------------------------------------------------------------------------------60 OPERATION USING EXTERNAL DEVICES 60 DIGI LINK 60 The DIGI LINK functions on your television 61 Device operation 62 High definition HD ready 62 Connection options 63 Connecting external devices 64 Using a DVD player, DVD recorder, video recorder or set-top box 64 Headphones 65 Hi-fi system/AV receiver 78 INFORMATION 78 Displaying signal information 79 Technical d
Setup AND SAFETY-----------------------------------------------------------------------------------------------------Please note the following instructions when setting up the television set: This television is designed to receive and display video and audio signals. All other uses are expressly prohibited. 7 The ideal viewing distance is five times the diagonal screen size. 7 Light falling on the screen impairs picture uality.
Setup AND SAFETY-----------------------------------------------------------------------------------------------------Do not connect any other equipment while the device is switched on. Also switch off other equipment before connecting it. 7 Do not plug in the power cord of the device until you have connected the external equipment and the antenna. 7 Make sure the mains plug is freely accessible. 7 Do not expose the batteries to excessive heat such as direct sunlight, fire, etc.
General information--------------------------------------------------------------------------------Special features of your television set You can receive and watch digital TV channels using your television set (via DVB-S, DVB-T and DVB-C) – including High Definition programmes (HD). However, the reception of digital TV channels in HD is currently limited to a few countries in Europe.
General information--------------------------------------------------------------------------------Receiving digital channels You require a satellite antenna to receive igital satellite channels (DVB-S). d Your TV supports SCR system (Satellite Channel Router). If your antenna installation is equipped with an Single Cable Distribution multiswitch, all television sets which are connected on this antenna can receive the television channels stand-alone.
Connection and preparation----------------------------------------------Connecting the antenna and power cord 2 3 1 1 To receive digital satellite channels (DVB-S), connect the satellite antenna cable to the antenna socket »SATELLITE« on the television set. Note: When connecting an indoor antenna you may have to try it out at different positions until you get the best reception.
Connection and preparation----------------------------------------------Inserting batteries into the remote control Environmental note 7 This symbol on rechargeable batteries/batteries or on the packaging indicates that the rechargeable battery/battery may not be disposed of with regular household rubbish. For certain rechargeable batteries/batteries, this symbol may be supplemented by a chemical symbol.
Overview------------------------------------------------------------------------------------------------------------------------------------Connections on the television set AV1 / S-VHS COMPONENT Y Pb Pr L R Optic Out 10 ENGLISH CART socket (CVBS signal, S RGB signal); Video and sound socket for S-Video camcorder. Sockets for video input (YUV signal). Sockets for audio input (YUV signal). ocket for audio output S (optical) for PCM/AC3 signals.
Overview------------------------------------------------------------------------------------------------------------------------------------HDMI2 (ARC) DMI socket, H audio/video input. HDMI3 HDMI socket, audio/video input. HDMI4 HDMI socket, audio/video input. USB2 (HDD) SB socket for external U data media and PVR function. LAN etwork cable connection N socket. U eadphone jack (3.5 mm H jack plug); Sockets for audio output.
Overview------------------------------------------------------------------------------------------------------------------------------------The remote control – Main functions Switches on from standby; Selects channel – directly. elects the channel list S (»All«, »FAV 1« to »FAV 4«). Switches on and off (Standby). witches between S teletext and TV mode. Opens the 3D menu. Displays information. Opens the main menu. Opens the channel list.
Overview------------------------------------------------------------------------------------------------------------------------------------The remote control – All functions @ ! F reeze frame, if no external data medium is connected; Playback pause; Time shift mode (only for digital television channels and when an external data medium is connected); Pauses the file being played in DLNA and vTuner menu.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Initial set-up and tuning television channels Selecting language, country and operating mode The television set is equipped with automatic channel search, which searches for satellite channels (DVB-S), terrestrial channels (DVB-T), cable channels (DVB-C) and analogue channels. 1 Switch on the television set from standby with »8«, »1…0« or »P+« or »P-«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Tuning the television channels from satellite (DVB-S) Advanced installation You have two options for tuning digital satellite channels. 1 In the »Source Setup« menu, in the »Connection Type« line, select the option »Satellite« with »<« or »>«. A The easy installation, which pre-configures all antenna settings for the satellite channels on Astra 19.2° East.
