Digital Satellite Receiver DRS 100 CI English Operating Instructions Bedienungsanleitung Grundig SAT SystEms GSS Grundig SAT Systems GmbH Beuthener Strasse 43 D-90471 Nuremberg, Germany Phone: Fax: E-mail: Internet: +49 (0) 911 / 703 8877 +49 (0) 911 / 703 9210 info@gss.tv http://www.gss.
Contents Index .............................................................................................................................4 1 General information ..................................................................................................5 1.1 1.2 1.3 1.4 1.5 Package contents........................................................................................5 Accessories for satellite receivers..................................................................
7 Basic functions ........................................................................................................22 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 Adjusting the volume .................................................................................22 Muting ....................................................................................................22 Selecting channels – numerical preset channel selection................................22 Preset AV channel..................
Index A G S Application of data ............ 29 GMT .................................14 B I Batteries low ....................... 9 Blocking channels ...............21 Blocking the menu ............. 32 Information on reception..... 35 Satellite antenna .................11 Satellite antennas................17 Satellites ............................18 SAT mouse ..................... 8, 11 Scart cable ......................... 5 Screen format .....................15 Sleep timer.......................
1 1.1 General information Package contents • • • • • • 1.2 DRS 100 CI SAT mouse (infrared receiver) Remote control incl. 2 batteries (2 x 1.5 V, Mignon, e.g. UM-3 or AA) Euro-AV cable (scart cable) Mains adapter Operating instructions Accessories for satellite receivers You can find out more about the extensive GSS range of accessories for satellite receiving devices at your specialist dealer or at the website of Grundig SAT Systems GmbH: http://www.gss.tv. 1.
2 Set-up and safety • This digital receiver set is designed to receive and display video and audio signals. Any other use is expressly prohibited. • When setting up the device, make sure the mains socket is easily accessible. • If the digital receiver is subject to a sudden change in temperature, for example when brought in from the cold to a warm room, let it stand for at least two hours before you connect it to the mains supply. • Do not expose the digital receiver to any moisture.
3 Your device at a glance 3.1 The digital receiver CI MODULE Common interface slot. INPUT SAT Antenna socket for the satellite antenna. 12-24 V DC Socket for the supplied mains adapter. RECORDER Euro AV socket (input and output) for the video or DVD recorder TV Euro AV (output) socket for the television. AUDIO OUT R L Left/right stereo output sockets (cinch) for the hifi system. SOFTWARE/MOUSE Socket for SAT mouse or for a PC cable.
3.2 The SAT mouse The SAT mouse receives the infrared signals for the remote control and forwards the commands via cable to the receiver. • Position the SAT mouse visibly so that it can receive the commands by the remote control. Note: – The red operation indicator goes out in standby mode. – The operation indicator flashes if a timer has been set and the receiver is in standby mode. 3.
Inserting batteries in the remote control • Open the battery compartment and remove the lid. • Insert the batteries (Mignon, e.g. UM-3 or AA, 2 x 1.5 V). Observe the polarity marked in the battery compartment base. • Close the battery compartment. Notes: – If the digital receiver no longer reacts properly to remote control commands or if the message “Low Battery!” appears, we recommend that the batteries are changed. – Always remove used batteries.
Switching the remote control to SAT 2 level You can switch the remote control permanently to the SAT 2 remote control level. • Press the button SAT and hold. • At the same time press the buttons 4, 5, 6. To return to SAT 1 remote control level • Press the button SAT and hold. • At the same time press the buttons 1, 2, 3. • To finish your setting: press MENU. 4 Connecting the device Overview SAT TV R RECORDER TV DIGITAL AUDIO OUT SOFTWARE/ AUDIO MOUSE OUT R L DEC.
4.1 Connecting the satellite antenna 1 4.2 Connecting the television 2 4.3 • Connect the antenna cable to the INPUT SAT 1 socket on the digital receiver (screw connector, F-connector). • Plug the Euro-AV cable into the TV 2 socket on the digital receiver and into the corresponding Euro-AV socket on the television. Connecting the AV recorder/player 3 • Plug the commercial Euro-AV cable into the RECORDER 3 socket on the digital receiver and into the Euro-AV socket on the AV recorder/player (e.g.
4.5 Connecting the hifi system 5 4.6 Connecting the digital multi-channel amplifier (SPDIF) 6 4.7 • Plug a commercial cinch cable into the AUDIO OUT R L (right/left) 5 sockets on the digital receiver and the corresponding input sockets on the hifi system. • Remove the socket cover. • Plug a commercial optical cable (SPDIF) into the DIGITAL AUDIO OUT 6 socket on the digital receiver and the corresponding socket on the digital multi-channel amplifier.
5 Preparations Note: Your digital receiver was set at the factory so that it is ready for operation once you have connected it and to receive Astra channels. If required, you only need to correct the local time difference, adjust the LNB settings for receiving more satellites and select the menu language (default is “German”, “Single LNB”). 5.1 Switching the receiver on and off • Switch the television to AV.
