Operation Manual

19
ENGLISH
TUNER MODE
------------------------------------------------------------------------------------------------------------------------
DAB radio mode
Selecting the DAB radio input
source
1 For the best DAB reception, align the wire an-
tenna accordingly.
2 Select the DAB input source with »MODE« on
the device or »DAB/FM« on the remote con-
trol.
– Display: » DAB « followed by the name of a
DAB station.
Selecting stored stations
1 Select the required station using the number but-
tons »1« to »0« directly.
Note:
7
For two-digit preset numbers, press the
number buttons briefly one after the other.
2 Select the radio station step-by-step by pressing
»G« or »H«.
Displaying DAB station information
1 To briefly display information on the current
DAB station, press »DISPLAY« repeatedly.
– Dependent of the service provider you can
see further information: For example current
artist and title, signal strength, genre, fre-
quency of the service provider and notes on
signal interference (» BER « is displayed for
optimum reception).
Setting Dynamic Range Control
(DRC) for DAB stations
When you activate Dynamic Range Control, you
can hear quiet sounds better in a loud environ-
ment.
1 Open the menu by pressing »MENU
R
«.
3 Select the » DRC « menu item with »E« or »F«
and press »eII OK« to confirm.
– Display: » DRC OFF «.
3 Select » DRC HIGH « or » DRC LOW « option with
»E« or »F« and press »eII OK« to confirm.
4 Close the menu by pressing »MENU
R
«.
Note:
7
The DAB station must support DRC.