Installation guide
ENGLISH
22
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Sound settings
1 Open the menu with »MENU«.
2 Select the menu item »SOUND SETTINGS«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
– The »SOUND SETTINGS« menu appears.
Volume
10
Balance
Sound Mode
SRS SSHD
SRS Sound Preset
Night Mode
Headphone
Audio Output Setup
Sound Type
Stereo
Speech
Off
20
End
Back
SOUND SETTINGS
External
20.09.2010
15:46
Note:
7
Additional operations are explained in the
following sections.
Volume
1 Select the line »Volume« with »
V
« or »
Λ
«
and change the setting with »
<
« or »
>
«.
Balance
1 Select the line »Balance« with »
V
« or »
Λ
«
and change the setting with »
<
« or »
>
«.
Automatic volume
Television stations broadcast at different vol-
umes. The automatic volume limiting (AVL) func-
tion means the volume is kept the same when
you switch between channels.
1 Select the line »AVL« with »
V
« or »
Λ
« and
select the option »On« with »
<
« or »
>
«.
Note:
7
If the »SRS SSHD« setting has been selected
in the »Audio Mode« line, the AVL line can-
not be selected.
Stereo/two channel sound, mono
If the device receives two-channel-sound pro-
grammes, e.g. a film with the original soundtrack
on audio channel B (display: »Dual II«) and
the dubbed version on sound channel A (dis-
play: »Dual I«), you can select the audio channel
you prefer.
If the device receives stereo or Nicam pro-
grammes, it switches automatically to stereo
sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo
sound quality is poor.
1 Select the line »Audio Type« with »
V
« or
»
Λ
« and adjust the setting with »
<
« or »
>
«.
Night Mode
Night Mode prevents fluctuations and sudden
increases in volume.
1 Select the line »Night Mode« with »
V
« or
»
Λ
«.
2 Activate ( »On«) or deactivate the night
mode by pressing »
<
« or »
>
«.
Note:
7
»Night Mode« appears in menu if »SRS
SSHD« has been selected in »Sound
Mode«.