Berlin 55 CLX 8595 HD FR
TABLE DES MATIÈRES- -------------------------------------------------------------------------------4 INSTALLATION ET SÉCURITÉ 6 6 7 7 INFORMATIONS GÉNÉRALES Fonctions spéciales de votre téléviseur Réception de stations numériques Remarques importantes concernant la protection de l’environnement Remarques relatives aux images fixes 8 9 9 10 CONNEXION/PRÉPARATION Connexion de l'antenne et du câble d'alimentation Insertion des piles dans la télécommande 11 11 12 13 14 PRÉSENTATION Connexions du télévise
TABLE DES MATIÈRES- -------------------------------------------------------------------------------72 72 72 72 PORTAIL INTERACTIF (HbbTV) Le HbbTV, qu'est-ce que c'est ? Utilisation du service HbbTV Fonctions supplémentaires des séquences vidéo 73 73 73 74 75 76 76 77 77 78 78 78 79 80 81 FONCTIONS PRATIQUES Réglages TV Réglages de la langue et du clavier Paramètres d’accessibilité Accessoires Paramètres avancés Mode Économie d'énergie Fonctions dans le menu « À propos » Mise à jour logicielle (OAD) Mise
INSTALLATION ET SÉCURITÉ------------------------------------------------------------Veuillez prendre en compte les informations suivantes lors de l'installation de votre téléviseur. 7 Ce téléviseur a été conçu pour recevoir et retransmettre des signaux vidéo et audio. Toute autre utilisation est strictement interdite. 7 La meilleure distance pour regarder est de 5 fois la taille de la diagonale de l'écran. L'éclairage externe direct sur l'écran réduit la qualité de l'image.
INSTALLATION ET SÉCURITÉ------------------------------------------------------------7 ce produit. Veuillez utiliser votre téléviseur dans un endroit éloigné autant que possible des téléphones cellulaires, des fours à microonde et des dispositifs semblables fonctionnant avec des ondes de fréquence élevées. Sinon, ces ondes radio pourraient causer un dysfonctionnement de votre téléviseur. 7 Évitez d'exposer les piles à une chaleur excessive due à la lumière directe du soleil, au feu, etc.
INFORMATIONS GÉNÉRALES--------------------------------------------------------Fonctions spéciales de votre téléviseur Votre téléviseur vous permet de recevoir et de visualiser des stations numériques (par DVBS, DVB-T et DVB-C), y compris des stations en Haute Définition (HD). Pour l'instant la réception de ces stations de télévision numériques en Haute Définition ne sont disponibles que dans certains pays d'Europe.
INFORMATIONS GÉNÉRALES--------------------------------------------------------à tout moment en utilisant les applications DMC sur votre appareil mobile ou votre PC sans lancer l’application DLNA. En utilisant la fonction de DMR de votre téléviseur, vous pouvez démarrer la lecture de contenus sur un autre appareil mobile ou PC et vous pouvez effectuer des contrôles de ces appareils au lieu de la télévision. Pour cela, vos appareils doivent être équipés de périphériques DMC (Digital Media Controller).
INFORMATIONS GÉNÉRALES--------------------------------------------------------Remarques relatives aux images fixes En regardant la même image pendant longtemps à l'écran, une image fixe s'immobilise faiblement en arrière-plan. Les images faibles en arrière-plan sont dues à la technologie LCD/LED et ne nécessitent aucune action sous garantie. Pour éviter de se retrouver dans de tels cas et/ou en minimiser l'impact, nous vous recommandons d'observer les consignes ci-après.
CONNEXION/PRÉPARATION-------------------------------------------------------Connexiondel'antenneetducâbled'alimentation 3 2 1 1 Pour recevoir des chaînes numériques satellites (DVB-S), branchez le câble de l'antenne satellite à la prise de l'antenne »SATELLITE« sur le téléviseur ; et / ou 2a Pour recevoir des émissions numériques terrestres (DVB-T), connectez le câble à l'antenne du toit ou intérieure (antenne intérieure passive ou active avec sa propre alimentation) à la prise de l'antenne »ANT I
CONNEXION/PRÉPARATION-------------------------------------------------------Insertion des piles dans la télécommande Remarque concernant l'environnement 7 Le symbole présent sur la pile ou sur l'emballage indique que la pile fournie avec ce produit ne doit pas être traitée comme une ordure ménagère. Sur certaines piles, ce symbole peut être associé à un symbole chimique.
PRÉSENTATION------------------------------------------------------------------------------------------------Connexionsdutéléviseur Audio Entrée de signal audio pour PC. PC-IN Prise VGA, entrée de signal vidéo pour PC. COMPONENT LR Entrée de signal audio (signal YUV). PrPbY Entrée de signal vidéo (signal YUV). AV1/S-VHS Prise Euro/AV (signal CVBS, signal RGB) ; entrée de signal vidéo pour les caméras S-Video (avec convertisseur Scart-S-VHS).
PRÉSENTATION------------------------------------------------------------------------------------------------SATELLITE Prise d’antenne satellite. ANT IN Prise d’antenne. HDMI4 (ARC) P rise HDMI, entrée de signal audio/vidéo (HDMI). HDMI3 P rise HDMI, entrée de signal audio/vidéo (HDMI). U ranchement casque (prise B de 3,5 mm) ; Sortie audio externe (avec casque-convertisseur RCA). HDMI2 P rise HDMI, entrée de signal audio/vidéo (HDMI).
PRÉSENTATION------------------------------------------------------------------------------------------------Télécommande - principales fonctions Met l'appareil en marche à partir de la veille ; sélectionne directement des chaînes. Sélectionne la liste des chaînes (»Toutes«, »FAV 1« à »FAV 4«). Ouvre le Guide TV électronique Affiche des informations. Ouvre le menu. Ouvre la liste des chaînes. Allume et éteint la télévision (veille). ascule entre les modes TéléB texte et TV.
