GPVR1250 Grundig Helpline: 1800 509 394 Australia Grundig Helpline: 0800 450 259 New Zealand INSTRUCTION MANUAL Digital TV Recorder
Table of Contents Table of Contents ------------------------------------------------------------------------- 1 Introduction------------------------------------------------------------------------------- 2 Safety Information------------------------------------------------------------------------ 3 Remote Control--------------------------------------------------------------------------- 4 Front and Rear Panel Illustration------------------------------------------------------- 6 Connecting to Television Aeria
Introduction About This Manual This User Guide contains all the information you need to know about how to setup and watch free view channels using your set top box. What is DVB-T? It works like traditional TV, but because the signals are digital you need a set top box to convert them. This means more channels can be transmitted with extra features such as interactivity and wide screen pictures.
Safety Information Safety is Important To ensure your safety and the safety of others, please ensure you read the Safety Instructions before you operate this product. Keep this information in a safe place for future reference. Please read all the safety information before use. Safety Considerations Position the cables so that they cannot be walked on or pinched by items placed on or against them. Do not use the set top box in humid or damp conditions. Do not allow the set top box to get wet.
Remote Control Remote Key Function: 1) STANDBY Used to switch the set top box to on or standby. 2) AUDIO Used to set the sound output, the available settings are STEREO, LEFT, RIGHT, MONO. 1 3) SUBTITLE: Used to switch among different subtitles that are broadcasted. 4) TEXT: Used to open teletext OSD display if teletext 2 available in the broadcasted stream. 5) MUTE: Used to turn the sound on or off. 3 15 6) EXIT: Used to return to the previous screen or menu.
Installing the Batteries Remove the battery cover from the remote control and put place 2 x AAA size batteries inside the compartment. Make sure to match the + and - of the batteries with the marks inside the battery compartment 1.Open the cover O PE 2.Install batteries N 3.Close the cover O PE N Using the Remote Control To use the remote control, point it towards the front of the digital set top box.
Front Panel and Rear Panel Illustration 1. Front panel 1 1) 2) 3) 4) 5) 6) 7) 8) 9) 2 3 4 5 6 7 8 9 POWER BUTTON: Used to switch the main power of the set top box to on and off. REMOTE CONTROL SENSOR: Used to receive the signal from the remote control. LED DISPLAY: Used to display the channel number and time information and other play states. VOLUME DOWN: Used to decrease the volume without using the remote control.
Connecting to Television Aerial and RF cable There are 2 kinds of connections for the TV aerial and RF cable presented below: 1. TV Aerial 100-240V~ 50/60Hz Cb R F IN R F LOOP THROUGH R F IN R F LOOP THROUGH PVR TUNER TV TUNER VIDEO Y Cr COAXIAL VIDEO COMPONENT OUT DIGITAL AUDIO OUT L R S-VIDEO AUDIO/VIDEO OUT RS-232 2.
Connecting to a Television MODEL NO: TPVR2511 DVB-T RECEIVER/HDD RECORDER POWER SOURCE: 100-240V ~ 50/60HZ POWER CONSUMPTION: 15W MADE IN CHINA 100-240V~ 50/60Hz SERIAL NO.
Connecting to a Surround Sound System ODEL NO: TPVR2511 VB-T RECEIVER/HDD RECORDER OWER SOURCE: 100-240V ~ 50/60HZ OWER CONSUMPTION: 15W ADE IN CHINA 100-240V~ 50/60Hz SERIAL NO.
Getting Started Switching On for the First Time Ensure all connections have been made following the diagrams on the previous pages for reference. To switch on the set top box, press the button on the set top box. (To turn the set top box to standby mode, press button on the remote control). Switch on the TV and select the AV programme channel(EXT,AV, External Source or similar). Your set top box will automatically scan.
Select the Auto Scan tab by using the arrow and the on the remote control. OK buttons Press the OK button when the Start Search tab is highlighted. The following menu will display.
2. System Setting From here you can set the Time, Sleep timer, Language, Parental settings, A/V settings, PVR setting or revert to the factory settings. Time Setting Press the MENU button and select System Setting option using the arrow buttons. Press the OK button when selected. The following menu will display.
