Operation Manual

49
ENGLISH
Recording a programme from the
channel list
1 Open the »CHANNEL LIST« with »OK« .
2 Select a television channel with »
V «, » Λ «,
»
<
« or »
>
« and press »OK« to confirm.
3 Press »MENU« to exit the channel list.
4 Press »
« to start recording.
– Information on the recording is displayed:
the recording symbol, the channel name,
the programme, the recording time and the
available memory space.
– After a short time this information disap-
pears.
5 Press »
7« to stop recording.
6 Confirm the display with »

« (green);
or
press »

« (red) to continue the recording.
Presetting programmes to be
recorded
... using the electronic TV guide
You can use data from the electronic TV guide
for recording.
25 programmes can be preset for the timer
recording or as a reminder.
1
Press »GUIDE« to display channel informa-
tion.
– The electronic TV guide appears.
2
Select the preferred channel with » V «
or »
Λ «.
3 Switch to the information about the current
programme with »
>
«.
4 Select the programme of your choice with
»
V « or » Λ «.
5 Confirm the programme with »
«.
– The symbol »
« appears after the name
of the programme, and the data has been
added to the timer.
Note:
7
If the data for the recording is to be changed,
use
»

« (yellow) and »

« (blue) to
switch to the »SCHEDULED EVENTS«, press
»

« (green) , change the data and save it with
»

« (green) .
6 Press »MENU« to exit the menu.
Notes:
7
Before the timer recording begins, a warn-
ing message appears with a 20-second
countdown. You can switch over to the pro-
grammed television channel.
7
If the timer recording starts during playback,
playback is not interrupted: Recording takes
place automatically in the background as
long as you do not select »Yes« when the
timer countdown message is shown.
Set the lead/follow-up time
With this function you can change the recording
time set by the electronic TV guide.
If you think that a program will start a few min-
utes earlier or will end several minutes later, you
can „add“ up to 60 minutes to this time
1 Display channel information with »GUIDE«.
2 Switch to the timer function with »

«
(yellow) and then select the »Personel
recording time edit« menu with »

« (green).
3 Change the start time with »
<
« or »
>
«.
4 Use »
V « to switch to the »End« row and
change the end time with »
<
« or »
>
«.
5 Save the setting with »

« (green).
6 Switch off the program information with
»GUIDE«.
USB RECORDING
--------------------------------------------------------------------------------------------------------------