Settings-----------------------------------------------------------------------------------------------------------------------------------------6 Select the line »DISEqC Mode« with »V« or »Λ«. Select »DiSEqC 1.0« or »DiSEqC 1.1« in accordance with the existing antenna system with »<« or »>«. – DiSEqC 1.0 allows up to four satellites to be received simultaneously. – DiSEqC 1.1 allows up to 16 satellites to be received simultaneously. 7 Select the line »LNB Selection« with »V« or »Λ«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Tuning terrestrial television channels (DVB-T) Tuning television channels from the cable provider (DVB-C) 1 In the »Source Setup« menu, in the »Connection Type« line, select the option »Air« with »<« or »>«. 1 In the »Source Setup« menu, in the »Connection Type« line, select the option »Cable« with »<« or »>«. 2 Select the line »Scan Type« with »V« or »Λ«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Changing the program table for the digital channels Selecting channel lists Channels which are found using the scan are saved in the »PROGRAM TABLE«. 2 Select the »SOURCE SETUP« menu with »V« or »Λ« and press »OK« to confirm. – The »SOURCE SETUP« menu appears.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Deleting channels Skipping channels 1 In the »PROGRAM TABLE« menu, select the Edit mode by pressing »« (red). You can mark television channels which should be skipped when selecting with »Λ« or »V«. It is still possible to select them using the number buttons.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Note: 7 Channels can also be deleted from the favourites lists. Select the channel to be deleted with »V«, »Λ«, »<« or »>« and press »OK« to delete it. 7 When deleting a channel from the favourites list, the order within the favourites list will be updated. 4 Quit the program table with »MENU«.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Picture settings 1 Open the menu with »MENU«. 2 Select the menu item »PICTURE SETTINGS« with »V« or »Λ« and press »OK« to confirm. – The »PICTURE SETTINGS« menu appears. PICTURE SETTINGS 20.09.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Sound settings Automatic volume 1 Open the menu with »MENU«. Television stations broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels. 2 Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to confirm. – The »SOUND SETTINGS« menu appears. 20.09.
Settings-----------------------------------------------------------------------------------------------------------------------------------------Soundeffects Equalizer This menu offers three preset sound effects (Music, Natural and Speech) and one setting to be created by you (User). Equalizer offers a sound setting ”User” that you can create. 1 Select the line »Sound Preset« with »V« or »Λ«. 2 Select the sound effect »Music«, »Natural« or »Speech« by pressing »<« or »>«.
Television - OPERATION-------------------------------------------------------------------------------Basic functions Displaying information Switching on and off 1 Display information, press »?« repeatedly. – The display disappears automatically after a short while. 1 Press »8«, »1…0« or »P+« or »P-« to switch on the television from standby mode. 2 Press »8« to switch the television to standby. Selecting channels 1 Press »1…0« to select presets directly.
Television - OPERATION-------------------------------------------------------------------------------Audio settings Zoom function Various audio settings are available. This function allows you to enlarge the picture as required. 1 Open the Tools menu with »TOOLS«. 2 Select the menu item »Sound Preset« with »V« or »Λ«. 3 Select the audio setting »User«, »Music«, »Natural« or »Speech« by pressing »<« or »>«. – You can change the »User« audio setting – see the “Soundeffects” chapter on page 23.
Television - OPERATION-------------------------------------------------------------------------------Zapping function Electronic TV guide This function remembers the channel you are currently watching while you switch over to other ones (zapping). The electronic TV guide provides an overview of all programmes that will be broadcast in the next week (for digital channels only). 1 Press »1…0« or »P+«, »P–« to select the channel to be stored in the zapping memory and press »<« to confirm.
Television - OPERATION-------------------------------------------------------------------------------Changing the picture format »Panorama« format The television automatically switches to the 16:9 format if this format is detected via the SCART socket. This setting is suitable for films in an especially wide format. 1 Open the Tools menu with »TOOLS«. 2 Select the menu item »Picture Format« with »V« or »Λ« and press »OK« to confirm. 3 Select the picture format with »<« or »>« and press »OK« to confirm.
