Operation Manual

32
Inserting the battery in the remote control
1 Pull off the film from the battery.
2 Pull out the battery holder.
3 When inserting the battery (3 V, lithium) ensure that the positive terminal (+) faces
upwards and the buttons of the remote control are facing downwards.
4 Push the battery holder back into the remote control until it latches into place.
Note:
If the device no longer reacts properly to remote control commands, the battery may be
flat. Ensure that used batteries are removed. The manufacturer accepts no liability for
damage resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, should not be disposed of with
household waste. Please dispose of used batteries in an environmentally responsible
manner. Find out about the legal regulations which apply in your area.
CONNECTION AND PREPARATION ___________