COLOUR TELEVISION AMIRA26HDBLK ENGLISH
Contents Important considerations to follow:...................................4 The features of your new television: .................................5 Safety warnings: ..................................................................6 Start:......................................................................................7 Connecting the antenna ........................................................7 Powering on your set and the initial use ................................7 Batteries...............
Important Information The LCD display panels are manufactured using an extremely high level of precision technology, however sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction. Cleaning the screen and the cabinet... After turning off the power, clean the screen and the cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal...
Your Television We would like this product, which has been manufactured in modern facilities in accordance with total quality principles, to offer you the best performance. Therefore, we would like you to read this entire manual carefully before you use your product and keep it for future reference.
For your security This device was designed and manufactured in line with international standards of security. However, it is required to be careful for obtaining the best results and ensuring security as in every electrical appliance. Hence, please read the following information for your own security. This information is for general purposes, it has been prepared to provide you with assistance concerning all the electrical products and some of them might not be related to the products you have purchased.
Start Remove your television carefully out of its box. You can keep the package of your television to use it later on. Contents of the box • • • • 7 Accessory box Power cable Remote Control 2 batteries Note: The Scart, , HDMI, VGA and RCA cables are not supplied with the device. Antenna connection 3.Press the Network power on/off button located on the LCD TV. The Stand-by display of your TV will be blue.
Your Television S-VHS V L AV-3 R 11 SCART 2 12 SCART1 V R ANT IN L AV-OUT L AUDIOR Y Pb Pr DVI-D COMPONENT VIDEO INPUT HDMI PCIN PC-DVI AUDIO-IN 13 10 1 3 4567 89 2 14 S-VHS V 15 16 SPDIF L ANT IN L AV3 AUDIO-OUT 17 L AUDIO R Y Pb COMPONENT VIDEO INPUT Pr HDMI PC-IN PC AUDIO-IN 29 30 18 R 19 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Remote Control 1 2 PAT 3 4 25 PIP SEL. PIP POS. PIP SIZE AV PC TV 5 6 7 23 24 26 27 28 1 2 3 4 5 6 7 8 9 0 SWAP ZOOM 8 9 10 11 PR- 16 18 VOL+ VOL- OK/ FREEZE 12 13 14 15 PR+ 20 21 22 30 31 32 MENU 33 i ? 17 19 29 34 TEXT/ MIX 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 35 36 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36.
Performing the initial power-on settings TV controls: Temporary On-Off (STAND-BY) Temporary sound mute (MUTE) When you press the red ( ) stand-by button (Temporary power on-off function) located on the upper right hand side of your remote control of your television PR+ when it is switched on; the sound and the picture will go off. In the stand-by PRfunction, the power indicator of your television will glow more.
Main Menu Press the ( ) button. The Menu including all the setting menus will be visualized on the screen. Navigating through the Menu titles with the up / down movement direction buttons ( )/( ) and pressing the up / down direction button ( )/( ), you may select the menu you would like. In the event that you wish to exit the application at any given stage, simply press the ( ) button.
Manual tuning and storing of the television channels: If you already know the Channel number: Press the ( ) button. Move onto the c h a n n e l settings menu by pressing the down movement button. Go onto the menu with the ( ) button. Select the system in which you would like to make the search from among the system tabs.
If you do not know the channel number Press the MENU button. Move onto the channel settings menu by pressing the down movement button. Select the program in which you would like to perform an Installation using the rightleft movement ( )/( ) or numerical buttons. Select the system in which you would like to make the search from among the system tabs. Enter the System tab by pressing the direction button ( ) below.
Program Table Press the ( ) button. Move onto the Program Menu by pressing the downward movement button. When you press the button ( ), the program table will appear on the screen. Changing the order of a program that has been stored in memory: In the event that you do not wish to come across certain programs while navigating through the channels using the ( )/( ) buttons, then you can use that function.
The settings on your new television: Setting up the Sound Menu You may perform the sound setting using the “ VOL+” or “VOL-“ buttons on your television or the ( ), ( ) buttons on your remote control. You can perform the other sound settings by entering the Sound menu. For this purpose, press the MENU ( ) button on your remote control. Select the sound menu tab ( ) using the direction button. You can select in this menu whichever you would like for performing a process from among the titles.
Wide Screen Display Picture Set up: The TV can be visualized in different formats according to the broadcast made. Pressing ( ) button, selecet the features Letterbox, Subtitle, Automatic,16:9 ,14:9 and 4:3. Attention Please: When the MENU button is pressed, the menu will change as it is visualized on the screen. This condition ensures that the menus do not extend beyond the borders of the visualized parts of the screen.