– On closing the menu function, your settings are automatically saved. – You return to the previous menu via Z. – To close the menu function press MENU. Note: In menu mode, you cannot press receiver to standby. 5.3 Setting the menu language Language, Time Language Time Offset Deutsch Deutsch English GMT +1 Stunde Cesky Türkce Español OK 5.4 to switch the digital Select MENU Z Exit Back • Press MENU to open the main menu. • Select “System Setup” with ▼/▲ and press OK to confirm.
5.5 Adjusting the digital receiver to the television set Setting the video signal for the Euro-AV output You can choose between the settings “CVBS” (normal picture quality, factory setting), “RGB” (high picture quality) and “YUV” (e.g. for a connected beamer or LCD TV set). TV Setup Picture Format RGB RGB CVBS YUV Auto WSS On Teletext West IR Level SAT 1 Cinch Audio Fixed TV OK MENU Select Z Exit Back • Select “System Setup” in the main menu with ▼/▲ and press OK to confirm.
Automatic picture format identification If problems with the automatic picture format switchover (e.g. 4:3, 16:9, Letterbox) arise with the connected device, you can switch off Wide-Screen-Signaling (WSS) in this menu. • Use ▼/▲ in the main menu to select “System Setup” and press OK to confirm. • Select “TV Setup” with ▼/▲ and press OK to confirm. • Use ▼/▲ to select “WSS” and press OK to confirm. • Use ▼/▲ to switch WSS on/off. • To return to the previous menu: press the Z button.
5.6 Adjusting the digital receiver to the satellite antenna This digital receiver was factory set so that it is ready for operation with most satellite antennas and LNB configurations. Changes in this menu have a direct effect on the reception characteristics of the digital receiver and should therefore only be made by an expert. System Setup • Select “System Setup” in the main menu with ▼/▲ and press OK to confirm. • Select “LNB Settings” in the “System Setup” menu with ▼/▲ and press OK to confirm.
• Use ◀/▶ to place the cursor under the number to be changed. —> Enter value with 1 … 0. • Press OK to confirm. • To return to the previous menu: press the Z button. • To finish your setting: press MENU. Receiving signals from two or more satellites LNB Settings LNB System SAT System 1 OK Off Einzeln Single Astra Tone Burst DiSEqC 1.
5.7 Reception of signals from encoded satellite channels This digital receiver has a common interface (CI) slot. It allows you to connect a CI module for various encryption systems and broadcasting stations. Encoded channels can only be viewed with a CI module suitable for the encoding system and the corresponding smart card. The smart card has all the functions for authorization, decoding and subscription. Note: Follow the operating instructions of the corresponding manufacturer for the CI module.
6 Editing channel lists This menu is for changing the order of the preset TV and RA (Radio) channels as desired, deleting channels you do not need and locking channels. You can select your favourite channels and save them in four separate lists of favourites. • Select “Channel List” in the “Main Menu” with ▼/▲ and press OK to confirm. – The TV Channel list appears. • To change channel lists: press the TV/R button repeatedly.
6.2 Deleting channels Note: If a channel is deleted from a TV or radio channel (RA) list, it is also deleted from the list of favourites. If a channel is deleted from one of the lists of favourites, the channels still remain in the TV / radio channel list. Channel List 1 1 Das Erste 2 SAT.1 3 RTL Television Are you sure? 4 RTL2 Yes No 5 ZDF 6 Super RTL 7 VOX 8 Pro Sieben TVR i TV/RA... Info Protect 6.3 Execute Sort Exit Back MENU Z Moving channels Channel List TV 1 1 Das Erste 2 SAT.
6.5 Undoing the channel lock • Select the locked channel in the channel list with TV/R and ▼/▲. • Press the (blue) button – “Input Password” appears. • Enter the password with 1 … 0. • Confirm the “undo” channel lock action with MENU. 7 Basic functions 7.1 Adjusting the volume Notes: – You cannot adjust the volume in menu mode. – The changes in volume refer to the level of the audio signals at the “TV” output socket of the receiver. • Use ◀/▶ to set the volume.
7.4 Preset AV channel As soon as the set connected to the socket “RECORDER” is activated and provides a switching voltage the Digital Receiver switches to AV operation. • To select a preset AV channel manually: press the 0 button. – The device switches to the external signal at the “RECORDER” input. • To switch back to TV mode: press the 0 button again. 7.
7.8 Selecting locked channels If you select a locked channel, you will only see the channel name with a key symbol. By entering the password, you can activate locked channels until the next time the device is switched off (see also page 22, chapter “Undoing the channel lock”). • Use ▼/▲ or 1 … 0 to select a preset channel. – “Input Password” appears. – If “Input Password” is not displayed, press OK to call the text message. • Enter the password with 1 … 0.