3D FUNCTION------------------------------------------------------------------------------------------------------------------------Important information about the 3D function 7 7 7 7 7 7 7 7 Keep a sufficient distance from the television. The optimum distance is three times the height of the screen. Watching 3D films from a close distance for a long time could impair your vision. Never use the 3D function for longer than 3 hours without a break.
3D FUNCTION------------------------------------------------------------------------------------------------------------------------1 Open the »Select Source« menu with » «. 2 Select the source (digital channel or suitable input) that will be played in 3D with »<«, »>«, »V« or »Λ« and confirm with »OK«. 3 Open 3D menu with »3D« button and use »<«, »>« button to select »Side by Side«, »Top Bottom« or »2D → 3D« option according to the content to be played and confirm with »OK«.
3D FUNCTION------------------------------------------------------------------------------------------------------------------------Adjusting 2D → 3D effects Formats supported by HDMI 1.4 When you change 2D broadcasting to 3D, you can adjust the most suitable effect depending on your personal preferences. With HDMI 1.4, your TV can recognise and play 3D content. 1 Select »Effect mode« with »V« or »Λ« and set it to »On« with »<« or »>«. – »3D Perspective« and »Depth« options are activated.
SMART Inter@ctive TV AND HOME NETWORKWhat is Smart Inter@ctive TV Wired network Smart Inter@ctive TV provides your television with internet services and pages when connected to internet. Wired network connection Through Interactive TV feature you can run many local and global internet applications.
SMART Inter@ctive TV AND HOME NETWORKWired network settings There are two ways of making the wired network settings. A Automatic wired network connection, all connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically. B Manual wired network connection, all connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) must be configured manually. Automatic wired network connection Most of the home networks are Dynamic.
SMART Inter@ctive TV AND HOME NETWORKManual connection Certain networks require Static IP address. If your network requires a Static IP address, you must enter the »IP Address«, »Netmask«, »Gateway« and »DNS« values manually. You can obtain your »IP Address«, »Netmask«, »Gateway« and »DNS« values from your Internet Service Provider (ISP). 1 Open the menu with »MENU«. 2 Select the line »INTER@CTIVE TV« with »V« or »Λ« and press »OK« to confirm. – The »INTER@CTIVE TV« menu appears.
SMART Inter@ctive TV AND HOME NETWORKWireless network connection Notes: 7 7 7 1 Television includes a built-in Wireless WiFi Adapter to connect it to wireless network. Note: 7 Apart from the built-in WiFi adapter on TV, external WiFi adapter can be connected to »USB1« and »USB2 (HDD)« inputs. 7 7 7 7 34 ENGLISH The GRUNDIG Wireless WiFi Adapter supports IEEE 802.11 B/G and N communication protocols. We recommend you to use IEEE 802.11N protocol to obtain the best performance in HD video playback.
SMART Inter@ctive TV AND HOME NETWORKWireless network settings There are two ways of making the wireless network settings. A Automatic connection, »Apart from Access Point Selection, all data regarding the connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically. B Manual connection, all connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) must be configured manually. Automatic connection Most of the home networks are Dynamic.
SMART Inter@ctive TV AND HOME NETWORKManual connection Certain networks require Static IP address. If your network requires a Static IP address, you must enter the »IP Address«, »Netmask«, »Gateway« and »DNS« values manually. You can obtain your »IP Address«, »Netmask«, »Gateway« and »DNS« values from your Internet Service Provider (ISP). 1 Open the menu with »MENU«. 2 Select the line »INTER@CTIVE TV« with »V« or »Λ« and press »OK« to confirm. – The »INTER@CTIVE TV« menu appears.
SMART Inter@ctive TV AND HOME NETWORKSmart Inter@ctive TV internet applications Smart Inter@active TV applications provide internet services to your television. These applications are designed according to your television. With the Smart Inter@active TV feature you can access many local and global internet applications.
