Operation Manual

- 19 -
- 19 -
ENGLISH
5.7 Reception of signals from encoded satellite channels
This digital receiver has a common interface (CI) slot. It allows you to connect a CI
module for various encryption systems and broadcasting stations. Encoded channels
can only be viewed with a CI module suitable for the encoding system and the corre-
sponding smart card. The smart card has all the functions for authorization, decoding
and subscription.
Note:
Follow the operating instructions of the corresponding manufacturer for the CI
module.
• Insert the smart card into the CI module in such a way that
the chip on the smart card faces the thicker side (top) of the
CI module (1.).
• Rotate CI module with inserted smart card 180° around the
longitudinal axis (bottom facing upwards, see illustration op-
posite).
• Insert the CI module with the bottom facing upwards into the
common interface slot “CI-MODULE” (2.).
1.
2.
• Use ▼/▲ in the main menu to select “CI-Module” and press
OK to confirm.
– A menu generated by the CI-module appears on the
screen. For information on how to use the CI-module, see
its operating instructions.
• To return to the previous menu: press the Z button.
• To finish your setting: press MENU.
Main Menu
Exit
Select
Back
OK
1 Channel List
2 System Setup
3 Channel Search
4 Timer
5 Sleep-Timer
6 Software Update
7 CI-Module
MENU
Z
Note:
If “Camera” is displayed in a channel window, this means
that sub-programmes are available.
• To open sub-programmes: press OK.
• Select the desired channel with
▼/▲ and ◀/▶ and
press OK to open.
1 General information
3 Film 2 – 11:00
2 Film 1 – 10:10
5 Film 4 – 10:40
4 Film 3 – 10:30
6 Film 5 – 10:00
8 Film 7 – 10:30
7 Film 6 – 13:00
9 Film 8 – 10:00