PRÉSENTATION------------------------------------------------------------------------------------------------Télécommande – toutes les fonctions R Bouton d’éclairage. S'éteint automa- tiquement après un certain temps. (rouge) Sélectionne une page en mode télétexte ; (vert) Sélectionne / active diverses fonctions (jaune) dans les menus. (bleu) 5 Double la taille des caractères en mode télétexte ; sélectionne la piste / image précédente dans l’explorateur de fichiers.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Configuration initiale La télévision est équipée d'un « assistant d'installation », qui vous guide étape par étape à travers les paramètres de base. À l’aide de l'écran de dialogue, le manuel d’utilisation assure une présentation simple et claire des paramètres supposés complexes et des entrées de données.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Configuration initiale – Présentation Sélectionner la langue (page 17, étape 3) Sélectionner le pays (page 17, étape 5) Sélectionner le mode (page 17, étape 6) Configuration réseau (page 17, étape 8) Par câble Wifi Sans fil WPS (page 17, étape 8) (page 18, étape 13) (chapitre page 42) Auto Auto Bouton PIN (Chapitre page 42) (Chapitre page 42) (page 17, étape 8) Manuellement
RÉGLAGES---------------------------------------------------------------------------------------------------------------Organisation de la configuration initiale 6 Confirmez l’option »Mode Accueil« avec la touche »OK« ; ou 1 Basculez le téléviseur en mode veille avec le bouton d'allumage »ON • OFF«. sélectionnez l’option »Amélioré« à l’aide de la touche »<« ou »>« et appuyez sur »OK« pour confirmer.
RÉGLAGES---------------------------------------------------------------------------------------------------------------10 Appuyez sur »« (rouge) pour sélectionner »Connecter« pour établir une connexion au modem. – Le message »Connexion... Veuillez patienter« s'affiche, et en cas de connexion, le message »Connexion à la Passerelle : Réussie« s’affiche. 11 Appuyez sur »« (vert) pour vérifier les réglages effectués et également si la connexion au réseau local et Internet a été établie.
RÉGLAGES---------------------------------------------------------------------------------------------------------------23 Confirmez le bouton-poussoir »Page suivante« à l’aide de la touche »OK«. Remarques : Sélectionnez Type de chaîne. Appuyez sur »<« ou »>« si vous voulez rechercher uniquement les chaînes numériques (Numérique) ou uniquement les chaînes radio (Radio) ou les deux (Numérique + Radio) et appuyez sur »OK« pour sélectionner et marquer ou démarquer les éléments »Numérique« et/ou »Radio«.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Recherche des chaînes de télévision numériques terrestres (DVB-T) 31 Sélectionnez l’option »Air« à l’aide de la touche »<« ou »>« et appuyez sur »OK« pour confirmer. Important : L'alimentation de l'antenne (5 V) ne peut être allumée que si l'antenne est une antenne active d'intérieur équipée d'un amplificateur de signal.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Modification de l’Éditeur de chaîne des chaînes numériques Ouverture du Tableau des programmes Les chaînes trouvées à la fin de la recherche sont mémorisées dans l’»Éditeur de chaîne«. 1 Ouvrez le menu à l’aide de la touche »MENU«.
RÉGLAGES---------------------------------------------------------------------------------------------------------------« signe à côté du nom de la chaîne dans le tableau des programmes.
RÉGLAGES---------------------------------------------------------------------------------------------------------------4 Sélectionnez le nouvel emplacement de la chaîne avec les touches »V«, »Λ«, »<« ou »>« et appuyez sur »OK« pour confirmer. 5 Pour quitter le menu »Éditeur de chaîne«, appuyez sur »EXIT«. Affichage des chaînes dans l’Éditeur de chaîne par le type d’antenne Si vous possédez plus d’un type d’antenne, vous pouvez afficher les chaînes dans l’Éditeur de chaîne par le type d’antenne.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Appuyez sur »« (jaune) et sélectionnez la ligne »Supprimer des Fav.« à l’aide des touches »V«, »Λ« et confirmez en appuyant sur »OK«. La chaîne que vous avez sélectionnée est maintenant supprimée de la liste des favoris. Lorsqu'une chaîne mémorisée dans la liste des chaînes favorites est supprimée, l’ordre des chaînes dans la liste des favoris est mis à jour.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Renommer les chaînes AV Vous pouvez renommer les chaînes AV en fonction du périphérique que vous avez connecté. Par exemple, pour un PC que vous avez connecté à une source HDMI1 du téléviseur avec un câble HDMI, vous pouvez nommer la source comme le PC. 1 Ouvrez le menu »Type signal entrée« à l’aide de la touche » «.
RÉGLAGES--------------------------------------------------------------------------------------------------------------Réglagesdel'image Réglagesdel’imageaméliorés 1 Ouvrez le menu à l’aide de la touche »MENU«. Les « réglages de l'image améliorés » se retrouvent dans les principales améliorations d'images numériques qui, cependant, doivent être utilisées au besoin lorsque la qualité de l'image et la transmission sont excellentes.
RÉGLAGES---------------------------------------------------------------------------------------------------------------»Dynamic Contrast« – La fonction dynamique et optimale règle le contraste pour le contenu de l’image respective par l’analyse des images et sa modification en fonction d’un changement de contraste. Ceci augmente le contraste, cependant, peut aussi réduire les niveaux de luminosité visibles dans l’image.
RÉGLAGES--------------------------------------------------------------------------------------------------------------Réglagesduson DTSStudioSound™ 1 Ouvrez le menu à l’aide de la touche »MENU«. DTS Studio Sound est une suite de solution sonore avancée qui extrait et place avec précision les signaux audio pour une expérience de son immersive à travers les haut-parleurs intégrés des téléviseurs.
