Operation Manual

11
ENGLISH
CONNECTION AND PREPARATION
---------------------------------------
Connecting an MP3 player or a
USB memory stick
The device supports most MP3 players and USB
memory sticks on the market.
Caution:
7
The device must be switched off while the
USB connection is being made. If it is not
switched off, data can be lost.
SD
USB
1 Connect the USB interface of the MP3 player
to the »USB« socket of the device with a stand-
ard USB cable;
or
insert the USB plug of the USB memory stick
into the »USB« socket on the device.
Notes:
7
To remove the MP3 player or the USB mem-
ory stick, switch off the device and pull out
the cable or the data medium.
7
The device's »USB« socket is not suitable for
a USB hub or a computer.
Inserting a memory card
The device supports SD/SDHC and MMC mem-
ory cards.
Caution:
7
The device must be switched off while the
memory card is being inserted. If it is not
switched off, data can be lost.
SD
USB
1 Insert the memory card carefully into the »SD«
card slot with the contacts facing the rear until
it latches into place.
Notes:
7
Do not use excessive force when inserting the
memory card. Only apply slight pressure.
7
The memory cards are resistant to dirt and
moisture, but may only be inserted into the
device in a dry and clean condition.
7
Never remove memory cards during opera-
tion. This can damage the memory card.
This type of damage will invalidate your
warranty.
Removing the memory card
Caution:
7
The device must be switched off while the
memory card is removed. If it is not switched
off, data can be lost.
1 Remove the memory card from the card slot by
pressing the card inwards slightly until the latch
is released. Then pull out the card.