COLOUR TV Cinemo GLCD4000HD Cinemo GLCD4600HD Grundig Helpline: 1800 509 394 Australia Grundig Helpline: 0800 450 259 New Zealand ENGLISH
Contents Installation Remote control handset Controls Battery installation 3 34 35 4 5 Other Menu 36 Connection of PC 37 6 PIP (Picture-In-Picture) Feature Connections of Back panel 7 Connection to External equipment 8-12 Basic operation On and Off Programme selection Volume adjustment On screen language selection 13 13 13 13 On screen menus Menu selection 34-35 4-5 Controls of Front panel Installation Menu Station search Front Light 38-39 Watching PIP PIP Audio input Moving the PIP Su
Location This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air.
Controls Remote control handset Before you use the remote control handset, please install the batteries. 4 - All the functions can be controlled with the remote control handset. - Some functions can also be adjusted with the buttons on the front panel of the set. NUMBER BUTTONS i BUTTON selects a menu. D / E (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. F / G (Volume Up/Down) adjusts the volume. adjusts menu settings.
- Put the two batteries into the compartment observing battery polarity. - Replace the cover. To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period time. Do not use batteries of differing age or type. Always discard of batteries safely. Remote control handset - To insert batteries, turn the remote control handset over and remove the battery cover.
Front panel Controls of - Shown is a simplified representation of the set. - Here shown may be somewhat different from your set. - This manual explains the features available on the Cinemo GLCD4000HD series. 6 5 4 3 1 2 9 1. MAIN POWER switches the set On or Off. 8 6. POWER (r r) switches the set On from standby or On to standby. 2. D / E (Programme Up/Down) selects a programme or a menu item. switches the set On from standby. 7. POWER/STANDBY INDICATOR (r r) illuminates red in standby mode.
8 9 1 2 3 4 5 6 1. HDMI1 INPUT / HDMI2 INPUT / AUDIO INPUT / RGB INPUT SOCKETS Connect the set output socket of the PERSONAL COMPUTER to this socket. 6. POWER CORD SOCKET This set operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the set on DC power. 2. AUDIO INPUT / COMPONENT INPUT (480i / 480p / 576i / 576p / 720p / 1080i / 1080p) SOCKETS 7. AUDIO / VIDEO INPUT (AV4, S-VIDEO) Connect video out from an S-VIDEO VCR to the SVIDEO input.
External equipment Connection to - You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your manufacturers instruction books for specific information. Make sure all connections are made with both your set and additional appliance unplugged from the mains to avoid damaging your equipment. Here shown may be somewhat different from your set.
1 < Back panel of the set > < Back panel of the set > Camcorder For cable TV Connection to 4 Watching external AV source External equipment 3 Watching Cable TV 2 < Back panel of the external equipment > Video game set < Cable Box > - After subscribing for a local cable TV station and installing a converter you can watch cable TV. - For further information of cable TV, contact the local cable TV station. In using connection 1 Select programme number in programme switch of cable box.
External equipment Connection to 5 Watching DVD < Side panel of the set > or < Back panel of a DVD player > How to connect Connect DVD video inputs to Y, PB, PR of COMPONENT (DVD INPUT) and audio inputs to Audio sockets of AUDIO INPUT. How to use Turn on the DVD player, and insert a DVD. Use INPUT SELECT button on the remote control to select COMPONENT. Refer to the DVD player's manual for operating instructions.
< Back panel of the set > Connection to External equipment 6 Connecting HDMI < DVI signal input only> Connect the signal cable from the monitor output socket of the DVD player or Set top Box to the HDMI INPUT socket of the set. Connect the audio cable from the PC to the AUDIO INPUT sockets of the set. HDMI Interface with HDCP Copy Protection enables alldigital rendering of video without the losses.
External equipment Connection to 7 Connecting PC 8 Connecting Digital Audio < Back panel of the set > < Back panel of the set > Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the RGB INPUT socket of the set. Connect the audio cable from the PC to the AUDIO INPUT sockets of the set. - Send the set’s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) Caution : Do not look into the optical output port.
2 4 On and Off Programme selection On screen language selection Press the main power button to switch the set on. You can select a programme number with the D / E or NUMBER buttons. Press the button and then use D / button to select the Installation menu. If the set is in standby mode, press the POWER, D / E buttons on the remote control handset to switch it on fully. E Press the OK button and then use D / E button to select Language.
Menu selection On screen menus - The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. 1 2 Press the button and then use D / E button to display each menu. E 4 Press the OK button and then use D / E button to select a menu item. You can move to the higher level menu with F button and to move to the lower level menu press the G button. 3 Press the OK button to display the sub menu or the pull-down menu.
E Press the OK button and then use Sound. D D / / E E button to select Language selection for dual language broadcast button to select If a programme received in two languages (dual language). DUAL A sends the primary broadcast language to the Press the OK button and then use Sound mode. D / E button to select Press the OK button and then use the desired sound item. D / E button to select Press the E loudspeakers. DUAL B sends the secondary broadcast language to the loudspeakers.
