User manual

32
Operating
EN
x Use the up/down buttons to navigate to the “Insert” recor-
ding mode and confirm by pressing “OK”.
x End your selection with the button “Save”.
x Start the recording by
(I)
pressing the recording button and then moving the
slide switch to the “g” position. Dictate the text
which shall be inserted.
(II)
move the slide switch to the “g” position. Dictate
the text which you like to insert.
x Stop the insertion by
(I)
pressing the recording button or by moving the slide
switch either to the “
h” or “i” position.
(II)
move the slide switch to the “e” position.
Overwrite dictation parts
You can overwrite a dictation from any dictation position on.
x Move the slide switch to the “
e” position.
x Select the desired dictation by using the up-down navigati-
on buttons.
x Move the slide switch to the “
f” position, in order to listen to
the dictation.
x Move the slide switch at the respective dictation position to
the “
e” position.
x Control if the overwriting mode is activated.
The overwriting mode is marked by
means of a line in the progress bar.
x If another recording mode is activated, please press the
“RecMode” button.
A list of possible recording modes appears on the display.
x Use the up/down buttons to navigate to the “Overwrite”
recording mode and confirm by pressing “OK”.
x End your selection with the “Save” button.
Overwriting mode