SMART Inter@ctive TV AND HOME NETWORKSmart İnter@ctive browser main menu 1 Application gallery 1 2 Selected applications 2 3 Description of the application 4 Live picture from the current TV channel 5 Submenü for selecting the different categories. Selected Application A Aplication information 4 KATEGORIE A All Social&Fun Health&Life News&Video 5 3 Press OK to Enter Exit Back Navigation in the main menu 1 Select the desired application with »V«, »Λ«, »<« and »>« and press »OK« to confirm.
SMART Inter@ctive TV AND HOME NETWORKPlayback the video, music and image files with home network connection With DLNA menu of your television, you can easily access Video, music and photo files on server; and thanks to DMR feature, you can automatically start and stop media playing on devices with DMC feature. Notes: 7 You can share your videos, music or photographs via devices such as a PC, Mobile Phone or NAS (Network Attached Storage) functioning as a DLNA compatible DMS (Digital Media Server).
SMART Inter@ctive TV AND HOME NETWORKStart playback vTuner internet radio 1 In the content of the DMC device select the required folder with »V«, »Λ«, »<« or »>« and confirm with »OK«. – All titels appears. Many radio stations broadcast through the internet. vTuner allows you to access many popular radio stations on earth. Thanks to the vTuner function of your television, you can display a list that contains many radio stations, and select and listen to the desired stations based on your tastes.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Information on recording and playing television programmes Possible limitations when using an external data medium ■ Recording Depending on the broadcaster, you may experience various restrictions on some of the functions from some television channels. and playback of television programmes is only possible with digital television channels (DVB-S, DVB-T and DVB-C).
USB RECORDING- ------------------------------------------------------------------------------------------------------------Connecting external data media Notes: 7 Before connecting the data medium, switch the television to standby with »8«. Connect the device and then switch the television on again. 7 Before removing the external data medium, the television must be switched to standby, so that no data loss occurs. Your television features two USB sockets, »USB1« and »USB2 (HDD)«.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Switching on automatic preview Testing the external data medium If the automatic preview is switched on, a preview of the selected file appears in the file browser. You can subject external data media to a test and establish whether they are suitable for the chosen functionality. 1 Select the line »Auto Preview« with »V« or »Λ«. 1 Select the line »Disk« with »V« or »Λ«.
USB RECORDING- ------------------------------------------------------------------------------------------------------------″Pausing” time shift programmes You can pause the programme you are watching. This is a useful function, for example if the telephone rings while you are watching a film and you do not want to miss anything. A freeze-frame display of the last scene appears on the screen and the programme is recorded in the time shift memory of the external data medium.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Recording a programme from the channel list Presetting programmes to be recorded 1 Open the »CHANNEL LIST« with »OK«. ... using the electronic TV guide 2 Select a television channel with »V«, »Λ«, »<« or »>« and press »OK« to confirm. You can use data from the electronic TV guide for recording. 3 Press »MENU« to exit the channel list.
USB RECORDING- ------------------------------------------------------------------------------------------------------------... by manual data entry You can preset up to 25 programmes for timer recording. 1 Press »GUIDE« to display channel information. – The electronic TV guide appears. 2 Open the »MAKE SCHEDULE« menu by pressing »« (yellow) twice. 3 Select the line »Type« with »V« or »Λ« and select the option »Recording« with »<« or »>«.
USB RECORDING- ------------------------------------------------------------------------------------------------------------Playback The recorded programmes – whether started manually or using the timer function – are stored on the external data medium. You can open the archive on the external data medium by pressing »REC.LIST«. Selecting a programme from the archive 1 Open the »Recorded Event« menu with »REC.LIST«. – The menu appears.
USB OPERATION---------------------------------------------------------------------------------------------------------------File formats Image data Your television can work with the following file formats using the USB sockets: Your television can display pictures in the formats JPEG, PNG and BMP. JPEG stands for Joint Picture Experts Group. It denotes a process for compressing picture files. PNG and BMP are process used to save image data with no, or very little, losses.