Note: If a stereo transmission is faulty, the left stereo channel might transmit a different language than the right one. • Use A/B to change stereo channels. 7.11 Teletext Teletext is a service offered by some broadcasters that is provided along with the video and audio signals. These signals are converted by the digital receiver and can be displayed on the TV screen as teletext. ENGLISH • Select the TV channel for which you wish to view teletext with 1 … 0 or ▼/▲. • To open teletext: press TXT.
8 Updating the channel list Preset channel lists This digital receiver was programmed at the factory with most digital TV and RADIO channels on the Astra 19.2° East, EutelSat/Hotbird 13° East and Turksat 1C satellites. You can open the corresponding lists in the “Channel List” by pressing ◀/▶. Because there are new satellite channels every now and then or because satellite data is changed, it is advisable to occasionally start an automatic search on the digital receiver and update the channel lists.
Manual Channel search If the channel search does not automatically find a particular channel, you can set it using the manual search. To do so, enter all the parameters of the channel you are looking for. You can find the latest transponder data on the teletext pages of various broadcasters, in a new satellite TV magazine or on the Internet.
9 Electronic programme guide (EPG) The electronic programme guide provides information on the current programme such as the title and a short description. You can also list the following programmes and call up the corresponding descriptions. 9.1 Displaying programme information • To display information on the current programme: Press the EPG button. • Press EPG again. – The first table with the following programmes is displayed. • Use ◀/▶ to open other tables. • Use ▼/▲ to select a programme.
10 Timer functions Your digital receiver has a sleep timer for switching off your device at a defined time. Furthermore your digital receiver has 6 timer positions that you can set manually or automatically by applying the data selected in the EPG. 10.
TIMER Date Prog Start Stop Timer 1 22/07 TV 0001 22:00 – 23:00 Timer 2 Mon TV 0012 17:15 – 18:00 Timer 3 Mo – Fr Timer 4 Mo – Su RA 0001 06:00 – 08:00 Timer 5 Mo – Sa TV 0006 20:00 – 20:15 Timer 6 24/ 07 1 0008 18:45 – 19:00 -- ---- --:-- – --:-- Pro Sieben Daily MENU Z End Back • Use ▼/▲ or 0 … 9 to set the day of switching on. Move the cursor on (month) and use ▼/▲ or 0 … 9 to set the month.
Note: – If you want to record channels via your video or DVD recorder, these devices must be programmed accordingly. – If you use the electronic programme guide (EPG), the data is transferred automatically. 10.4 Setting (lead time / follow-up time) options This menu enables the individual shifting of the actual switch-on and switch-off times in both directions (lead time and follow-up time), regardless of the preset switch-on and switch-off times.
11 Special functions 11.1 Hotel mode – The “Hotel Mode” menu is for locking all access to the menus and limiting the volume to a maximum level. – The default password is “0 0 0 0”. 11.1.1 Locking the menu • Use ▼/▲ in the main menu to select “System Setup” and press OK to confirm. • Use ▼/▲ to activate “Hotel Mode” and press OK to confirm. • Enter the 4-digit password.
11.1.3 Removing the menu lock • Press the Menu button for approx. 5 seconds. • Enter the 4-digit password. • In the main menu that appears use ▼/▲ to select “System Setup” and press OK to confirm. • Use ▼/▲ to activate “Hotel Mode” and press OK to confirm. • Enter the 4-digit password. • Confirm “Menu” in the “Hotel Mode” menu with OK or select “Menu” with ▼/▲ and press OK to confirm. • Use ▼/▲ to activate “Normal” and press OK to confirm. • To save and finish your setting: press MENU. 11.
11.4 Updating software The software for the digital receiver is provided by the Astra 19.2° East satellite. The digital receiver is designed so that you can update its operating software and certain channel information directly using this satellite. • Select “Software Update” in the main menu with ▼/▲ and press OK to confirm. – The digital receiver starts the search for new and then checks whether the software used in the digital receiver needs to be updated.
11.5 Deleting channel lists You can completely delete channels from the channel lists and lists of favourites. • Use ▼/▲ in the main menu to select “System Setup” and press OK to confirm. • Use ▼/▲ to activate “Clear Channel List” and press OK to confirm. • Use ◀/▶ to select “Yes” and press OK to confirm. – To interrupt deleting select “No”. • To finish the procedure: press MENU.
12.3 Technical data This product complies with the following EU directives: 73/23/EEC and 89/336/EEC. It complies with the standard required for CE labelling EN 55013: 1990 incl. A12: 1994, A13: 1996, A14: 1999, EN 55020: 1994 incl. A11: 1996, A12, A13, A14: 1999, EN 60065: 1998, EN 61000-3-2: 1995 incl. A14: 2000, EN 61000-3-3: 1995.
12.5 Troubleshooting Please observe the following information first in the event of an error. If you are unable to rectify the fault using the information given here, please contact your local dealer or service specialist. Never under any circumstances attempt to repair the digital receiver yourself. That would invalidate any warranty claims.
- 38 -
- 39 -
Subject to change. Technical data subject to change. Alterations reserved. Technical data E. & O.E.