Sound adjustment Setting up TV stations 2 Balance 3 Press the button and then use to select the Settings menu. D / E button Press the Settings menu. Press the OK button and then use to select Sound. D / E button Press the OK button and then use Press the OK button and then use to select Balance. D / E button E E button and then use D / E button to select the D / E button to select Sound. Press the OK button and then use D / E button to select Defaults.
Press the button and then use the Settings menu. button to select Press the OK button and then use D / E button to select the desired sound item. Press the OK button and then use D / E button to select Sound. Press the OK button and then use F / G button to make appropriate adjustments. Press the OK button and then use D / E button to select Equalizer. Press the E D / E E button to return to normal TV viewing. Note : This function works in the User mode.
Sound adjustment Setting up TV stations 5 SPDIF Format (in digital mode only) Press the button and then use the Settings menu. D / E button to select This function lets you select your preferred sound for audio. Press the OK button and then use Sound. D / E button to select Press the button and then use D / E button to select the Settings menu. Press the OK button and then use SPDIF Format.
8 TruSurround ruSurround XT - TruSurround XT technology is incorporated under license form SRS Labs, Inc. - Manufactured under license form Dolby Laboratories. Press the menu. E button and then use D / E button to select the Settings Press the OK button and then use D / E Press the OK button and then use D / Echo sound or TruSurround XT. button to select SRS. E TV Speaker - Turn TV speakers off if using external audio equipment. is a trademark of SRS Labs, Inc.
Picture adjustment Setting up TV stations Defaults 1 Press the button and then use the Settings menu. E / E button to select Press the OK button and then use D / E button to select Picture. Press the OK button and then use D / E button to select Defaults. Press the OK button and then use D / E button to select the desired picture option. Press the E button to return to normal TV viewing. You can also recall a desired picture (Dynamic, Standard, Mild or User) with button on the remote control.
Color temperature 3 Press the button and then use button to select the Settings menu. D Press the OK button and then use button to select Picture. D E / E / E Press the E button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select Picture. Press the OK button and then use D / E button to select Color temper- ature. Press the OK button and then use D / E button to select the desired picture option.
Picture adjustment Setting up TV stations Format 4 Press the button and then use Settings menu. D button to select the / E Press the OK button and then use Picture. D / E button to select Press the OK button and then use Format. D / E button to select E Press the OK button and then use appropriate adjustments. Press the E D / 1 Defaults User Brightness 53 Color 55 Format Contrast 50 16:9 Sharpness 51 H.ZOOM Tint Color temperature Warm Format 16:9 V.ZOOM HV.
With the lock on, the display Child lock on appears on the screen if any button on the front panel is pressed while viewing the TV. Press the button and then use D / E button to select the Settings menu. E Press the OK button and then use D / E button to select Child lock. Note : The display Child lock on will not appear on the screen if any button on the front panel is pressed while displaying the menus. Press the OK button and then use D / E button to select Off or On.
Timer Setting up TV stations Clock 1 - Auto time is set automatically from a digital channel signal. Press the OK button and then use D / E button to select Auto or Manual. Press the button and then use D / E button to select the Settings menu. D /E Press the OK button and then use D / E button to select Press the E Only Manual function; Press the G button and then button to adjust hour and minute. E button to save. Timer. Press the OK button and then use D / E button to select Clock.
On/Off Time The off timer automatically switches the set to standby at the preset time. Press the menu. E Only On time function; Press the G button and then D / E button to adjust volume level and program number. button and then use D / E button to select the Settings Press the Press the OK button and then use D / E button to select Timer. D /E button to select On. To cancel Off/On Time function, press the D /E button to select Off.
Timer Setting up TV stations 3 Time zone (in digital mode only) D. Saving (in digital mode only) The digital channel signal includes information for the current time provided by the broadcasting station. Press the button and then use D / E button to select the Settings menu. Press the menu. Press the OK button and then use ton to select D. Saving. D / E but- Press the OK button and then use ton to select On or Off.
Press the OK button to enter the password as requested. The TV is set with the initial password “0-0-0-0”. Press the button and then use D / E button to select the Settings menu. E Press the OK button and then use D / E button to select DTV option. Press the D Press the E /E button to select type of ratings to block . button to return to normal DTV viewing. Press the OK button and then use D / E button to select Rating.
(in digital mode only) DTV option Menu 2 Rating menu option - No Block All programs can be watched because there is no age limitation. - R & Above (Restricted 18+) Programs are blocked for children under the age of 18. - AV & Above (Adult Audience strong violence 15+) This program contains the strong violent contents. Therefore, programs are blocked for children under the age of 15 - MA & Above (Mature Adult Audience 15+) Programs are blocked for children under the age of 15.