USB OPERATION---------------------------------------------------------------------------------------------------------------Connecting external data media Before connecting the data medium, switch the television to standby using »8 «. Connect the device and then switch the television on again. Before removing the external data medium, the television set must be switched to standby, so that no data loss occurs.
USB OPERATION---------------------------------------------------------------------------------------------------------------The file browser Settings in the USB setup menu The file browser displays video, audio and picture files stored on external data media. Selecting the menu If an external data medium contains files in different formats, you can, when necessary, filter out the formats not required.
USB OPERATION---------------------------------------------------------------------------------------------------------------DivX® VOD Basic playback functions You must have your device registered in order to play the protected video that you will buy from DivX®. 1 Select the data medium by pressing » «, use »V«, »Λ«, »<« or »>« to select the option »USB« and press »OK« to confirm. – The file browser appears. 1 Select »DivX® VOD« with »V« or »Λ« and confirm with »OK«. – Registration Code appears.
USB OPERATION---------------------------------------------------------------------------------------------------------------Notes: 7 Use »Λ« to select »Up Folder«, when you would like to return to the last folder. Use »Root« (and then press »OK«) to return to the main folder. It is possible that files which are actually supported do not function correctly in USB mode. This is because certain files are not recorded with standardised compression processes, although they feature the “right” file ending.
USB OPERATION---------------------------------------------------------------------------------------------------------------Selecting a track or picture in steps (SKIP) 1 During playback, select the next track/ picture with »6«. 2 During playback, select the previous track/ picture with »5«. – Playback begins with the track or picture you selected. Selecting a certain passage for playback (video files only) 1 During playback, press »OK«.
Teletext OPERATION----------------------------------------------------------------------------------------------TOP text or FLOF text mode Enlarging the character height 1 Press »TXT« to switch on teletext. If you have difficulty reading the text on the screen, you can increase the character height. 2 Select teletext pages directly with »1...0« or step by step with »V« and »Λ«. Return to teletext page 100 with »?«.
INTERACTIVE PORTAL (HbBTV)--------------------------------------------------------------What is HbbTV? The ARD offering includes, for example, a detailed programme overview, the full offering of "Das Erste1Mediathek” as well as graphical restructured teletext with high-definition pictures. The ZDF offering includes the "ZDF mediathek" and other programme information (as of September 2011). The HBBTV Service is only available in some countries.
Convenience functions------------------------------------------------------------------------Opening the SETTINGS menu Changing the audio language 1 Open the menu with »MENU«. (only for digital television channels) 2 Select the »SETTINGS« menu with »V« or »Λ« and press »OK« to confirm. – The »SETTINGS« menu appears. You can define a primary and a secondary audio language. 20.09.
Convenience functions------------------------------------------------------------------------Setting the date and time Timer settings Automatic setting Entering the switch-off time (sleep timer) Your television set detects the difference in time to Greenwich Mean Time (GMT) automatically, as long as the channel selected transmits a time signal. 1 Select the line »Date & Time« with »V« or »Λ« and press »OK« to confirm. In the »Sleep Timer« menu you can enter a time for the television to switch off.
Convenience functions------------------------------------------------------------------------6 Select the line »Volume« with »V« or »Λ« and use »<« or »>« to set the volume. 7 Select the line »Set Hour« with »V« or »Λ« and enter the time with »1…0«. 8 Save the data with »« (green). Note: 7 You can abort the entry by pressing »« (red). 9 Press »MENU« to end the setting. Switch-off timer In the »Auto Off« menu, you can enter a time for the television to switch off.
Convenience functions------------------------------------------------------------------------Changing the PIN code Updating software (OAD) You can also enter a personal PIN code instead of the default code »1234«. Please take note of your own PIN code. (from satellite, for digital channels only) 1 Select »Set PIN« with »V« or »Λ« and press »OK« to confirm. 2 Enter the current PIN code 1 2 3 4 with »1 ... 0«. 3 Enter your new four digit PIN code with »1 ... 0«.
OPERATION USING EXTERNAL DEVICES-----------------------------DIGI LINK Your television is equipped with the DIGI LINK function. This function uses the CEC (Consumer Electronics Control) protocol. CEC allows external devices which are connected to the »HDMI« sockets by an HDMI cable (e.g. DVD player) to be operated with a remote control. Prerequisite is that the devices connected support CEC. Read the operating manual for the external device to find out how to activate the corresponding function.