RÉGLAGES---------------------------------------------------------------------------------------------------------------Chaîne stéréo/dual Volume automatique Si l’appareil reçoit des programmes avec deux canaux, par exemple un film avec la bande son originale sur le canal audio B (affichage : »Dual II«) et la version doublage sur la bande son A (affichage: »Dual I«), vous pouvez sélectionner le canal audio souhaité. Les chaînes de télévision émettent avec différents niveaux de volume.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------Options de base Mise en marche/arrêt 1 Basculez le téléviseur en mode veille avec le bouton d'allumage »ON • OFF«. 2 Appuyez sur »8«, »1…0« ou »P+« ou »P-« pour basculer le téléviseur en mode veille. 3 Appuyez sur »8« pour basculer le téléviseur en mode veille. 4 Basculez le téléviseur en mode veille avec le bouton d'allumage »ON • OFF«.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------Réglages de l'image Sous-titres 1 Ouvrez le menu Outils à l’aide de la touche »TOOLS«. Vous pouvez sélectionner différents sous-titres lorsque vous regardez des canaux numériques. Cela dépend du programme retransmis. 2 Sélectionnez la ligne »Mode Image« avec les touches »V« ou »Λ«. 3 Sélectionnez le réglage de l’image en appuyant sur »<« ou »>«.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------Arrêt de la programmation Dans le menu »Arrêt programmation«, vous pouvez entrer l'heure d'arrêt de la télévision. Lorsque cette heure arrive à échéance, la télévision passe en mode de veille. 1 Ouvrez le menu Outils à l’aide de la touche »TOOLS«. 2 Sélectionnez la ligne »Arrêt programmation« avec les touches »V « ou »Λ«. 3 Sélectionnez le temps d'arrêt à l’aide de la touche »<« ou »>«.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------De nombreuses entreprises de radiodiffusion offrent le programme quotidien mais ne les accompagnent pas de descriptions détaillées. 7 D'autres encore n'offrent pas d'informations du tout. 7 3 Sélectionnez la chaîne de télévision avec les touches »V« ou »Λ«. – Les informations sur le programme actuel s’affichent dans la chaîne de télévision sélectionnée. 4 Passez aux informations sur le programme en cours avec la touche »OK«.
FONCTIONNEMENT DU TÉLÉVISEUR------------------------------------6 En appuyant une fois sur »>« vous pouvez accéder aux résultats et sélectionner les résultats à l’aide de la touche »V« ou »Λ« et afficher les sous-catégories avec la touche »OK«. Remarque : Pour rechercher les sujets spécifiques, appuyez sur »<« pour sélectionner l’option »À la carte« et appuyez sur »OK« pour confirmer. Sélectionnez le sujet souhaité dans la liste avec la touche »V« ou »Λ« et confirmez avec la touche »OK«.
FONCTION 3D---------------------------------------------------------------------------------------------------Informations importantes concernant la fonction 3D Veuillez prêter attention aux informations ci-après pendant l’utilisation de la fonction 3D. 7 Regarder la télévision à une distance rapprochée pendant une longue durée altère la vision. 7 Évitez de regarder les images 3D pendant de longues périodes.
FONCTION3D---------------------------------------------------------------------------------------------------Regarderdesprogrammesen3D Remarques: La fonction 3D est uniquement prise en charge sur les entrées »HDMI«, »YPbPr«, »VGA«, »USB«, »DLNA«, »DVB-T«, »DVB-C« et »DVB-S«. 7 7 7 Avec les entrées »HDMI«, »YPbPr« et »VGA«, le mode 3D n’est pas actif sauf pour les résolutions à »1280 x 720p 50/60 Hz«, »1920 x 1080i 50/60 Hz« et »1920 x 1080p 24/30, 50/60 Hz«.
FONCTION 3D---------------------------------------------------------------------------------------------------Réglage des effets 2D → 3D Lorsque vous faites passer la diffusion du mode 2D au mode 3D, vous avez la possibilité d'ajuster l'effet le plus adapté en fonction de vos préférences personnelles. 1 Sélectionnez la ligne »Mode Effet« à l’aide des touches »V« ou »Λ« et réglez-la sur »On« à l’aide des touches »<« ou »>«. – Les options »Perspective 3D« et »Profondeur« sont activées.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Pour utiliser les fonctions « GRUNDIG AppLICATION store » et « Fonctionnement avec serveur DMS », vous devez connecter votre téléviseur à votre réseau domestique utilisant une connexion Internet, puis vous connecter. Réseaucâblé Connexionauréseaucâblé 1 Connectez la sortie du modem externe à la prise »LAN« avec le câble Cat 5.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Réglagesduréseauavecfil Il y a deux manières d'effectuer les réglages du réseau câblé : A Connexion automatique, Toutes les données concernant les réglages de la connexion (»IP Adresse«, »Netmask«, »Gateway« et »DNS«) sont obtenues automatiquement du modem. A Connexion manuelle, toutes les données de réglages de connexion (»IP Adresse«, »Netmask«, »Gateway« et »DNS«) doivent être configurées manuellement.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Connexionmanuelle Entrez l’adresse IP avec la touche »1…0«. Certains réseaux requièrent une adresse statique IP. Si votre réseau requiert une adresse IP statique, vous devez entrer les valeurs »IP Adresse«, »Netmask«, »Gateway« et »DNS« manuellement. Vous pouvez obtenir vos valeurs »Adresse IP«, »Netmask«, »Gateway« et »DNS« auprès de votre Fournisseur de service internet (ISP).
CONFIGURATIONRÉSEAU---------------------------------------------------------------Réseausansfil 7 Connexionauréseauwifi Il existe différentes manières d'effectuer les réglages du réseau wifi. »Sans fil« et »Sans fil WPS« (Configuration protégée WiFi). 7 Placer le modem ou le routeur wifi en élévation augmentera la force de réception de la connexion wifi. La force du signal de la connexion sans fil peut varier selon le type de modem et la distance entre le modem et la télévision.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Exigencestechniques La plupart des réseaux domestiques sont dynamiques. Si vous avez un réseau dynamique, vous devez utiliser un modem DSL compatible DHCP. Les modems et IP sharers compatibles DHCP obtiennent automatiquement les valeurs »IP Adresse«, »Netmask«, »Gateway« et »DNS« requises pour l'accès Internet et vous n'êtes donc pas obligés d'entrer manuellement ces valeurs.
