Operation Manual

ENGLISH
39
Pausing and resuming playback
When the resume function is activated (display: » «) you can continue playback at the
beginning of the same track after switching off and on again in CD/MP3/WMA mode.
However, changing the input source deactivates the resume function.
1 Activate the resume function with »RESUME ST/MO«.
2 To deactivate the resume function, press »RESUME ST/MO« again.
Selecting tracks
1 During playback, press »8« or »9« until the number of the track you want to hear
appears in the display.
– Playback of the selected track starts automatically.
Note:
You can also select tracks in the stop position. However, you must then start playback of
the track with »
ı
II«.
Searching for a passage within a track
1 During playback, press »8« or »9« and hold it down until you find the passage you
want to hear.
– Playback starts when you release »8« or »9«.
Selecting albums and tracks (only MP3/WMA)
1 In stop mode, press »A« or »
S
«.
– The list of albums appears in the display.
2 Select the album by pressing »A« or »
S
«.
3 Select the track by pressing »
8 or 9«.
4 Press »
ı
II« to start playing back the track.
Playback functions
1 During playback press »MODE« until the function appears in the display.
– Display: » «.
– The current track is repeated.
– Display: » ALL«.
– All of the tracks are repeated.
– Display: » FOLDER« (only MP3/WMA).
– All the tracks on the current album are played back repeatedly.
– Display: »INTRO«.
– The first ten seconds of the following track are played.
– Display: »RANDOM«.
– All tracks on the CD are played back once in random order.
2 To quit the function, press »MODE« until all the repeat functions disappear from the
display.
w
w
w
RS
CD/MP3/WMA MODE
__________________________________