Timer: Your television deploys the feature of being able to be turned off at the end of a period of time that you detected and to be turned on again after a time you designated. To ensure that your television turn off at the end of your desired time period, select the timer tab. Select your desired period of time with the numerical buttons. Determine the time for turning on in the same way. Enter in the program no. tab the channel from which you would like the TV to be turned on.
FREEZE: You may freeze the program picture you are watching thanks to this feature. For this purpose, press the ( ) button on your remote control while there are no menus on the screen. The program picture will freeze until the same button is pressed for the second time. OK/ FREEZE Note: The Freeze feature also freezes PIP screen while there is a PIP picture on the screen. Using the PIP (Picture in Picture) feature; Press the ( ) button on your remote control. The PIP screen appears on the screen.
Teletext viewing button (MIX) in the TV picture Teletext Being one of the most prominent services of broadcasting today, Teletext renders using the TV more fruitful. Teletexts means in short the transmission of various updated information along with the TV broadcast in the form of texts and graphics. To be able to receive a quality teletext broadcast, a good antenna system and a broadcast that is not weak, with no reflections and interference from other channels are required.
Stop Button (HOLD) Question - answer button (REVEAL) Some information is laid out by the broadcasting agency in multiple pages and it is broadcast in the automatic cycle mode. For example, on a text of four pages, the pages are indicated with the figures 01, 02,03 and 04 on the bottom of the page. To view one of these pages longer, press the ( ) button. When you press the same button again, the cycle continues.
External equipment connection You can connect to your television many compatible sound and picture devices. AV inputs: Press the AV button on the UK repeatedly. You may see the options through which you can enter. AV1: Select this option for watching the picture of the broadcast device connected to the Scart 1. (You can watch via this Scart if there is a RGB output from the device with which you made a connection).
Via the antenna input Via the RCA or S-Video socket 1. Connect the RF out socket of the video device to the antenna input located behind the television. 2. Connect the connection cable to the RF socket of the video device. 3. Store the video channel in the memory under any program. 4. Press stored video program number. 5. Press the PLAY key of the video. 6. You may connect the antenna cable to the antenna input of your video.
Connecting a DVD Player Via the SCART socket Via the RCA socket Before making the connections, make sure first that your television and the DVD player device are turned off. Before making the connections, make sure first that your television and the DVD player device are turned off. Connect one end of the Scart socket cable (not supplied with the television) to the suitable connection terminal of the DVD player device and the other end to the Scart connection point behind your television.
Connecting a Decoder Via the SCART socket Via the RCA socket Before making the connections, make sure first that your television and the decoder device are turned off. Connect one end of the Scart socket cable (not supplied with the television) to the suitable connection terminal of the decoder device and the other end to the Scart connection point behind your television. Note: It is necessary that the decoder device be equipped with a tuner so that you can connect a decoder through a RCA connection.
INPUT Your LCD television can also be used as a PC monitor since it also enables VGA inputs at the same time. Connecting PC: Connect the D-Sub connector to the PC-IN input Automatic position: It ensures that the most behind your television using a suitable cable (not appropriate geometrical settings be made supplied with your TV). Using again a suitable according to the input mode.
Connecting a Video recorder device and a digital satellite receiver Behind the television Video recorder Digital satellite receiver Antenn TV Video a output Antenn Scart socket Scart socket a input Antenn a output Scart soket Antenn a input Antenna socket ANT IN L AUDIO R Y Pb COMPONENT VIDEO INPUT Pr HDMI PC-IN PC AUDIO-IN Connecting a video camera Sound Input (R) S-VHS V L SPDIF Video Input AUDIO-OUT Sound Input (L) L AV3 R Sound Input (R) Sound Input (L) S-Video output Video Camera
Help and tips The television does not function No sound Make sure that the power cable of the television is connected to the network and the power on -off switch is turned on. • Low picture quality • Is the antenna cable connected? • If you are using a satellite antenna, has the antenna been adjusted to receive broadcast in the best way? • Be careful that the antenna is far from devices that emit electromagnetic waves. (Neon lights, loudspeakers etc.
Technical specifications chart Picture tube size/type 26” 16:9 active matrix TFT Sound outlet power (10% THD) 2x7 W Power consumption 120 W Stand-by Power consumption 1,5 W General technical specifications Power supply AC: ............................................................................230V~50 Hz Program memory: ...................................................100 RF Antenna input: ...................................................75 Ohm (Co-axial) Loudspeaker impedance: .............
AUA.