CONFIGURATIONRÉSEAU---------------------------------------------------------------8 Sélectionnez la ligne »Sélect. point d'accès« avec les touches »V« ou »Λ« et appuyez sur »OK« pour confirmer. – Les réseaux sans fil présents compatibles WPS sont recherchés pour s’afficher dans le menu »Sélect. point d'accès«. 9 Sélectionnez le réseau auquel vous voulez vous connecter à l’aide des touches »V«, »Λ«, »<« ou »>« et appuyez sur »OK« pour confirmer.
CONFIGURATIONRÉSEAU---------------------------------------------------------------Remarque: Pour que le téléviseur découvre le modem sans fil sur le réseau, le nom du réseau doit être compatible avec les caractères ASCII. 7 10 Sélectionnez le caractère requis à l’aide des touches »V«, »Λ«, »<« ou »>« et passez au caractère suivant en appuyant sur »OK«. – À laide des touches»Shift« ➡ »OK«, vous pouvez basculer entre les lettres majuscules/chiffres et les lettres minuscules/ caractères spéciaux.
CONFIGURATION RÉSEAU----------------------------------------------------------------10 Sélectionnez la ligne »DNS« avec la touche »V«. Entrez l’adresse DNS avec la touche »1…0«. 11 Sélectionnez la ligne »Netmask« avec la touche »V«. Entrez l’adresse Netmask avec la touche »1…0«. 12 Sélectionnez la ligne »Gateway« avec la touche »V«. Entrez l’adresse Gateway avec la touche »1…0«. 13 Sélectionnez la ligne »Sélect. point d'accès« avec les touches »Λ« ou »V« et appuyez sur »OK« pour confirmer.
CONFIGURATION RÉSEAU----------------------------------------------------------------Connectez le téléviseur à un réseau « caché » Même si le SSID (Service Set Identifier) du routeur est invisible, vous pouvez connecter votre téléviseur à ce réseau. 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Configuration réseau« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer.
FONCTION SMART INTER@CTIVE TV 3.0------------------------Applications Internet SMART Inter@ctive TV 3.0 Grundig se réserve le droit d'apporter toutes les modifications, restrictions, extensions, transferts et suppression des applications Internet fournies à travers votre SMART Inter@ ctive TV 3.0. 7 Les applications interactives Smart Inter@ctive TV 3.0 fournissent à votre téléviseur les services et les pages Internet. Ces applications sont conçues en fonction de votre téléviseur.
FONCTION SMART INTER@CTIVE TV 3.0------------------------Navigation et saisie de texte pendant l’enregistrement 1 Appuyez sur »@« pour ouvrir le menu »MyApps«. – L'écran d’enregistrement de Grundig Smart Apps s'affiche. Vous devez vous inscrire pour utiliser des applications intelligentes entièrement fonctionnelles. CONNEXION Vous devez vous inscrire pour accéder à toutes les applications de Grundig Application Store. 1 Appuyez sur »@« pour ouvrir le menu »MyApps«.
FONCTION SMART INTER@CTIVE TV 3.0------------------------Pour passer au prochain écran, appuyez sur »« (bleu), pour afficher le clavier, appuyez sur »OK«. 6 Entrez l’emplacement : Pour entrer les données, utilisez les touches »V«, »Λ«, »<« et »>« pour sélectionner » BACK <« et appuyez sur »OK« pour confirmer. Pour passer au prochain écran, appuyez sur »« (bleu), et appuyez sur »OK« pour aficher le clavier.
FONCTIONSMARTINTER@CTIVETV3.0------------------------SélectiondesapplicationsInternet 1 Appuyez sur »@« pour ouvrir le menu »MyApps«. – Le menu My Apps s’affiche. App. Store My App Utilisateur 2 Pour entrer dans la fenêtre »Grundig Application Store«, sélectionnez le boutonpoussoir »Magasin en ligne« à l’aide des touches »V«, »Λ«, »<« ou »>« et appuyez sur »OK« pour confirmer. – Le menu »Grundig Application Store« s’affiche.
FONCTION SMART INTER@CTIVE TV 3.0------------------------Désinstallation des applications Internet Ajouter les applications Internet aux favoris 1 Appuyez sur la touche »« (rouge) dans le menu »My apps« et sélectionnez les catégories à l’aide de la touche »<« ou »>«. Vous pouvez ajouter des applications Internet fréquemment utilisées aux favoris et récupérer ces sous- rubriques »Favoris« sous les catégories.
FONCTIONSMARTINTER@CTIVETV3.0------------------------MenuprincipaldunavigateurSmartInter@ctiveTV3.0 1 Applications. 2 My apps 2 Bouton-poussoir de Application store. Magasin en ligne 3 1 3 Barre de recherche 4 Menu des catégories. 5 Menu Outils. 6 Quitter. Catégories 4 Navigationdanslemenuprincipal 1 Appuyez sur la touche »« (rouge) dans le menu »My apps« et sélectionnez les catégories à l’aide de la touche »<« ou »>«.
NAVIGATEURWEB--------------------------------------------------------------------------------------MenuNavigateurWeb 3 4 5 6 7 8 9 10 11 12 13 14 15 http://www.grundig.de grundig. 2 16 1 Zoom arrière Zoom avant Page Précédente Page Suivante Navigation Menu du processus Barre d’outils 1 Commandes du menu. NavigateurWeb 2 Onglet activé Le navigateur Web vous permet de naviguer sur Internet. 3 Page précédente. 4 Page suivante 5 Rafraîchir. 6 Nouvel onglet. 7 Barre d’adresse.
MODESERVEURMULTIMÉDIA-----------------------------------------------------Lecturedesdossiersvidéo,musiqueetimageavecuneconnexionauréseaulocal. Grâce au menu DLNA de votre téléviseur, vous pouvez facilement avoir accès aux fichiers vidéo, musicaux, photo sur le serveur ; et grâce à l'option DMR, vous pouvez automatiquement démarrer et interrompre la lecture des supports sur les périphériques dotés de la fonction DMC.
