Operation Manual
- 18 -
- 18 -
•
Use ◀/▶ to place the cursor under the
number to be changed.
—> Enter value with 1 … 0.
• Press OK to confirm.
• To return to the previous menu: press the Z button.
• To finish your setting: press MENU.
Receiving signals from two or more satellites
• Select “LNB System” in the “LNB Settings” menu with
▼/▲
and press OK to confirm.
• Use
▼/▲ to select “Tone Burst” for 2 satellites or
“DiSEqC 1.0” for up to 4 satellites and press OK to confirm.
• Select “SAT System 1” with
▼/▲ and press OK to confirm.
• Use
▼/▲ to select the item to be changed and press OK to
confirm:
– “Name“ Change satellite name.
• Use
◀/▶ to place the cursor under
the letter to be changed.
• Use
▼/▲ to set letters.
• Press OK to confirm.
– “LNB Type“ • Use
▼/▲ to select the LNB that is
used.
• Press OK to confirm.
– “Oscillator Low“ • Set the oscillator frequency
(Low band).
• Use
◀/▶ to place the cursor under
the number to be changed.
—> Enter value with 1 … 0.
• Press OK to confirm.
– “Oscillator High“ • Set the oscillator frequency
(High band).
• Use
◀/▶ to place the cursor under
the number to be changed.
—> Enter value with 1 … 0.
• Press OK to confirm.
– “Tone Burst“ or “DiSEqC”
• Use
▼/▲ to assign the LNB to the
input for the Tone Burst (A/B) or
DiSEqC switch (A … D).
• Press OK to confirm.
•
Repeat the setting for all satellites “SAT System 2” etc.
• To return to the previous menu: press the Z button.
• To finish your setting: press MENU.
Exit
Select
Back
OK
MENU
Z
SAT System 1
LNB Type
Oscillator Low
Oscillator High
Tone Burst
Astra
Low + High Band
09750 MHz
10600 MHz
A
Name
LNB Settings
Exit
Select
Back
OK
LNB System
SAT System 1
Einzeln
Astra
MENU
Z
Off
DiSEqC 1.0
Single
Tone Burst