Operation Manual

ENGLISH
33
Power supply
Mains operation
Note:
Check that the mains voltage on the type plate (on the bottom of the device) corresponds
to your local mains supply.
If this is not the case, contact your specialist dealer.
1 Plug the power cord supplied into the »AC
~
« socket on the back of the device.
2 Plug the power cord into the wall socket.
Caution:
The only way to disconnect the device from the mains is to pull out the plug.
Battery operation
1 Press the catch and remove the lid to open the battery compartment on the bottom of the
device.
2 Insert six batteries (6 x 1.5 V, type IEC LR14/AM2/C size), observing the polarity
marked in the battery compartment.
Notes:
Remove the batteries when they are flat or when you are not using the device.
The manufacturer accepts no liability for damage caused by leaking batteries.
The batteries are switched off during mains operation.
Environmental note:
Batteries, including those which contain no heavy metals, may not be disposed of with
household waste. Please dispose of used batteries in an environmentally sound manner.
Find out about the legal regulations which apply in your area.
Connecting an MP3 player or a USB memory stick
The device supports most USB memory sticks and MP3 players.
1 Switch off the appliance.
2 Plug the USB memory stick or the USB cable of the MP3 player into the USB interface
»
USB
« in the CD compartment
or
plug the USB memory stick or the USB cable of the MP3 player into the USB interface
»
USB
« on the back of the device.
Notes:
The USB cable should not be longer than 2 m.
Switch off the device before removing USB memory stick or MP3 player.
((
CONNECTION AND PREPARATION
___________