MODE SERVEUR MULTIMÉDIA------------------------------------------------------Les fichiers audio lus à travers l'appareil DMS prennent en charge les formats suivants ayant obtenu un certificat DLNA : »AAC_ADTS_320«, »LPCM«, »MP3«, »WMABASE« et »WMAFULL«. 7 Les fichiers image lus à travers l'appareil DMS prennent en charge les formats suivants ayant obtenu un certificat DLNA : »JPEG_LRG«, »JPEG_MED« et »JPEG_SM«.
ENREGISTREMENTUSB--------------------------------------------------------------------------Informationsrelativesà l'enregistrementetàlalecture desprogrammesdetélévision 7 7 7 7 7 L'enregistrement et la reproduction des programmes n'est possible qu'avec les chaînes de télévision numériques (DVB-S, DVB-T et DVB-C). En fonction de la station émettrice, vous pouvez être confronté à diverses restrictions sur certaines fonctions propres à certaines chaînes de télévision.
ENREGISTREMENTUSB--------------------------------------------------------------------------Connexiond'unsupportdedonnéesexterne Remarques: Il est conseillé de mettre le téléviseur en mode veille avant de connecter le support de données externe. 7 7 7 Avant de déconnecter le support de données, placez d'abord la télévision en veille pour ne pas endommager les fichiers. Il existe trois entrées USB sur le téléviseur, à savoir »USB«, »USB« et »USB3.0«. L’entrée »USB 3.
ENREGISTREMENT USB--------------------------------------------------------------------------Déconnexion d'un support de données externe 1 Dans le menu »Gestion disque«, sélectionnez la ligne »Retirer le disque« avec les touches »V« ou »Λ« et appuyez sur »OK« pour confirmer. Remarque : Vous pouvez maintenant retirer le disque en toute sécurité de la prise.
ENREGISTREMENT USB--------------------------------------------------------------------------Passer à l'enregistrement continu Lorsque l’option d’enregistrement continu est activée, le téléviseur lance l’enregistrement du programme en cours dans la mémoire décalage. La durée moyenne de l’enregistrement dans cette mémoire est de 60 minutes. 1 Ouvrez le menu à l’aide de la touche »MENU«.
ENREGISTREMENT USB--------------------------------------------------------------------------Enregistrement des programmes Vous pouvez enregistrer des programmes. Les programmes sont enregistrés sur le support de données externe et les archives sont gérées via le téléviseur. Pour effectuer un enregistrement d’1 minute, vous aurez besoin dune mémoire de 44 Mo jusqu’à 110 Mo. Vous pouvez visionner les autres enregistrements dans les archives pendant que le programme est en cours d’enregistrement.
ENREGISTREMENT USB--------------------------------------------------------------------------4 Pour ajouter des émissions à la minuterie, appuyez sur »OK«. – Les informations sur le programme TV à enregistrer s’affichent. 5 Sélectionnez la ligne »Enregistrer« à l’aide de la touche »>« et appuyez sur »OK« pour confirmer. – La plage d’enregistrement des données s’affiche. 6 Appuyez sur »OK« pour confirmer. 7 Appuyez sur »EXIT« pour fermer le menu.
ENREGISTREMENT USB--------------------------------------------------------------------------5 Dans le menu »Date«, utilisez les touches »1…0« pour entrer la date que vous voulez enregistrer (jj/mm/aaaa). Pour passer à l’élément suivant, appuyez sur »>«. 4 Avec la touche »V« ou »Λ«, sélectionnez les éléments que vous voulez éditer et modifiez-les à l’aide des touches »1…0« et »<« ou »>«. 6 Dans le menu »Heure de début«, utilisez les touches »1…0« pour entrer l’heure de démarrage (heure:minute).
ENREGISTREMENT USB--------------------------------------------------------------------------2 Sélectionnez l’élément du menu »PRnP« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. – Le menu »Lecteur multimédia« s’affiche. 3 Sélectionnez l’option »PVR« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. – Les fichiers enregistrés s’affichent.
CONNEXION AU PORT USB-----------------------------------------------------------Formats de fichiers Votre télévision peut être utilisée via l'entrée USB avec les formats de fichier suivants : Données vidéo La compression / décompression vidéo (codec) a pour but de réduire la zone de stockage sans altérer la qualité de l’image. Votre récepteur numérique HD vous permet de lire les données vidéo compressées à l’aide des standards DIVX, XVID, H.264/MPEG-4 AVC(L4.1, Réf.
CONNEXIONAUPORTUSB-----------------------------------------------------------Connexiond'unsupportdedonnéesexterne Il est conseillé de mettre le téléviseur en mode veille avant de connecter le support de données externes. Connectez l'appareil puis allumez de nouveau la télévision. Avant de déconnecter le support de données, placez d'abord la télévision en veille pour ne pas endommager les fichiers.
CONNEXIONAUPORTUSB-----------------------------------------------------------L'explorateurdefichier L’explorateur de fichier affiche les données vidéo, audio et image fournies par le support de données externes. Réglagesdanslemenu paramètresUSB Sélectiondumenu Si le support de données contient différents formats de fichier, vous pouvez désactiver les données (fichiers vidéo, audio, image) inutiles pendant la lecture à l’aide d’une fonction de filtre.
CONNEXION AU PORT USB-----------------------------------------------------------Sélection de la durée de l'affichage du diaporama 1 Sélectionnez la ligne »Intervalle diaporama« avec les touches »V« ou »Λ«. 2 Sélectionnez la durée (3, 5, 10 secondes) à l’aide de la touche »<« ou »>«. 3 Appuyez sur »EXIT« pour terminer les réglages.
CONNEXION AU PORT USB-----------------------------------------------------------Fonctions de base de la lecture 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Sélectionnez l’élément du menu »Lecteur multimédia« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. – Le menu »Lecteur multimédia« s’affiche. 3 Sélectionnez le support de données externe avec les touches »<« ou »>« et appuyez sur »OK« pour confirmer. – Le menu Lecteur média du support de données externe sélectionné s’affiche.
CONNEXION AU PORT USB-----------------------------------------------------------Fonctions supplémentaires de lecture En fonction des formats de fichier utilisés, les fonctions supplémentaires suivantes sont disponibles. Sélection de la partition dans les fichiers HD DivX Plus® (uniquement les fichiers vidéo pris en charge) 1 Pendant la lecture, sélectionnez le chapitre suivant avec la touche »>«. 2 Pendant la lecture, sélectionnez le chapitre précédent avec la touche »<«.
