Operation Manual

15
ENGLISH
Switch on
1 Press and hold the »8« button for 2 seconds to
turn on the unit.
– The Bluetooth LED »A« will start blinking
slowly.
– Now you can ready to pair your device with
the unit.
Bluetooth function
Pairing Bluetooth device
Note:
7
Make sure that AUX IN cable is removed
from the »AUX IN« socket. Otherwise, it
can‘t enter into pairing mode.
1 Press and hold the »8« button for 2 seconds to
turn on the unit.
– The Bluetooth indicator »A« will start blink--
ing slowly.
– Now you can ready to pair your device
with the unit.
2 Activate on the Bluetooth device the Bluetooth
function.
3 Start on the Bluetooth device the search func-
tion.
Note:
7
Enter »0000« when your Bluetooth device
asks for the PIN code.
4 Once paired, the unit will beep and the Blue-
tooth indicator »A« will turn on steadily.
Note:
7
Although the unit can only stream audio from
one device at a time, it is capable of being
paired with up to eight devices..
OPERATING
___________________________________________________________
Connecting a paired Bluetooth
Device
Notes:
7
You will only need to pair your Bluetooth de-
vice with the unit one time.
7
The next time your Bluetooth device and the
unit are in range of each other, and the Blu-
etooth feature is turned on, they will automa-
tically connect.
7
The unit will only automatically connect to
the last Bluetooth Device it was connected
to.
7
If your paired device does not automatically
connect, navigate to the Bluetooth menu on
your device and select the unit from the list.
Play Audio signal from your Blue-
tooth device
1 Press »8« to start playback.
2 Press »8« again to pause playback.
3 Press »8« to resume playback.
4 Press »+« or »–« to adjust the volume.
Notes:
7
Keep in mind that depending on the used
Bluetooth device and the structual condi-
tions the wireless range can be up to 9 m.
7
The volume controls on your Bluetooth de-
vice work separately from the volume con-
trols on the GSB 500.
Disconnect the Bluetooth device
1 Switch off the Bluetooth function at the Blue-
tooth device or press and hold at the GSB 500
»+« and then press briefly »–« in addition to
disconnect.
– The Bluetooth indicator »A« flashes slowly
after disconnect the device.