Operation Manual

- 23 -
- 23 -
ENGLISH
7.4 Preset AV channel
As soon as the set connected to the socket “ RECORDER ” is
activated and provides a switching voltage the Digital Re-
ceiver switches to AV operation.
• To select a preset AV channel manually: press the 0 button.
– The device switches to the external signal at the
“RECORDER” input.
• To switch back to TV mode: press the 0 button again.
7.5 Selecting channels from the TV/radio channel lists
You can choose between the channel lists
– TV (TV channels),
– RA (radio channels) and
– 4 lists of favourites.
Lists of favourites without channels are not displayed.
• Select the desired channel list with TV/R.
• Use
▼/▲ and ◀/▶ to select a channel and press OK to
open.
7.6 Selecting channels from the list
• Open the channel list with OK.
• Use
▼/▲ and ◀/▶ to select a channel and press OK to
open.
7.7 Alphanumerical program selection – entering letters
You can select channels by entering their channel names.
For this purpose the numbers 2 … 9 on the remote control
are assigned to groups of letters.
• Open the channel list with OK.
• Press 0 to activate the input of letters.
• Press 2 … 9 to enter the first letter of the channel name
(e.g. 9 for the letter Z, 3 for the letter D etc.).
– A list of all the channels beginning with the letters W, X,
Y or Z appears on the screen.
– With each additional letter entered, the list of channels
displayed is reduced.
• Select the desired channel with
▼/▲ and ◀/▶ and press
OK to open it.