MODE TÉLÉTEXTE--------------------------------------------------------------------------------------------Remarque : Si vous désirez utiliser uniquement ce texte vidéo « normal », désactivez le texte vidéo numérique, consultez la page 106. 7 Mode TOP text ou FLOF text 1 Appuyez sur »TXT« pour passer au mode Télétexte. 2 Vous pouvez sélectionner directement les pages de télétexte à l’aide des touches »1...0« ou étape par étape à l’aide des touches »V« ou »Λ«. Pour revenir à la page 100, appuyez sur »?«.
MODE TÉLÉTEXTE--------------------------------------------------------------------------------------------Afficher directement une sous-page Si la page de télétexte sélectionnée contient d'autres pages, le numéro de la sous-page affichée ainsi que le nombre total de sous-pages sont affichés. 1 Affichez la sous-page à l’aide de la touche » «. 2 Appuyez sur »« (rouge) ou »« (vert) pour sélectionner une sous-page. 3 Appuyez sur » « pour quitter la fonction.
PORTAILINTERACTIF(HBBTV)-----------------------------------------------------LeHbbTV,qu'est-cequec'est? Ce service fournit par ARD comprend « Das Erste1Mediathek » accompagné d’un télétexte restructuré graphiquement avec des images haute définition. Le service ZDF inclut l'option « ZDF mediathek » et d'autres programmes d'informations (à partir de juillet 2012).
FONCTIONSPRATIQUES---------------------------------------------------------------------RéglagesTV Changerlalangueaudio 1 Ouvrez le menu à l’aide de la touche »MENU«. (uniquement pour les chaînes numériques) 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Réglages TV« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. – Le menu »Réglages TV« s’affiche.
FONCTIONS PRATIQUES---------------------------------------------------------------------Changer la langue du clavier Paramètres d’accessibilité Vous pouvez sélectionner la langue du clavier connecté à votre téléviseur. 1 Ouvrez le menu à l’aide de la touche »MENU«. 1 Sélectionnez la ligne »Langue et clavier« à l’aide des touches »V« ou »Λ« et appuyez sur »OK« pour confirmer. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«.
FONCTIONS PRATIQUES---------------------------------------------------------------------3 Sélectionnez la ligne »Volume de la description audio« avec les touches »V« ou »Λ« et utilisez les touches »<« ou »>« pour régler le volume. 4 Appuyez sur »BACK <« pour revenir au menu précédent ou appuyez sur »EXIT« pour terminer les réglages.
FONCTIONS PRATIQUES---------------------------------------------------------------------Paramètres avancés Mémoriser l’affichage du logo 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Réglages TV« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. 4 Sélectionnez la ligne »Paramètres avancés« avec les touches »V« ou »Λ« et appuyez sur »OK« pour confirmer.
FONCTIONS PRATIQUES---------------------------------------------------------------------3 Appuyez sur »BACK <« pour revenir au menu précédent ou appuyez sur »EXIT« pour terminer les réglages. Remarque : 7 Si l’écran se ferme pendant que vous ecoutez la musique en mode USB, appuyez sur »MENU« et sélectionnez »Off« à l’aide des touches »<« ou »>« pour fermer la fonctionnalité. Fonctions dans le menu « À propos » 1 Ouvrez le menu à l’aide de la touche »MENU«.
FONCTIONS PRATIQUES---------------------------------------------------------------------Avertissement : Le téléviseur redémarre après la mise à jour. N’éteignez pas votre téléviseur pendant les mises à jour. Remarque : 7 Pour une vérification automatique de la mise à jour logicielle, sélectionnez dans le menu »Configuration source« ➡ »Paramètres avancés«la ligne »OAD« à l’aide des touches »V« ou »Λ«. Utilisez »<« ou »>« pour sélectionner »On«.
FONCTIONSPRATIQUES---------------------------------------------------------------------Réglageminuterie MinuterieMarche 1 Ouvrez le menu à l’aide de la touche »MENU«. Dans le menu Minuterie marche, vous pouvez entrer l'heure d'allumage de la télévision. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Applications de la minuterie« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. – Le menu »App de minuterie« s’affiche.
FONCTIONS PRATIQUES---------------------------------------------------------------------Arrêt auto Dans le menu »Veille Auto.«, vous pouvez entrer l'heure d'arrêt de la télévision. Le téléviseur passe en mode veille après que l’heure saisie soit écoulée. 1 Sélectionnez la ligne »Arrêt auto« avec les touches »V« ou »Λ« et appuyez sur »OK« pour confirmer. 2 Sélectionnez la ligne »Mode« avec la touche »V« et ensuite Sélectionnez l’option »AUTO« à l’aide des touches »<« ou »>«.
FONCTIONSPRATIQUES---------------------------------------------------------------------Réglagesparentaux 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Accord parental« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer. – Le menu »Accord parental« s’affiche. Config.
FONCTIONS PRATIQUES---------------------------------------------------------------------2 Entrez le code PIN »1234« à l’aide des touches »1...0« dans l’invite de mot de passe. 3 Activez (On) ou désactivez (Off) le verrouillage du panneau à l’aide des touches »<« ou »>«. 4 Appuyez sur »BACK <« pour revenir au menu précédent ou appuyez sur »EXIT« pour terminer les réglages. Changer le code PIN À la place du code par défaut »1234«, vous pouvez entrer un code personnel. Veuillez noter votre code personnel.
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------DIGI LINK Votre téléviseur est doté de la fonction DIGI LINK. Cette fonction utilise le protocole CEC (Comité des télécommunications et de l’électronique). CEC vous permet d’établir une connexion HDMI entre votre TV et le lecteur DVD, STB ou l’enregistreur vidéo et contrôle ces équipements avec la télécommande du téléviseur. Cette fonction doit également doit être prise en charge par le périphérique que vous brancherez.
