Operation Manual

- 15 -
- 15 -
ENGLISH
5.5 Adjusting the digital receiver to the television set
Setting the video signal for the Euro-AV output
You can choose between the settings “ CVBS” (normal pic-
ture quality, factory setting), “ RGB” (high picture quality)
and “ YUV” (e.g. for a connected beamer or LCD TV set).
TV Setup
Exit
Select
Back
OK
TV
Picture Format
WSS
Teletext
IR Level
Cinch Audio
RGB
Auto
On
West
SAT 1
Fixed
MENU
Z
RGB
CVBS
YUV
• Select “ System Setup” in the main menu with ▼/▲ and
press OK to confirm.
• Select “TV Setup” with
▼/▲ and press OK to confirm.
• Select “TV” with
▼/▲ and then press OK to confirm.
• Use
▼/▲ to select “RGB”, “CVBS” or “ YUV” and press OK
to confirm.
Note:
For the settings “RGB” and “ YUV” the TV set has to be pre-
pared appropriately.
• To return to the previous menu: press the Z button.
• To finish your setting: press MENU.
Setting the screen format for the television
If you have a “standard” 4:3 format television, select the
“4:3” setting. If you have a 16:9 format screen, select the
“Auto” setting.
TV Setup
Exit
Select
Back
OK
RGB
Auto
SAT 1
MENU
Z
4:3
Auto
TV
Picture Format
WSS
Teletext
IR Level
Cinch Audio
West
SAT 1
Fixed
• Select “System Setup” in the main menu with ▼/▲ and
press OK to confirm.
• Select “TV Setup” with
▼/▲ and press OK to confirm.
• Select “Picture Format” with
▼/▲ and then press OK to
confirm.
• Use
▼/▲ to select the desired screen format and press OK
to confirm.
• To return to the previous menu: press the Z button.
• To finish your setting: press MENU.