Operation Manual

17
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Select one of the options by pressing » « or
» « or by turning the Jog-Shuttle and con-
firm by pressing on the Jog-Shuttle or »OK«
on the remote control.
– The menu »Set timezone« appears (only if
»Update from Network« was selected).
Note:
7
If »Update from FM« was selected, con-
tinue from point 7.
5 Select the time zone (ex. »UTC +00:00 Dub-
lin, London«) by pressing » « or » « or by
turning the Jog-Shuttle and confirm by pressing
»OK«.
– Display: »Daylight savings« menu opens.
Time/Date
Daylight savings
ON OFF#
Daylight saving
6 Select Daylight savings (for Central Europe)
by pressing » « or » « or by turning the Jog-
Shuttle to select »ON«, and confirm by press-
ing »OK«.
Winter time is set using »OFF«.
– The menu »Wlan region« appears.
Time/Date
Wlan region
Most of Europe
Canada
USA
Spain
France
7 Select one of the WLAN regions by pressing
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
(This setting depends on the location where
you are operating your Cosmopolit 3.)
– The »SSID« menu appears, and the avail-
able networks (access points) are displayed.
Time/Date
SSID
ED-wifi
rd-linksys
arts-pmd
(Rescan)
Note:
7
If the network name (SSID) is suppressed on
the WLAN router for security reasons, the
network cannot be found. It must then be
entered manually. Cancel the setting using
»8« and continue with the chapter “Special
Settings” – “Manual Configuration”.
Note:
7
If you wish to connect via a LAN cable, select
the option »Wired« using » « or » « or by
turning the Jog-Shuttle, and confirm by press-
ing »OK«. The initial set-up is then finished.
8 Select your wireless network (SSID) by press-
ing » « or » « or by turning the Jog-Shuttle
and confirm by pressing »OK«.
– WEP or WPA Key menu opens, the cursor is
positioned in the first input position.
Time/Date
Key:
0123456789
abcdefghi̇jklmn
opqrstuvyzABCD
DEFGHIJKLMN
BKSP
OK
CANCEL
Note:
7
If the network is encrypted, the network
key (security code WEP or WPA) must be
entered.
9 Enter your wireless security code:
Select the first character (capital and small let-
ters, numbers, symbols) by pressing » «, » «,
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
Repeat the procedure for all characters.
After you finish entering all characters, select
the push button »OK« by pressing » «, » «,
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
– The menu »Internet Setup« appears, the net-
work registration is processed.