Operation Manual

29
ENGLISH
TIMER MODE
--------------------------------------------------------------------------------------------------------------------------
Your device has three timer modes:
– The switch-on timer, which switches the de-
vice on at a preset time and wakes you with
the input source you selected.
– The reminder timer, which reminds you by
sounding the signal tone at a preset time.
– The sleep timer, which switches the device
off at a preset time.
Notes:
7
You can only set the timer mode with the but-
tons on the remote control.
7
The time has to be set on the device.
7
When this setting is being made, if no button
is pushed for more than 10 seconds, the de-
vice will end the process automatically. You
then have to start again.
Switch-on timer
Setting the switch-on timer
1 Press »ON/OFF« on the device or »8« on the
remote control to switch on the device.
2 Press »≈« from the switched off state.
– Display: The hours of the switch-off time
flash.
3 Enter the hours of the switch-on time with »E«
or »F« and confirm with »≈«.
Enter the minutes of the switch-on time with »E«
or »F« and confirm with »≈«.
– Display: the last input source selected flash-
es.
4 Select the input source (BUZZER, CD, SD
CARD, USB, DAB oder FM TUNER) by press,-
ing »E« or »F« and confirm with »≈«.
Notes:
7
If a radio station (DAB or FM) was selected
as the input source, use »G« or »H« to se-
lect a preset.
7
If you selected the signal source CD, SD or
USB and the file is damaged or there is no
CD in the CD compartment or no auxiliary
device is connected, the device automatical-
ly switches on with the signal tone (buzzer).
5 Set the volume with »E« or »F« and confirm
with »≈«.
– Display: »≈« and »§« or »e« and the cur-
rent time.
– The switch-on timer is activated.
Activating and deactivating the
alarm
1 Deactivate the alarm by pressing »≈« once
briefly.
– Display: »§« or »e« disappear when the
switch-on timer is deactivated.