Operation Manual

ENGLISH
14
Connecting the power adapter
Note:
7
Check that the mains voltage on power
adapter corresponds to your local mains
supply.
If this is not the case, contact your spe-
cialist dealer.
1 Connect the single plug of the power adapter
into the »DC IN« socket.
2 Connect the power adapter into the wall sock-
et.
Caution:
7
The device is connected to the mains with
the power cord. Pull out the power adapter
if you want to completely disconnect the de-
vice from the mains.
7
Make sure the power adapter is easily ac-
cessible during operation and not hindered
by other objects.
Charging the device
1 The power adapter to the device will automat-
ic recharge the internal rechargeable battery.
– The charging indicator flash “orange“ while
the device is charging and turn to “green“
when the device is fully charged.
Notes:
7
Charge the unit for about 4 hours.
7
When the device is “ON“ and no connect-
ed to power source, the charging indicator
flash “red“, it means battery needs charg-
ing.
Using and maintaining your
rechargeable battery
7
The battery must be charged at least 4 hours
prior to first use.
7
For long period of storage, please recharge
the battery at least once every two months to
maintain the battery in optimum condition.
7
Once the battery is fully discharged, immedi-
ately recharge regardless of whether you plan
to use the battery or not in order to maximize
battery life.
CONNECTION AND PREPARATION
____________________
7
Recharge efficiency will degrade when envi-
ronmental temperatures drop below 5°C or
exceed 35°C.
Warning:
7
Do not expose the battery to temperatures
in excess of 45°C.
Connecting external devices
Note:
7
Switch the device off before you connect
external devices.
1 Use a standard audio adapter to connect the
audio outputs of the external device to the
»AUX IN« (ø 3.5 mm) socket of the GSB 500.
Notes:
7
The GSB 500 will auto-switch into AUX IN
mode from Bluetooth mode after insert AUX
IN cable to the device.
7
If want to back to Bluetooth mode, please
remove AUX IN cable from the »AUX IN«
socket.
Charging a Bluetooth/USB
device
Your GSB 500 include a USB port at the back.
This allow you to charge a Bluetooth/USB
device using the GSB 500.
1 Connect your Bluetooth/USB using the USB
cable.
– The Bluetooth/USB device will begin to
charge.
2 Press and hold the »8« button for 2 seconds to
turn on the unit.
Notes:
7
The GSB 500 switches off automatically
after approx. 30 minutes.
7
Power output of the USB port is 500 mA.
If your device require more power may not
charge through this USB port.
7
Charging function may not be support for all
smartphones, tablets or electronic devices.
7
Charge function is always enabled as long
as the power adapter is plugged in and
connected.