Change the password by inputting a new password twice. Press the OK button to enter the password as requested. Press the button and then use D / E button to select the Settings menu. The TV is set with the initial password “0-0-0-0”. E Press the OK button and then enter a four digit password. Press the OK button and then use D / E button to select DTV option. Enter it again when requested. Press the OK button and then use D / E button to select Set password.
(in digital mode only) DTV option Menu 4 Favorite 5 This function lets you select your favourite programmes directly. Press the button and then use D / E button to select the Settings menu. Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select DTV option. Press the OK button and then use D / E button to select Press the OK button and then use D / E button to select Caption. E E DTV option.
Press the button and then use button to select the Preset list D / E menu. E Press the OK button to display the Preset list menu. Deleting a programme Moving a programme Select a programme to be deleted with the D / E or F / G button. Select a programme to be moved with the D / E or F / G button. Press the Press the button twice. The selected programme is deleted, all the following programmes are shifted up one position. button.
Preset list Menu 1 2 Select a programme to be deleted with the D / E or F / G button. Press the button to display the Edit channel settings menu. Press the D / E button to select Edit name. Press the OK button. Press the D button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z. With the E button you can select in the opposite direction. Select the position by pressing the F / G button and then take your choice of the second character, and so on.
4 Press the Press the Press the OK button and then use select BG, I, DK, M. D / E button to select Finetuning. Press the OK button. Press the F / and sound. G VHF/UHF 21 4 Finetuning 0 5 TV standard P- button to select TV standard.
Installation Menu - Stations can be tuned using automatic or manual modes. - All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1 Station search Press the button and then use D / E button to select the Installation menu. Press the OK button to begin auto programming. All receivable stations are stored. Press the OK button and then use D / E button to select Station search.
Front Light You can switch Front Light LED on or off. Press the button and then use the Installation menu. D Press the OK button and then use Front Light. D E GRUNDIG 1 Settings 2 Preset list 3 Installation 4 PIP 5 Information P+ P- Select and open E D / E button to select button to select Press the OK button. / E button to select Press the OK button to begin auto programming. Installation INFO OK / Press the OK button and then use Light On, Light Off.
Other Menu 36 Sleep timer You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. Press the -/-- button to select the number of minutes. The display ‘ - - - min ’ will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected. Note : a.To view the remaining sleep time, press the -/-- button once. b.
You can adjust horizontal/vertical position, clock, phase, and auto-configure, reset as you prefer. Press the button and then use D / E button to select the Installation menu. Press the OK button and then use D / E button to select PC Control. Press the OK button and then D / E button to select the desired picture item. Press the F / G button to make appropriate adjustments. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
PIP (Picture-in-Picture) Feature 38 - PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image. 1 Watching PIP Press the PIP button to show the sub picture. • Each press of PIP button changes the screen display as shown below.
3 Moving the PIP PIP Audio Input Press the POS button. PIP mode - main and sub picture audio select. Press the POS button repeatedly until desired position is achieved. The sub pictures move clockwise. Press the PIP menu. E button and then D /E Press the OK button and then button to select the D / E button to select D / E button to select Audio Input. Press the OK button and then Main or Sub. Press the E button to return to normal TV viewing.
(In Digital mode only) Information Menu 1 2 Information TV Guide - This function shows the present screen information. - This function shows the interactive programme guide. Press the button and then Information menu. Press the button and then Information menu. E D /E Press the OK button and then button to select the D / E button to select E D /E Press the OK button and then button to select the D / E button to select Information. Information. Press the OK button.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
Teletext Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the D button can be used. 4. The red button permits to return to previous selection. Alternatively the E button can be used.
MODE DOS VGA SVGA XGA SXGA Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 640X350 31.5 70.0 31.5 70.0 37.9 85.0 31.5 60.0 37.8 72.0 37.5 75.0 43.2 85.0 35.1 56.0 37.9 60.0 48.0 72.0 46.9 75.0 53.7 85.0 48.4 60.0 56.4 70.0 60.0 75.0 60.0 85.0 63.9 60.0 75.0 70.0 79.9 75.0 91.1 85.0 47.7 60.0 60.1 75.0 68.5 85.0 1360X768 49.0 60.0 1366X768 49.0 60.0 1600X1200 75.0 60.
Guarantee GUARANTEE Please keep your receipt as proof of purchase. This product is warranted for any defect in materials or workmanship for three years after the original date of purchase. This product is for normal domestic and office use only. This warranty does not cover damage from misuse or neglect, accidental damage, vermin infestation, excessive voltages such us lightning or power surges or any alteration that affects the performance or reliability of the product.
Note 45 EN
Note
Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Troubleshooting No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Incorrect position Vertical bars or stripes on background Horizontal noise Signal Cable message appears Check list Symptoms Try another channel (weak signal) Check aerial (plugged into TV?)
P/NO : MAN07GDP109 (GPN07MA030A, GRUNDIG) PO BOX 6287 Silverwater NSW 1811 http://www.grundig.net.