Time Zone Setting Select Time Zone Setting option using the arrow button. Press the button when selected. The following menu will display. OK TimeZone Setting Time Setting Time Setting Language Settings TimeZone Slep Parental Setting GMT+0 GMT+0 GMT+1 A/V Setting GMT+2 PVR Setting GMT+3 Factory Setting GMT+4 System Info OK Press the Press the or Confirm Exit buttons until the correct time zone is displayed. button to confirm your selection.
2 Language Setting Select the Language Setting option using the arrow buttons. Press the OK button when selected. The following menu will display. Language Settings Time Setting English Menu Language Settings Audio English Parental Setting English A/V Setting PVR Setting Factory Setting System Info OK Exit Confirm 3 Parental Setting Select the Parental Setting option using the arrow buttons. Press OK button when selected.
Change Pin Code The Change Pin Code menu allows you to change the password, which currently defaults as 6666 . Enter you new PIN code using the numerical buttons on the remote control. Press the Press the button and enter the new PIN code again. OK button to confirm the new PIN code. Please note that your new PIN code must contain 4 digits. 4 A/V Setting Select the A/V Setting option using the arrow buttons. Press the OK button when selected. The following menu will display.
If NTSC is chosen for your televisions you may experience interference and picture rolling. Video Output The Video Output setting is used to set the colour signal to your TV. There are 3 different settings available on your set top box: S-Video, CVBS, YCbCr. If you are unsure which setting to use consult the manufacturer, s manual for your television. If S-Video/YCbCr is chosen for a non compatible television, you will typically experience a washed out or a ghosted effect picture.
6 Factory Setting Select the Factory Setting option using the arrow buttons. Press the OK button when selected. The following menu will display. Factory Setting Time Setting Language Settings Parental Setting A/V Setting PVR Setting Restore Default Factory Setting Clear Channels System Info OK Exit Confirm Restore Default The Restore Default menu allows you to reset the menu settings. Clear Channels The Clear Channels menu removes all channels from the Channel list.
3. Channel List The channel list is used to look at all the broadcasting TV or Radio channels received by the set top box. To access the channel list press the OK button in the non-menu state. To edit the channel list, press the MENU button and select Channel List using the arrow keys, press the OK button when it's highlighted.
4. Favourite List The favourite list is used to store your frequently watched channels without having to search them in the Channel List or EPG menus. To edit the favourite list, press the MENU button and select Favourite List using the arrow keys, press the OK button when it's highlighted. Favorites List Favorite Group: News No Items FAV Favorite Switch Right-Popup Menu Adding a Favourite Channel First use the RED button to select a favourite group, the choices are News, Movie, MTV, Finance, Other.
5. Booking List The booking list is used to display all the booking events you have in the EPG menu or you have added manually. The booking list menu is displayed below: Booking List ID No Items 15 Start Time 2005.12.28 23:59 Duration(Mins) 120 Type Playback OK Exit Confirm It will display the event ID, start time, duration, purpose(playback or record) for each event.
6. EPG Menu (Electronic Programme Guide) The EPG menu is used to look at what is being broadcast on a TV or Radio channel later in the day. To access the EPG menu, press the MENU button and select the EPG menu using the arrow keys. When it is highlighted press the OK button to access.
Record Operations Before using the record operations, please check the two tuner(TV/PVR tuner) connections in connection pages. Watch One Channel While Recording Another The recording will receive the digital TV signal from the PVR tuner and the watching will receive the digital TV signal from TV tuner, this makes it possible to watch one channel while recording another channel. There are 3 kinds of methods to start a recording: 1).
Help and Advice Problem Probable cause What to do Standby light not lit Mains lead unplugged Mains fuse blown Check mains lead Check fuse No signal found Aerial is disconnected Aerial is damaged/misaligned Out of digital signal area Check aerial lead Check aerial Check with dealer No picture or sound AV connect error Check AV cable Encrypted channel message It is a pay per view channel Select an alternative channel No response from remote control Set top box is switched off Remote control is
Technical Specifications Power Supply Input Voltage 100-240V~ 50/60Hz. Power Consumption Maximum 15W, Standby 5W. Decoder Video Formats SD, 4:3/16:9 Switchable. Audio Format MPEG Layer l & ll,32/44.1/48Khz.
Guarantee Please keep your receipt as proof of purchase. This product is warranted for any defect in materials or workmanship for one year after the original date of purchase. This product is for normal domestic and office use only. This warranty does not cover damage from misuse or neglect, accidental damage, vermin infestation, excessive voltages such as lightning or power surges or any alteration that affects the performance or reliability of the product.