UTILISATIONDEPÉRIPHÉRIQUESEXTERNES------------Contrôledepériphérique 7 Vous pouvez déterminer la méthode par laquelle la télécommande de votre téléviseur va contrôler le périphérique externe. « et utilisez »<« ou »>« 1 Appuyez sur » pour sélectionner un signal entre »HDMI1« et »HDMI4«,et appuyez sur »OK« pour confirmer. 2 Ouvrez le menu à l’aide de la touche »MENU«. 3 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«.
UTILISATIONDEPÉRIPHÉRIQUESEXTERNES------------Hautedéfinition-HDprêt Votre télévision peut reproduire des signaux de télévision de haute définition (HDTV). Vous pouvez brancher les sources d'entrée ( d é c o d e u r H DT V ou lecteur DVD Haute Définition) à la prise »HDMI« (signal HDTV numérique). Ceci garantit la visualisation de programmes numériques HDTV même s’ils sont protégés contre copie (Protection contre la copie de contenu numérique en haute définition HDCP).
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------Connexion à un périphérique externe Avec un signal numérique audio/ vidéo Périphériques adaptés : Récepteur satellite numérique, Playstation, lecteur BluRay, lecteur/ enregistreur DVD, boîtier décodeur, ordinateur portable, PC. 7 Signal vidéo : image numérique ; définition : standard 576p ; HDTV 720p, 1080i, 1080p. 7 Signal audio : son numérique (stéréo, compression multicannal, non comprimé). 7 Position de canal »HDMI1«, »HDMI2«, »HDMI3«, »HDMI4«.
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------Avec signal S-Vidéo Périphériques adaptés : Lecteur/enregistreur DVD, enregistreur vidéo, enregistreur caméra, ordinateur portable, PC. 7 Signal vidéo : Y/C. 7 Signal audio : stéréo, analogique. 7 Position de la chaîne »S-VIDEO«. 7 1 Connectez la prise »AV1/S-VHS« du téléviseur à celle correspondante se trouvant sur le périphérique externe en utilisant un câble EURO/AV (signal vidéo et audio).
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------Appliquez la fonction HDMI ARC à l'appareil et activez HDMI ARC. 1 Mettez l'amplificateur numérique multicanal ou le récepteur AV sous tension. Si un lecteur Blu-ray est relié au récepteur AV, le lecteur doit être mis sous tension également. 2 Ouvrez le menu Outils à l’aide de la touche »TOOLS«. 3 Sélectionnez la ligne »Digilink« avec les touches »V « ou »Λ« et appuyez sur »OK« pour confirmer.
UTILISATION DE PÉRIPHÉRIQUES EXTERNES------------7 Sélectionnez l’option »Fixe« ou »Ajustable« à l’aide de la touche »<« ou »>«. Remarques : Si vous sélectionnez »Ajustable«, le volume peut être modifié dans l'option du menu »Volume sortie audio«. 7 Si vous voulez obtenir la sortie audio à partir du système hi-fi / récepteur AV, sélectionnez l’option »Off« dans la line »Haut-parleur TV avec»<« ou »>« 7 8 Appuyez sur »EXIT« pour terminer les réglages.
TAILLEDEL’ÉCRANPARCÂBLE(MHL)--------------------------------- Qu’est-cequeMHL? 7 7 7 Votre téléviseur prend en charge la connexion MHL (Connexion mobile Haute définition) grâce à un cable MHL ou un adaptateur MHL. La connexion MHL vous permet de partager l’écran de votre périphérique mobile avec la télévision en connectant votre périphérique mobile au téléviseur par un câble MHL.
TAILLEDEL’ÉCRANSANSFIL(LIVESHARE)------------------- Qu'est-cequeleLIVESHARE? 7 Liveshare est une technologie sans fil équipée d’un système d’exploitation Android et utilisé pour refléter l’écran de votre périphérique mobile qui prend en charge cette fonctionnalité sur votre téléviseur équipé de Liveshare. À laide de cette technologie vous pouvez partager le contenu de votre périphérique, présenter une diapositive ou jouer à votre jeu préféré sur un écran plus large.
MODEDUMONITEURPC-------------------------------------------------------------------- Branchementd'unPC 1 Connectez la prise »PC-IN« sur la télévision sur la prise correspondante sur le PC en utilisant un câble VGA. 2 Connectez la prise »Audio« sur la télévision sur la prise correspondante sur le PC en utilisant un câble adapté. Remarque: 7 Réglez votre PC pour l'écran (par exemple, résolution de l'image 1 280 x 768, fréquence de l'image 60 Hz).
FONCTIONNEMENTAVECL'INTERFACECOMMUNE Qu'estcequ’uneinterfacecommune? Contrôled'accèsaumoduleCAet auxcartesintelligentes L'interface commune (CI) est une interface pour les récepteurs DVB. 7 Les stations encodées ne peuvent être visualisées qu'avec le module CA adapté au système d'encodage et équipé de la carte intelligente correspondante. 7 Le téléviseur est équipé d'une fente d'Interface commune dans laquelle les modules CA de différents fournisseurs peuvent être insérés.
RÉGLAGESSPÉCIAUX------------------------------------------------------------------------------Rechercheautomatiquedes chaînesdetélévisionnumériquesàpartird'unsatellite Vous pouvez ajouter de nouvelles chaînes satellite ou modifier de façon fréquente les données satellite. Par conséquent, nous vous recommandons d’exécuter la fonction de recherche automatique de temps en temps. 8 Sélectionnez Type scan.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Recherche manuelle des chaînes de télévision numériques à partir d'un satellite Si vous ne parvenez pas à trouver certaines chaînes grâce à la recherche automatique, vous pouvez les chercher manuellement par la fonction de la recherche manuelle. Vous devez entrer correctement tous les paramètres de la chaîne.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Réglages LNB Remarques : La description suivante relative aux réglages LNB introduit une expertise substantielle concernant les systèmes satellite. Contactez votre revendeur à ce sujet. 7 Votre téléviseur prend en charge le système SCR (routeur pour canaux uniques). Si vous utilisez un système satellite SCR, suivez les étapes décrites dans la section » Type LNB«.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Avec le système satellite SCR, la recherche automatique simultanée par plusieurs utilisateurs / récepteurs peut engendrer des problèmes. – »22 KHz« : Selon le type de LNB, 22 kHZ audio est sélectionné. Pour un LNB universel, cette option est réglée sur »Auto« et ne peut être modifiée. – »Mode DISEqC« : En fonction du nombre de système satellite en cours, sélectionnez l’option »Off« »DiSEqC 1.0« ou »DiSEqC 1.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Réglages DiSEqC 1.2 Réglez la position de l’antenne satellite en fonction de chaque satellite. Ces réglages peuvent être mémorisés et vous pouvez déplacer l’antenne vers une position préréglée. 1 Sélectionnez la ligne »REGLAGE DiSEqC 1.2« avec les touches »V « ou »Λ« et appuyez sur »OK« pour confirmer. – Le menu »REGLAGE DiSEqC 1.2« s’affiche.