OPERATION USING EXTERNAL DEVICES-----------------------------Device operation Switching the device to standby You can decide whether external devices should react to your television's remote control. This option switches the external device to standby. «, use »V«, »Λ«, »<« or »>« to 1 Press » select the preset »HDMI1« to »HDMI4« and press »OK« to confirm. «, use »V«, »Λ«, »<« or »>« to 1 Press » select the preset »HDMI1« to »HDMI4« and press »OK« to confirm. 2 Open the menu with »MENU«.
OPERATION USING EXTERNAL DEVICES-----------------------------High definition HD ready Connect the corresponding input sources (e.g. HDTV receiver or HD-DVD player) to the »HDMI« sockets (for digital HDTV sources). This ensures that you can view digital HDTV programmes, even if they are copy-protected (HDCP High Bandwidth Digital Content Protection), without encountering problems.
OPERATION USING EXTERNAL DEVICES-----------------------------Connecting external devices ... with digital audio/video signals Suitable devices: Digital satellite receivers, Playstation, BluRay player, DVD player/ recorder, set-top box, notebook, PCs. 7 Video signal: Digital video; resolution: standard 576p; HDTV 720p, 1080i, 1080p. 7 Audio signal: digital audio (stereo, multi-channel compression, uncompressed). 7 Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or »HDMI4«.
OPERATION USING EXTERNAL DEVICES-----------------------------... with an analogue TV signal Suitable devices: Digital satellite receiver, DVD player/recorder, set-top box, camera recorder. 7 Video signal: CVBS. 7 Audio signal: stereo, analogue. 7 »AV2« preset. 7 1 Connect the »Video« socket on the television to the corresponding socket of the external device with an RCA cable (video signal).
OPERATION USING EXTERNAL DEVICES-----------------------------Hi-fi System Connecting digital multi-channel amplifier/AV receiver With this connection, you can playback the audio signal of the television channel via the HDMI cable sur the multi-channel amplifier or the AV receiver. 1 Connect the »HDMI2 (ARC)« (HDMI 1.
OPERATION USING EXTERNAL DEVICES-----------------------------Playing the audio signal via the HiFi system 1 Connect the »AUDIO OUT L R« sockets on the television to the corresponding socket of the AV receiver with an RCA cable (digital audio signal). Note: If this function is not activated, the audio signal is transmitted to the HiFi system/AV receiver (connected to »AUDIO OUT L R«). 7 1 Open the menu with »MENU«. 2 Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to confirm.
OPERATION AS A PC MONITOR---------------------------------------------------------- Connecting a PC 1 Connect the »PC-IN« socket on the television to the corresponding socket on the PC using a VGA cable (video signal). 2 Connect the »Audio« socket on the television to the corresponding socket on the PC using a suitable cable (audio signal). Note: 7 Adjust your PC to the monitor (for example, picture resolution 1280 x 768, picture frequency 60 Hz). 20.09.
Operation with a Common Interface------------------ What is a Common Interface? Common Interface (CI) is an interface for DVB receivers. 7 Encrypted channels can only be viewed with a CA module suitable for the encryption system and in conjunction with the corresponding smart card. 7 The television set is equipped with a Common Interface slot into which CI modules from various providers can be inserted.
Special settings---------------------------------------------------------------------------------------------------------Searching for digital television channels from a satellite automatically Satellite data changes frequently, new channels are constantly being added. You should therefore perform an automatic search from time to time. This searches all transponders for new channels. 1 Open the menu with »MENU«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.
Special settings---------------------------------------------------------------------------------------------------------Searching for digital television channels from a satellite manually If you know the parameters of a new television channel, you can also search for it manually. Current transponder data can be found in the teletext, in satellite TV magazines or on the Internet. 1 Open the menu with »MENU«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.