RÉGLAGESSPÉCIAUX------------------------------------------------------------------------------– Si le scan ne peut pas être réalisé avec l’option »Rapide«, sélectionnez »Complet«. Toutes les chaînes sont réglées et enregistrées avec le scan »Complet«. Ce processus de recherche peut prendre un long moment. Cette option est recommandée si votre opérateur par câble ne prend pas en charge la fonction de recherche rapide.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------ou Recherche automatique de chaînes TV numériques terrestres appuyez sur »EXIT« pour terminer les réglages. 1 Ouvrez le menu à l’aide de la touche »MENU«. 9 Passez à l’Éditeur de chaîne à l'aide de la touche »« (jaune) ; Recherche manuelle des chaînes de télévision depuis le fournisseur câble 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------ Si les chaînes précédemment enregistrées doivent être gardées dans la liste des chaînes et les nouvelles chaînes détectées doivent leur être ajoutées, appuyez sur »« (vert). 7 7 Si »« (rouge) est appuyé, les chaînes enregistrées seront supprimées de la liste des chaînes en cours. – Le menu »Recherche numérique« s'affiche, et la recherche des chaînes TV débute.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Mise à jour automatique du service Recherche des chaînes de télévision analogiques Si cette fonction est activée, les changements possibles d'opérateurs de réseau sont mis à jour automatiquement. Ce réglage n'est nécessaire que si vous ne recevez pas de chaînes numériques et n'avez pas réalisé de recherche analogique au cours de l'installation initiale. L'unité doit être placée sur le mode veille.
RÉGLAGESSPÉCIAUX------------------------------------------------------------------------------7 Remarques: Après avoir démarré la recherche, une demande de sécurité s’affiche. Appuyez sur »« (vert) pour confirmer l’option »Oui«. – Toutes les chaînes et listes de favoris pour les chaînes analogiques seront supprimées et rassemblées à nouveau. – Le menu »Recherche analogique« s'affiche, et la recherche des chaînes TV débute.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Modification des chaînes analogiques enregistrées Si des chaînes étaient enregistrées avec la recherche automatique de chaîne pendant le réglage des canaux de télévision, vous pouvez les supprimer. Vous pouvez également modifier ou saisir le nom d’une chaîne ou bien ignorer des chaînes. Sélection de la liste des chaînes 1 Ouvrez le menu à l’aide de la touche »MENU«.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Création d'une liste de favoris – chaînes analogiques Vous pouvez sélectionner vos chaînes préférées et les enregistrer dans quatre listes au maximum (FAV1 à FAV4). 1 Dans le menu »Éditeur de chaîne«, sélectionnez les chaînes que vous voulez ajouter dans la liste de favoris à l’aide des touches »V«, »Λ«, »<« ou »>«, et surlignez la chaîne de télévision en appuyant sur »OK«. –La chaîne est marquée d’une coche »✔«.
RÉGLAGES SPÉCIAUX------------------------------------------------------------------------------Activez et désactivez HbbTV Cette option permet de désactiver la fonction Hbb TV, ainsi les avertissements ne sont pas affichés sur les chaînes avec la fonction Hbb TV. 1 Ouvrez le menu à l’aide de la touche »MENU«. 2 Activez l’élément du menu »Réglages« à l’aide de la touche »OK«. 3 Sélectionnez l’élément du menu »Configuration source« à l’aide de la touche »>« ou »<« et appuyez sur »OK« pour confirmer.
INFORMATIONS---------------------------------------------------------------------------------------------Fiche du produit GRUNDIG Berlin 55 CLX 8595 HD Classe d’efficacité énergétique A Taille de l’écran : 139 cm/55“ Consommation d’énergie : en mode de fonctionnement 110 W / 155 W max.
INFORMATIONS---------------------------------------------------------------------------------------------Informations de service pour les fournisseurs Ce produit est conforme aux directives et aux réglémentations suivantes de l'Union européenne : 2006/95/EC sur les équipements électriques en utilisation avec certaines limites de tension. 2004/108/EC Directive concernant la compatibilité électromagnétique.
INFORMATIONS---------------------------------------------------------------------------------------------Les applications de dispositif à courte portée avec modulation à large bande avec DSSS et une autre que FHSS. La valeur de la densité moyenne maximale des applications de dispositif à courte portée avec modulation à large bande avec DSSS et une autre que FHSS est de 100 mW e.i.r.p.
INFORMATIONS---------------------------------------------------------------------------------------------Dépannage Si les solutions fournies ci-dessous ne vous permettent pas de résoudre le problème, veuillez consultez un revendeur agréé GRUNDIG. Veuillez garder à l'esprit que certains dysfonctionnements peuvent également être causés par les périphériques externes tels que les magnétoscope ou les récepteurs satellite.
INFORMATIONS---------------------------------------------------------------------------------------------Le périphérique DMS ne peut être trouvé Le périphérique DMS n'est pas allumé ou n'est pas en marche Assurez-vous que le périphérique DMS et allumé et en marche. Les connexions du réseau ne sont pas effectuées. Vérifiez les réglages du réseau. Mauvaise qualité de l'image (pixel) en mode WLAN.