Special settings---------------------------------------------------------------------------------------------------------» KB Frequency (MHz)«: Enter the user band frequency assigned to the user band with »1...0« buttons. » LNB Selection«: If more than one satellites are used in the current SCR system, select »1/2« to»2/2« for the satellite corresponding to the relevant positions using »<« or »>« buttons. Notes: Use installation equipment supported / suggested by your Multiswitch.
Special settings---------------------------------------------------------------------------------------------------------User mode Expert mode You can adjust the alignment of the satellite antenna to each individual satellite. These settings will be saved so that the antenna can later be easily guided to each saved alignment. You can restrict the antenna's range or reset the antenna. 1 Select the line »User mode« with »V« or »Λ« and press »OK« to confirm. – The »USER MODE« menu appears.
Special settings---------------------------------------------------------------------------------------------------------Searching for television channels from the cable provider automatically 1 Open the menu with »MENU«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm. – The »SOURCE SETUP« menu appears. 3 Select the line »Source« with »V« or »Λ« and press »OK« to confirm. Select the option »Cable« with »<«, »>«, »V« or »Λ« and press »OK« to confirm.
Special settings---------------------------------------------------------------------------------------------------------Searching for television channels from the cable provider manually Searching for digital terrestrial TV channels automatically 1 Open the menu with »MENU«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm. – The »SOURCE SETUP« menu appears. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm. – The »SOURCE SETUP« menu appears.
Special settings---------------------------------------------------------------------------------------------------------6 Select the line »Scan Typ« with »V« or »Λ« and set the option »DTV« with »<« or »>«. 7 Start the scan with »« (red). – All channel and favourites lists will be deleted and compiled anew. Note: After starting the scan, a security query will appear. Press »« (green) to confirm the option »Yes«. 7 – The »Reults« menu appears, and the scan for TV channels begins.
Special settings---------------------------------------------------------------------------------------------------------Tuning analogue television channels This setting is only necessary if you cannot receive any digital channels and you have not carried out an analogue search during initial setup. The television channels can be set directly or using the scan. 4 Select the line »Automatic Channel Search« with »V« or »Λ« and press »OK« to confirm.
Special settings---------------------------------------------------------------------------------------------------------Tuning the television channels by entering the channel numbers 1 Open the menu with »MENU«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm. – The »SOURCE SETUP« menu appears. 3 Select the line » Analogue Manual Tuning« with »V« or »Λ« and press »OK« to confirm. – The menu appears.
Special settings---------------------------------------------------------------------------------------------------------Entering channel names (8 digit maximum) 1 In the »PROGRAME TABLE« menu, select the television channel with »V «, »Λ«, »<« or »>« and press »« (red) to confirm. 2 Open the input keyboard with »« (green). Note: 7 If necessary, delete the current channel name. To do this, select the » « button with »<« or »>« and delete repeatedly using »OK«.
INFORMATION---------------------------------------------------------------------------------------------------------------------Displaying signal information (for digital channels only) 1 Open the menu with »MENU«. 2 Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm. 3 Select the line »Signal Information« with »V« or »Λ« and press »OK« to confirm. – Information on the channel, network, modulation, symbol rate, quality and signal strength is displayed.
INFORMATION---------------------------------------------------------------------------------------------------------------------GRUNDIG 42 VLE 9270 WL Technical data Operating voltage: 220–240 V,~, 50–60 Hz Power consumption: On mode 69 W Standby <0.
INFORMATION---------------------------------------------------------------------------------------------------------------------Service information for dealers Only operate the television with the power supply/power cord provided. The product complies with the following EU directives: Power consumption values and classes are specified according to the regulations 2009/642 and 2010/1062 and the standards EN62087 and EN62301 as per European Union framework directives 2009/125/EC and 2010/30/EU.
INFORMATION---------------------------------------------------------------------------------------------------------------------Troubleshooting If the information provided below does not help, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers.
INFORMATION---------------------------------------------------------------------------------------------------------------------Problem Possible cause Remedy Low image quality (pixel) in WLAN mode Signal is lost based on structural conditions. Place the modem so that the signal to the television is not interrupted. Internet connection speed low. Low Internet speed is a problem that is related with the speed of your subscription or a failure in the Internet infrastructure.